Accuracy of 'fix' by two point problem, is (A) Bad (B) Good (C) Not reliable (D) Unique

Accuracy of 'fix' by two point problem, is 

(A) Bad 

(B) Good 

(C) Not reliable 

(D) Unique

by

1 Answer

Answer :

(C) Not reliable 

by

Related questions

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

Is the Spirit Level reliable when it comes ot accuracy?

Description : Is the Spirit Level reliable when it comes ot accuracy?

Last Answer : Yes, providing it hasn’t been abused.

Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Description : Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Last Answer : (C) Given points are inaccessible

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

A computer can solve more than one kind of problem. This is related to which of the following characteristics? A) Accuracy B) Reliability C) Versatility D) Automatic

Description : A computer can solve more than one kind of problem. This is related to which of the following characteristics? A) Accuracy B) Reliability C) Versatility D) Automatic

Last Answer : Answer : C

If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by (A) Taking short legs (B) Making repeated observations of angular and linear measurements (C) Making a subsidiary traverse to determine the length of a long leg (D) All the above

Description : If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs,  the accuracy of the traverse may be improved by  (A) Taking short legs  (B) Making ... (C) Making a subsidiary traverse to determine the length of a long leg  (D) All the above 

Last Answer : (C) Making a subsidiary traverse to determine the length of a long leg 

In chain surveying tie lines are primarily provided (A) To check the accuracy of the survey (B) To take offsets for detail survey(C) To avoid long offsets from chain lines (D) To increase the number of chain lines

Description : In chain surveying tie lines are primarily provided  (A) To check the accuracy of the survey  (B) To take offsets for detail survey  (C) To avoid long offsets from chain lines  (D) To increase the number of chain lines 

Last Answer : (C) To avoid long offsets from chain lines 

You have to observe an included angle with better accuracy than what is achievable by a vernier, you will prefer the method of (A) Repetition (B) Reiteration (C) Double observations (D) Exactness

Description : You have to observe an included angle with better accuracy than what is achievable by a vernier,  you will prefer the method of  (A) Repetition  (B) Reiteration  (C) Double observations  (D) Exactness

Last Answer : (A) Repetition 

The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Description : Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Last Answer : (C) Direct taping

The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Description : The distance between steps for measuring downhill to obtain better accuracy (A) Decreases with decrease of slope (B) Increases with increase of slope (C) Decreases with increase of slope (D) Decreases with decrease of weight of the chain

Last Answer : (C) Decreases with increase of slope

The limiting length of an offset does not depend upon (A) Accuracy of the work (B) Method of setting out perpendiculars (C) Scale of plotting (D) Indefinite features to be surveyed

Description : The limiting length of an offset does not depend upon (A) Accuracy of the work (B) Method of setting out perpendiculars (C) Scale of plotting (D) Indefinite features to be surveyed

Last Answer : (D) Indefinite features to be surveyed

Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Description : Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Last Answer : (A) ½ of the contour interval

Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate than linear measurements (C) Linear measurements are more accurate than angular measurements (D) All of the above

Description : Transit rule of adjusting the consecutive coordinates of a traverse is used where (A) Linear and angular measurements of the traverse are of equal accuracy (B) Angular measurements are more accurate ... (C) Linear measurements are more accurate than angular measurements (D) All of the above

Last Answer : (B) Angular measurements are more accurate than linear measurements

In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Description : In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Last Answer : (B) Curvature of the earth surface is taken into account

Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Description : Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Last Answer : (C) To indicate the accuracy of the survey work

Which one of the following residual biases involves the GPS accuracy? (A) Satellite dependent biases due to uncertainty in the orbital parameters of the satellite (B) Receiver-dependent biases due to clock stability with line (C) Signal propagation biases due to the sphere and troposphere propagation (D) All the above

Description : Which one of the following residual biases involves the GPS accuracy? (A) Satellite dependent biases due to uncertainty in the orbital parameters of the satellite (B) Receiver-dependent biases due to ... (C) Signal propagation biases due to the sphere and troposphere propagation (D) All the above

Last Answer : Answer: Option D

The 'fix' of a plane table station with three known points, is bad if the plane table station lies (A) In the great triangle (B) Outside the great triangle (C) On the circumference of the circumscribing circle (D) None of these

Description : The 'fix' of a plane table station with three known points, is bad if the plane table station lies  (A) In the great triangle  (B) Outside the great triangle  (C) On the circumference of the circumscribing circle  (D) None of these 

Last Answer : (C) On the circumference of the circumscribing circle 

The accuracy of the floating-point numbers representable in two 16-bit words of a computer is approximately A) 16 digits B) 6 digits C) 9 digits D) All of above

Description : The accuracy of the floating-point numbers representable in two 16-bit words of a computer is approximately A) 16 digits B) 6 digits C) 9 digits D) All of above

Last Answer : Answer : A

The accuracy of the floating-point numbers representable in two 16-bit words of a computer is approximately a. 16 digits b. 6 digits c. 9 digits d. All of above

Description : The accuracy of the floating-point numbers representable in two 16-bit words of a computer is approximately a. 16 digits b. 6 digits c. 9 digits d. All of above

Last Answer : d. All of above

Tell me about a problem that you’ve solved in a unique or unusual way. What was the outcome? Were you happy or satisfied with it?

Description : Tell me about a problem that you’ve solved in a unique or unusual way. What was the outcome? Were you happy or satisfied with it?

Last Answer : In this question the interviewer is basically looking for a real life example of how you used creativity to solve a problem.

Beauticians find it difficult to market their product because the customer must be involved in the production of the product (i.e., the facial). This problem illustrates which one of the following unique features of services? A)Intangibility B)Inseparability C)Perishabilit y D)Heterogeneity

Description : Beauticians find it difficult to market their product because the customer must be involved in the production of the product (i.e., the facial). This problem illustrates which one of the following unique features of services? A)Intangibility B)Inseparability C)Perishability D)Heterogeneity

Last Answer : B)Inseparability

The owner of the Beauty Spot beauty salon has difficulty in standardising and controlling the quality of service the customers in her salon receive. This problem illustrates which one of the following unique features of services? A)Intangibility B)Inseparability C)Perishability D)Heterogeneity

Description : The owner of the Beauty Spot beauty salon has difficulty in standardising and controlling the quality of service the customers in her salon receive. This problem illustrates which one of the following unique features of services? A)Intangibility B)Inseparability C)Perishability D)Heterogeneity

Last Answer : D)Heterogeneity

Marketers for the airline industry sometimes find it difficult to promote their product because unused aeroplane seats cannot be stored. This problem illustrates which one of the following unique features of services? A)Intangibility B)Inseparability C)Perishability D)Heterogeneity

Description : Marketers for the airline industry sometimes find it difficult to promote their product because unused aeroplane seats cannot be stored. This problem illustrates which one of the following unique features of services? A)Intangibility B)Inseparability C)Perishability D)Heterogeneity

Last Answer : C)Perishability

Julie is going on an extended trip for three weeks. She lives in a remote area where there are frequent electrical power outages which can last up to three or four days. Julie has quite a bit of food in her freezer which would go bad if it thawed and then re-froze. She does have digital clock and a VCR which would flash 12:00 if the power went out. Unfortunately the clock and VCR flash even if the power only goes out for a few seconds. What can Julie do so that when she returns home she will be able to determine whether the power was out long enough to thaw her food? Asking a neighbor whether the power was out, isn't a reliable option because the nearest house is half a mile away, and one house may have power, while another house may have no power. She won?t be able to have a neighbor chec

Description : Julie is going on an extended trip for three weeks. She lives in a remote area where there are frequent electrical power outages which can last up to three or four days. Julie has quite a bit of food ... power, while another house may have no power. She won?t be able to have a neighbor chec -Riddles

Last Answer : One thing Julie could do is freeze a tray of ice-cubes, and turn the tray of ice upside down in her freezer. When she comes home, she should check the tray. If the ice cubes are still in the ... clean out the freezer. She will have to make a judgment call if the ice-cubes are only slightly thawed.

People in the marketing department are having difficulty estimating the level of effort needed to achieve advertising goals. This problem is characteristic of the __________ approach to advertising appropriation. A)reliable -appropriation B)match -competition C)arbitrary D)objective -and -task E)percent -of-sales

Description : People in the marketing department are having difficulty estimating the level of effort needed to achieve advertising goals. This problem is characteristic of the __________ approach to advertising appropriation. A) ... B)match -competition C)arbitrary D)objective -and -task E)percent -of-sales

Last Answer : D)objective -and -task

Shear strength of a soil is a unique function of (A) Effective stress only (B) Total stress only (C) Both effective stress and total stress (D) None of the above

Description : Shear strength of a soil is a unique function of (A) Effective stress only (B) Total stress only (C) Both effective stress and total stress (D) None of the above

Last Answer : Answer: Option A

Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Description : Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Last Answer : [ B ] Lower bound solution

The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Description : The most reliable method of plotting a theodolite traverse, is (A) By consecutive co-ordinates of each station (B) By independent co-ordinates of each station (C) By plotting included angles and scaling off each traverse leg (D) By the tangent method of plotting

Last Answer : (B) By independent co-ordinates of each station

For predicting floods of a given frequency, the best reliable method is (A) Unit hydrograph method (B) Gumbel's analytical method (C) California method (D) None of these

Description : For predicting floods of a given frequency, the best reliable method is (A) Unit hydrograph method (B) Gumbel's analytical method (C) California method (D) None of these

Last Answer : Answer: Option A

The most reliable estimate is (A) Detailed estimate (B) Preliminary estimate (C) Plinth area estimate (D) Cube rate estimate

Description : The most reliable estimate is (A) Detailed estimate (B) Preliminary estimate (C) Plinth area estimate (D) Cube rate estimate

Last Answer : (A) Detailed estimate

Which of the following statements concerning analog and digital devices are correct? A. The variables in digital systems are fixed quantities, and the variables in analog systems are continuous quantities. B. There are no basic differences between the two systems. C. Analog devices are superior in accuracy compared to digital devices. D. Operations in a digital device are performed simultaneously.

Description : Which of the following statements concerning analog and digital devices are correct? A. The variables in digital systems are fixed quantities, and the variables in analog systems are continuous ... accuracy compared to digital devices. D. Operations in a digital device are performed simultaneously.

Last Answer : Answer: A

Auditing is based on the assumption that financial data are verifiable. Data are verifiable when two or more qualified individuals, a. Working together, can prove, beyond doubt, the accuracy of the data. b. Working independently, can prove, beyond reasonable doubt, the truthfulness of the data. c. Working independently, each reach essentially similar conclusions. d. Working together, can agree upon the accuracy of the data

Description : Auditing is based on the assumption that financial data are verifiable. Data are verifiable when two or more qualified individuals, a. Working together, can prove, beyond doubt, the accuracy of ... reach essentially similar conclusions. d. Working together, can agree upon the accuracy of the data

Last Answer : Working independently, each reach essentially similar conclusions

What is a unique way to say "jump straight to the point"?

Description : What is a unique way to say "jump straight to the point"?

Last Answer : I usually grab his face and say ‘FOCUS!’ but then again he’s 3 and a half and a child of mine.

The resource-based perspective suggests that unique firm resources should be the starting point for developing successful strategies a) the business opportunity should be the starting point for developing successful strategiesb) unique firm resources should be the starting point for developing successful strategies.c) both business opportunity and unique firm resources should be the starting point for developing successful strategies.d) neither business opportunity nor unique firm resources should be the starting point for developing successful strategies.

Description : The resource-based perspective suggests that unique firm resources should be the starting point for developing successful strategies a) the business opportunity should be the starting point for ... nor unique firm resources should be the starting point for developing successful strategies.

Last Answer : unique firm resources should be the starting point for developing successful strategies.

What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Description : What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Last Answer : Triple point

Ice skating is possible and practical because of a unique property of water. Is it because: w) The coefficient of kinetic friction of steel on frozen water decreases with decreasing temperature x) Ice readily sublimes y) The melting point decreases with increasing pressure z) Ice is a good thermal insulator

Description : Ice skating is possible and practical because of a unique property of water. Is it because: w) The coefficient of kinetic friction of steel on frozen water decreases with decreasing temperature x ... sublimes y) The melting point decreases with increasing pressure z) Ice is a good thermal insulator 

Last Answer : ANSWER: Y -- THE MELTING POINT DECREASES WITH INCREASING PRESSURE 

What is the difference between accuracy and precision?

Description : What is the difference between accuracy and precision?

Last Answer : Accuracy is the closeness of a measurement to the true or accepted value, while precision is the closeness of multiple measurements to each other.

Can a ring sizer have inconsistent accuracy?

Description : Can a ring sizer have inconsistent accuracy?

Last Answer : Well, a physical measure can be built incorrectly. I have at least on measuring cup which is incorrectly marked. It could also be used incorrectly. Otherwise, you might consider what you’re comparing it against.

Skateboarders: How long did it take you to ollie up a curb with 99% accuracy?

Description : Skateboarders: How long did it take you to ollie up a curb with 99% accuracy?

Last Answer : answer:I know it took me less time. That isn't to say I was a better skater. But let's hear it for doing anything with curbs. Sure, I did my share of skating ramps but to ... inventiveness of skating things that weren't designed for the purpose of skateboarding was a higher version of skating art.

What GPS mapping units have submeter accuracy?

Description : What GPS mapping units have submeter accuracy?

Last Answer : This GPS Forum may be a better place to post this submeter GPS question @coelacanth.

If one cannot afford an Apple monitor what is the next best one for absolute color to print accuracy?

Description : If one cannot afford an Apple monitor what is the next best one for absolute color to print accuracy?

Last Answer : I've recently began to tackle color management after avoiding it for years and wasting a lot of ink unnecessarily. X-rite i1 makes it really simple. A color expert I met recommended either NEC or ... brilliant, they don't allow for adjustments to the RGB gain so cannot be calibrated as precisely.

Will the changes to the earth caused by the earthquake affect GPS accuracy?

Description : Will the changes to the earth caused by the earthquake affect GPS accuracy?

Last Answer : Didn’t have the answer off the top of my head, but being a good librarian here you go.

To what level and accuracy can scientists predict earthquakes?

Description : To what level and accuracy can scientists predict earthquakes?

Last Answer : As far as I can tell 0%

What do you think about the accuracy of this color personality test?

Description : What do you think about the accuracy of this color personality test?

Last Answer : answer:Nooo, it was the wrong test! This is the one that I meant, I’m sorry guys. http://colorgenicstest.com/color-personality-tests.html Just put in a fake email – I put in some random one @mailinator,.com like [email protected] and it just does it for you.

What is the largest number in observable reality we know of with very high accuracy?

Description : What is the largest number in observable reality we know of with very high accuracy?

Last Answer : Grains of sand in a large bucket?

Should Plaxico Burress be fired? Not because of his illegal act but because sports is supposed to be about coordination and accuracy?

Description : Should Plaxico Burress be fired? Not because of his illegal act but because sports is supposed to be about coordination and accuracy?

Last Answer : You never made a stupid mistake or acted like a klutz? One instance shouldn’t get the guy essentially blackballed from football. If that were the case, every player who fumbled would be gone. So would every player who missed a stair.

Why does rifling improve the accuracy of a spherical bullet?

Description : Why does rifling improve the accuracy of a spherical bullet?

Last Answer : As I recall and I could be wrong but the spin allowed for a more predictable flight path… in kinda the same way a pitch is manipulated… or not… by a pitcher in baseball. Dictating the spin sorta dictates the eventual flight path…

Accuracy in computer terms.

Description : Accuracy in computer terms.

Last Answer : errrm…..client/server

A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Description : A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Last Answer : a.Automated storage and retrieval system (AS/RS)