If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying
(A) Sine of the angle of inclination with vertical
(B) Cosine of the angle of inclination with vertical
(C) Tangent of the angle of inclination with vertical
(D) Calibration coefficient of the gauge
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Description : The length of a traverse leg may be obtained by multiplying the latitude and (A) Secant of its reduced bearing (B) Sine of its reduced bearing (C) Cosine of its reduced bearing (D) Tangent of its reduced bearing

Last Answer : (A) Secant of its reduced bearing

If D is the degree of the curve of radius R, the exact length of its specified chord, is (A) Radius of the curve × sine of half the degree (B) Diameter of the curve × sine of half the degree (C) Diameter of the curve × cosine of half the degree (D) Diameter of the curve × tangent of half the degree

Description : If D is the degree of the curve of radius R, the exact length of its specified chord, is (A) Radius of the curve sine of half the degree (B) Diameter of the curve sine of half the ... Diameter of the curve cosine of half the degree (D) Diameter of the curve tangent of half the degree

Last Answer : (B) Diameter of the curve × sine of half the degree

Which one of the following statements is not correct? (A) The tangent of the angle of friction is equal to coefficient of friction (B) The angle of repose is equal to angle of friction (C) The tangent of the angle of repose is equal to coefficient of friction (D) The sine of the angle of repose is equal to coefficient to friction

Description : Which one of the following statements is not correct?  (A) The tangent of the angle of friction is equal to coefficient of friction  (B) The angle of repose is equal to angle of ... coefficient of friction  (D) The sine of the angle of repose is equal to coefficient to friction

Last Answer : (D) The sine of the angle of repose is equal to coefficient to friction

A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Last Answer : c. 0.8 m

The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these regions and find its area .

Description : The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these regions and find its area .

Last Answer : The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these ... ` C. `3 sqrt2` D. `4 sqrt2`

Why do sine and cosine have values at 90° and 0°?

Description : Why do sine and cosine have values at 90° and 0°?

Last Answer : There is no premise that a trigonometric function can only be applied in a right triangle. How would it be possible to talk about trigonometric functions of angles greater than 180? Sine and cosine are simply ... projection, its cosine is zero. Similarly, for the sine of a 90 degree angle being 1.

The phase difference between sine and cosine function for a given wave form is

Description : The phase difference between sine and cosine function for a given wave form is

Last Answer : The phase difference between sine and cosine function for a given wave form is 900

Tangent of angle of friction is equal to (A) Kinetic friction (B) Limiting friction (C) Angle of repose (D) Coefficient of friction

Description : Tangent of angle of friction is equal to (A) Kinetic friction (B) Limiting friction (C) Angle of repose (D) Coefficient of friction

Last Answer : (D) Coefficient of friction

A stilling well is required when the stage measurement is made by employing : a) Bubble gauge b) Float gauge recorder c) Vertical staff gauge d) Inclined staff gauge

Description : A stilling well is required when the stage measurement is made by employing : a) Bubble gauge b) Float gauge recorder c) Vertical staff gauge d) Inclined staff gauge

Last Answer : b) Float gauge recorder

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Description : When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Last Answer : (2) a line perpendicular to the plane of rotation

Find the inclination from X-axis of the tangent drawn of the following curves at the given points: (i) Curve`x^(2)-2y^(2)=8` at point (4, 2) (ii) Curv

Description : Find the inclination from X-axis of the tangent drawn of the following curves at the given points: (i) Curve`x^(2)-2y^(2)=8` at point (4, 2) (ii) Curv

Last Answer : Find the inclination from X-axis of the tangent drawn of the following curves at the given points: (i) Curve`x^(2)- ... `y^(2)=2x^(3)` at point (2, 4)

The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant of the normal reaction and the limiting friction c.The tangent of the angle of the net resultant force with the direction of motion d.The tangent of the angle between the horizontal plane and the resultant force e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Description : The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant ... e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Last Answer : a. The tangent of the angle between the normal reaction and direction of limiting friction

Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix angle c) Coefficient of friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Description : Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix ... friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Last Answer : c) Coefficient of friction is equal to or greater than the tangent of the helix angle

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Description : The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

Last Answer : Answer: Option A

If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Description : If is the stadia distance, is the focal length and is the distance between the objective and vertical axis of the techeometer, the multiplying constant, is (A) f/i (B) i/f (C) (f + d) (D) f/d

Last Answer : (A) f/i

The approximate formula for radial or perpendicular offsets from the tangent, is (A) x/2R (B) x²/2R (C) x/R (D) x²/R

Description : The approximate formula for radial or perpendicular offsets from the tangent, is (A) x/2R (B) x²/2R (C) x/R (D) x²/R

Last Answer : (B) x²/2R

Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Description : Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Last Answer : (D) Four times the shift

Explain the process of calibration of pressure gauge by Dead Weight Tester.

Description : Explain the process of calibration of pressure gauge by Dead Weight Tester.

Last Answer : Deadweight Testers (DWT) are the primary standard for pressure measurement. A dead weight tester is an instrument that calibrates pressure by determining the weight of force divided by the area the force ... at each gauge reading and ensure that it is within the acceptable accuracy limits.

What is pressure calibration? State stepwise procedure to test the accuracy of pressure gauge with dead weight tester.

Description : What is pressure calibration? State stepwise procedure to test the accuracy of pressure gauge with dead weight tester.

Last Answer : Explanation- The handle is fully drawn out and the oil is allowed to enter in the cylinder (i.e. gauge and piston). A known accurate weight is placed on the platform. The area of ... reduce the friction between the piston and cylinder, the piston is gradually rotated while a reading being taken

Least force required to draw a body up the inclined plane is W sin (plane inclination + friction angle) applied in the direction (A) Along the plane (B) Horizontally (C) Vertically(D) At an angle equal to the angle of friction to the inclined plane

Description : Least force required to draw a body up the inclined plane is W sin (plane inclination + friction  angle) applied in the direction  (A) Along the plane  (B) Horizontally  (C) Vertically  (D) At an angle equal to the angle of friction to the inclined plane 

Last Answer : (D) At an angle equal to the angle of friction to the inclined plane 

divide wall is provided (A) At right angle to the axis of weir (B) Parallel to the axis of weir and upstream of it (C) Parallel to the axis of weir and downstream of it (D) At an inclination to the axis of weir

Description : divide wall is provided (A) At right angle to the axis of weir (B) Parallel to the axis of weir and upstream of it (C) Parallel to the axis of weir and downstream of it (D) At an inclination to the axis of weir

Last Answer : Answer: Option A

An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Description : An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Last Answer : Answer: Option C

On a pavement with parabolic camber, the angle of inclination of the vehicles will be (A) More at the crown (B) Less at the edges(C) More at the edges (D) Same at the edges as well as at the crown

Description : On a pavement with parabolic camber, the angle of inclination of the vehicles will be (A) More at the crown (B) Less at the edges (C) More at the edges (D) Same at the edges as well as at the crown

Last Answer : Answer: Option C

Find the slope and inclination of the line which passes through the points (1, 2) and (5, 6) ? -Maths 9th

Description : Find the slope and inclination of the line which passes through the points (1, 2) and (5, 6) ? -Maths 9th

Last Answer : Let A ≡ (x, y), B ≡ (2, 1), C ≡ (3, -2) Area of ΔABC = \(rac{1}{2}\) |{x1 (y2 - y3) + x2(y3 - y1) + x3(y1 - y2)}|= \(rac{1}{2}\) | \(x\)(1 + 2) + 2(-2 - y) + 3(y - 1) | = \(rac{1}{2 ... \(rac{3}{2}\)∴ Co-ordinates of A are \(\bigg(rac{7}{2},rac{13}{2}\bigg)\) or \(\bigg(rac{-3}{2},rac{3}{2}\bigg)\)

Rankine's deflection angle in minutes is obtained by multiplying the length of the chord by (A) Degree of the curve (B) Square of the degree of the curve (C) Inverse of the degree of the curve (D) None of these

Description : Rankine's deflection angle in minutes is obtained by multiplying the length of the chord by (A) Degree of the curve (B) Square of the degree of the curve (C) Inverse of the degree of the curve (D) None of these

Last Answer : (A) Degree of the curve

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Which of the following statements are true? i) reactive current is necessary to build up the flux for the magnetic field of inductive devices ii) some portion of reactive current is converted into work iii) the cosine of angle between kVA and kVAr vector is called power factor iv) the cosine of angle between kW and kVA vector is called power factor a) i & iv b) ii & iii c) i & iii d) iii & iv

Description : Which of the following statements are true? i) reactive current is necessary to build up the flux for the magnetic field of inductive devices ii) some portion of reactive current is converted into work iii) the cosine of angle ... called power factor a) i & iv b) ii & iii c) i & iii d) iii & iv

Last Answer : a) i & iv

The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Description : The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Last Answer : In parllpar reasonans RLC circuit the current is

According to law of triangle of forces (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to law of triangle of forces  (A) Three forces acting at a point will be in equilibrium  (B) Three forces acting at a point can be represented by a triangle, each side ... point are in equilibrium, each force is proportional to the sine of  the angle between the other two 

Last Answer : (C) If three forces acting upon a particle are represented in magnitude and direction by the  sides of a triangle, taken in order, they will be in equilibrium

According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to force (C) If three forces acting upon a particle are represented in magnitude and direction by the sides of a triangle, taken in order, they will be in equilibrium (D) If three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two

Description : According to Lami's theorem (A) Three forces acting at a point will be in equilibrium (B) Three forces acting at a point can be represented by a triangle, each side being proportional to ... point are in equilibrium, each force is proportional to the sine of the angle between the other two

Last Answer : Answer: Option D

When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output:

Description : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: (1) Has no offset (2) Approaches to triangular waveshape (3) Is pure sinusoidal (4) Is square wave 

Last Answer : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: Approaches to triangular waveshape

What calibration label is used when actual measurement values must be known to use the test equipment?

Description : What calibration label is used when actual measurement values must be known to use the test equipment?

Last Answer : CALIBRATED—REFER TO REPORT.

The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Description : The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Last Answer : D. Intensity of the peak

Explain calibration of capacitive type level measurement.

Description : Explain calibration of capacitive type level measurement.

Last Answer : ➢ Calibration of capacitance type level transmitter 1. Remove the level transmitter from the system(tank). 2. check whether transmitter shows zero reading by connecting with multimeter otherwise release the ... rotate the span screw to 20ma. 3. Repeat these steps and check all readings

If is the length of a sub-chord and is the radius of simple curve, the angle of deflection between its tangent and sub-chord, in minutes, is equal to (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R

Description : If is the length of a sub-chord and is the radius of simple curve, the angle of deflection  between its tangent and sub-chord, in minutes, is equal to  (A) 573 S/R (B) 573 R/S (C) 1718.9 R/S (D) 1718.9 S/R

Last Answer : (D) 1718.9 S/R

Operation of McLeod gauge used for low pressure measurement is based on the principle of (A) Gas law (B) Boyle's law (C) Charles law

Description : Operation of McLeod gauge used for low pressure measurement is based on the principle of (A) Gas law (B) Boyle's law (C) Charles law

Last Answer : Answer: Option B

If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Description : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Last Answer : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the ... D. `x^(2)+y^(2)+6x+1=0`

If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Description : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Last Answer : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the ... 0` D. `x^(2)+y^(2)-8y=0`

Find the co-ordinates of that point on the curve`y^(2)=x^(2)(1-x)` at which the tangent drawn is perpendicular to X-axis.

Description : Find the co-ordinates of that point on the curve`y^(2)=x^(2)(1-x)` at which the tangent drawn is perpendicular to X-axis.

Last Answer : Find the co-ordinates of that point on the curve`y^(2)=x^(2)(1-x)` at which the tangent drawn is perpendicular to X-axis.

If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : D

The angle of intersection of a curve is the angle between (A) Back tangent and forward tangent (B) Prolongation of back tangent and forward tangent (C) Forward tangent and long chord (D) Back tangent and long chord

Description : The angle of intersection of a curve is the angle between (A) Back tangent and forward tangent (B) Prolongation of back tangent and forward tangent (C) Forward tangent and long chord (D) Back tangent and long chord

Last Answer : (A) Back tangent and forward tangent

In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is (A) 2 (B) 3 (C) 4/3 (D) 3/2

Description : In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is (A) 2 (B) 3 (C) 4/3 (D) 3/2

Last Answer : (D) 3/2

Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (D) The friction force acting when the body is in motion

Limiting force of friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and limiting friction (B) Ratio of limiting friction and normal reaction(C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Limiting force of friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (C) The friction force acting when the body is just about to move

Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 degree (C) For every degree decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Last Answer : Answer: Option D

If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'

Description : If the radius of a main curve is 300 m and length of the transition curve is 100 m, the angle with tangent to locate the junction point, is (A) 1° 11' (B) 2° 11' (C) 3° 11' (D) 4° 11'

Last Answer : Answer: Option C

In a purely cohesive soil, the critical centre lies at the intersection of (A) Perpendicular bisector of slope and the locus of the centre (B) Perpendicular drawn at 1/3rd slope from toe and the locus of the centre (C) Perpendicular drawn at 2/3rd slope from toe and the locus of the centre (D) Directional angles

Description : In a purely cohesive soil, the critical centre lies at the intersection of (A) Perpendicular bisector of slope and the locus of the centre (B) Perpendicular drawn at 1/3rd slope from toe and the ... C) Perpendicular drawn at 2/3rd slope from toe and the locus of the centre (D) Directional angles

Last Answer : Answer: Option D