In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

In optical reading instruments
(A) The vertical circle is usually continuous from 0° to 359°
(B) The readings increase when the telescope is elevated in the face left position
(C) The readings decrease when the telescope is elevated in the face right position
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

Pick up the correct statement from the following: (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit (B) When the vertical circle is to the left of the telescope during observation, it is called to be in left face (C) When the vertical circle is to the right of the telescope during observation, it is called to be in right face (D) All the above

Description : Pick up the correct statement from the following:  (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit  (B) When the vertical circle is to the left of ... the telescope during observation, it is called to be  in right face  (D) All the above 

Last Answer : (D) All the above 

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

Which of the following statement(s) is/are true concerning the pulmonary response to shock? a. The acute pulmonary vascular response to shock differs markedly from that of systemic vasculature b. The pulmonary edema of ARDS occurs in the face of elevated left heart pressures c. The initial physiologic changes of ARDS involve the capillary endothelial cells and the type I pneumocyte d. Mechanisms proposed in the pathogenesis of ARDS include injury from mediators of inflammation elsewhere and from activated cellular elements e. A decrease in lung compliance may result from the loss of type I pneumocytes

Description : Which of the following statement(s) is/are true concerning the pulmonary response to shock? a. The acute pulmonary vascular response to shock differs markedly from that of systemic vasculature b. The ... elements e. A decrease in lung compliance may result from the loss of type I pneumocytes

Last Answer : Answer: c, d, e Contributing pathophysiologic processes to the pulmonary manifestations of shock include the pulmonary component of the cardiovascular response, disruption of the normal ... injury from mediators of inflammation elaborated elsewhere, and from activated cellular blood elements

Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the readings of the two verniers gives correct reading free from the eccentricity (C) One Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Description : Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the ... Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Description : If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Last Answer : (D) 360°

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Last Answer : (C) 45°

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Description : If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Last Answer : (C) S

When heated from 0° to 10°C volume of a given mass of water will - (1) Increase gradually (2) Decrease gradually (3) Increase and after will decrease (4) Decrease and after will increase

Description : When heated from 0° to 10°C volume of a given mass of water will - (1) Increase gradually (2) Decrease gradually (3) Increase and after will decrease (4) Decrease and after will increase

Last Answer : (4) Decrease and after will increase

The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Description : The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Last Answer : Answer: Option B

Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Description : Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Last Answer : (D) In front of the eye piece

The theodolites used for making tacheometric observations by optical wedge system, are (A) Provided with stadia hairs in front of eye piece (B) Not provided with stadia hairs at all (C) Fitted with a glass wedge inside the telescope (D) Fitted with a glass wedge in front of telescope

Description : The theodolites used for making tacheometric observations by optical wedge system, are (A) Provided with stadia hairs in front of eye piece (B) Not provided with stadia hairs at all (C) Fitted with a glass wedge inside the telescope (D) Fitted with a glass wedge in front of telescope

Last Answer : (D) Fitted with a glass wedge in front of telescope

Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope(C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Description : Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope (C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Last Answer : (D) All the above

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Description : The real image of an object formed by the objective must lie (A) In the plane of cross hairs (B) At the centre of the telescope (C) At the optical centre of the eye-piece (D) Anywhere inside the telescope

Last Answer : (A) In the plane of cross hairs

A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value B. deflect to zero and remain at that position C. swing to a high reading and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Description : A capacitor is to be tested with a megohmmeter. If the meter is connected to a shorted capacitor, the meter pointer should _____________. A. immediately swing to the maximum resistance value ... and gradually decrease D. swing to zero then gradually increase with slight pointer movements down scale

Last Answer : Answer: B

A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Description : A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A ... this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Last Answer : (B) 1.345

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

The total energy of each particle at various places in the case of perfect incompressible fluid flowing in continuous stream (A) Keeps on increasing (B) Keeps on decreasing (C) Remain constant (D) May increase/decrease

Description : The total energy of each particle at various places in the case of perfect incompressible fluid flowing in continuous stream (A) Keeps on increasing (B) Keeps on decreasing (C) Remain constant (D) May increase/decrease

Last Answer : Answer: Option C

Electrostatic forces in high voltage circuits cause indicating instruments to give ____________. A. parallax readings B. highly intuitive readings C. highly accurate readings D. inaccurate readings

Description : Electrostatic forces in high voltage circuits cause indicating instruments to give ____________. A. parallax readings B. highly intuitive readings C. highly accurate readings D. inaccurate readings

Last Answer : Answer: D

On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Description : On all instruments like measuring cylinder, pipette and burette, readings are always taken at the bottom of the meniscus of liquid. This is not true for liquids like A. Oil B. Ink C. Mercury D. Seawater

Last Answer : Mercury

Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made at end inspiration, to minimize ventilatory artifacts. B. Continuous SvO 2 monitoring based on the technique of reflectance spectrophotometry has been shown to be accurate and reliable. C. Direct measurement of gastric intramucosal pH can be provided by gastrointestinal tonometry. D. Hyperlactatemia may be seen in a number of clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Description : Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made ... clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Last Answer : Answer: BD DISCUSSION: Many different monitoring techniques may be used to assess the adequacy of therapy for shock. The pulmonary artery catheter can provide important hemodynamic and oxygen ... also be seen with liver disease, toxin ingestion, and hypermetabolic states not associated with shock

For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. High End preferred Position is located in the lower left of the circle. d. Performance preferred position is located in the lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Description : For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. ... lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Last Answer : c. High End preferred Position is located in the lower left of the circle.

A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation was begun immediately and continued until arrival in Casualty where an endotracheal tube was inserted and ventilation was maintained on 100% oxygen. Investigations revealed: pH 7.13 PaO2 560 mmHg PaCO2 18 mmHg Bicarbonate 5.8 SaO2 98% Based on these laboratory values, which of the following statements best describes his current pathophysiology? 1) He is demonstrating a primary respiratory alkalosis 2) He probably developed a large right to left intracardiac shunt 3) His anion gap is probably normal 4) His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Description : A 45-year-old solicitor had an onset of severe, crushing, substernal chest pain while attending a football match. He collapsed on his way to the car. Bystander Cardiorespiratory Resuscitation ... His oxyhemoglobin curve is shifted to the left 5) His pulmonary artery pressure is probably elevated

Last Answer : Answers-5 This young patient with severe central chest pain has probably arrested due to myocardial infarction and arrhythmia. His gases reveal high PO2 following 100% O2 but severe acidosis ... no left to right shunting and high pulmonary pressures would be expected after this arrest scenario.

What is the anatomical reason for the left bronchus to be more elevated than the right bronchus? Why in most cases of aspiration of foreign material by children is the object found in the right bronchus?

Description : What is the anatomical reason for the left bronchus to be more elevated than the right bronchus? Why in most cases of aspiration of foreign material by children is the object found in the right bronchus?

Last Answer : The left bronchus is more elevated than the right bronchus because of the position of the heart in the left side of the chest, anterior and inferior to the left bronchus. Accidentally aspired objects are ... . Therefore aspired objects tend to fall in the right side (bronchus) and not in the left.

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

Which one of the following instruments is used to study dispersion of light? (1) Microscope (2) Telescope (3) Spectrometer (4) Photometer

Description : Which one of the following instruments is used to study dispersion of light? (1) Microscope (2) Telescope (3) Spectrometer (4) Photometer

Last Answer : (3) Spectrometer Explanation: Dispersion occurs when different frequencies of light have different phase velocities, due either to material properties (material dispersion) or to the geometry ... portion of the electromagnetic spectrum, typically used in spectroscopic analysis to identify materials.

Which one of the following instruments is used to study dispersion of light ? (1) Microscope (2) Telescope (3) Spectrometer (4) Photometer

Description : Which one of the following instruments is used to study dispersion of light ? (1) Microscope (2) Telescope (3) Spectrometer (4) Photometer

Last Answer : Spectrometer

When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages are 180° apart B. incoming alternator is running too fast C. incoming alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Description : When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages ... alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Last Answer : Answer: C

You are attempting to parallel two AC generators and the synchroscope pointer stops at a position other than 0°. If you close the circuit breaker at this moment _____________. A. the incoming machine will accept all of the load B. the incoming machine will trip out on low voltage release C. a hazardous condition will be created by the cross current between the machines D. a hazardous condition will be created by the incoming machine being at a higher frequency than the bus

Description : You are attempting to parallel two AC generators and the synchroscope pointer stops at a position other than 0°. If you close the circuit breaker at this moment _____________. A. the incoming ... hazardous condition will be created by the incoming machine being at a higher frequency than the bus

Last Answer : Answer: C

You are paralleling two alternators. The synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates that the ____________. A. alternator voltages are 180° apart B. circuit breaker can be closed C. incoming alternator is running too slowly D. synchroscope is defective or broken

Description : You are paralleling two alternators. The synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates that the ____________. A. alternator ... be closed C. incoming alternator is running too slowly D. synchroscope is defective or broken

Last Answer : Answer: B

You are attempting to parallel two AC generators and the synchroscope pointer stops at a position other than 0° prior to closing the circuit breaker. This indicates ___________. A. the frequency of the incoming machine is the same as the bus frequency B. the incoming machine is in phase with the bus, but the frequency is not the same C. the circuit breaker may be closed after breaker has been reset D. there is an existing cross current between generators

Description : You are attempting to parallel two AC generators and the synchroscope pointer stops at a position other than 0° prior to closing the circuit breaker. This indicates ___________. A. the frequency of ... be closed after breaker has been reset D. there is an existing cross current between generators

Last Answer : Answer: A

A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Description : A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Last Answer : Answer: Option C

A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Description : A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Last Answer : a. at the highest position

For taking offsets with an optical square on the right hand side of the chain line, it is held (A) By right hand upside down (B) By left hand upright (C) By right hand upright (D) By left hand upside down

Description : For taking offsets with an optical square on the right hand side of the chain line, it is held (A) By right hand upside down (B) By left hand upright (C) By right hand upright (D) By left hand upside down

Last Answer : (B) By left hand upright

Radio telescopes are better than optical telescopes because - (1) they can detect faint galaxies which no optical telescope can (2) they can work even in cloudy conditions (3) they can work during the day and night (4) All of the above

Description : Radio telescopes are better than optical telescopes because - (1) they can detect faint galaxies which no optical telescope can (2) they can work even in cloudy conditions (3) they can work during the day and night (4) All of the above

Last Answer : (4) All of the above

Radio telescopes are better than optical telescopes because A. they can detect faint galaxies which no optical telescope can B. they can work even in cloudy conditions C. they can work during the day and night D. All of the above

Description : Radio telescopes are better than optical telescopes because A. they can detect faint galaxies which no optical telescope can B. they can work even in cloudy conditions C. they can work during the day and night D. All of the above

Last Answer : D. All of the above

A 50 years-old man presented after a full mouth extraction complaining that he ”bled all night”. Which of the following pre. existing conditions could be responsible for the post operative bleeding: a. Blood pressure reading of 140/80 b. Gastric ulcer. c. Elevated prothrombin time. d. None of the above.

Description : A 50 years-old man presented after a full mouth extraction complaining that he bled all night . Which of the following pre. existing conditions could be responsible for the post operative bleeding: a. Blood ... 140/80 b. Gastric ulcer. c. Elevated prothrombin time. d. None of the above.

Last Answer : c. Elevated prothrombin time.

A 50 years old man presents after a full mouth extraction complaining that he “bled all night”. Which of the following pre existing conditions could be responsible for the post operative bleeding: A. Blood pressure reading of 180/110 B. Gastric ulcer C. Elevated prothrombin time D. A & C are correct E. None of the above

Description : A 50 years old man presents after a full mouth extraction complaining that he bled all night . Which of the following pre existing conditions could be responsible for the post operative bleeding: A. Blood ... ulcer C. Elevated prothrombin time D. A & C are correct E. None of the above

Last Answer : D. A & C are correct

For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (A) 50 mm (B) 75 mm (C) 100 mm (D) 120 mm

Description : For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (A) 50 mm (B) 75 mm (C) 100 mm (D) 120 mm

Last Answer : (B) 75 mm

In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed as a cantilever The correct answer is (A) (i) and (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Description : In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed ... (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option A

For a continuous slab of 3 m x 35 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (a) 120 mm (b) 100 mm (c) 75 mm (d) 50 mm

Description : For a continuous slab of 3 m x 35 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (a) 120 mm (b) 100 mm (c) 75 mm (d) 50 mm

Last Answer : (a) 120 mm

Psychic Readings: What To Expect For Your First Reading?

Description : Psychic Readings: What To Expect For Your First Reading?

Last Answer : There is much controversy over whether psychics legitimatelyhave a sixth sense or whether they are just great actors. Whilemany people are curious about psychics, few people have ... ordistant readings. Most people are probably most familiar with palmreadings, astrology readings, horosco

A spring balance A and a beam balance B are used to weigh an object at different points on Earth. It will be observed that (a) The readings of A and B will be different at different points of the Earth. (b) The readings of A will be the same but the readings of B will be different at different places. (c) Both A and B will have the same reading at all points on the Earth. (d) The readings of A will be different but those of B will be the same at different points on the Earth.

Description : A spring balance A and a beam balance B are used to weigh an object at different points on Earth. It will be observed that (a) The readings of A and B will be different at different points of the ... readings of A will be different but those of B will be the same at different points on the Earth.

Last Answer : Ans:(d)

If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Description : If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Last Answer : Answer: A