Corrosion of well pipes may not be reduced by (A) Reducing the draw down and the pumping rate (B) Reducing the flow velocity (C) Using thicker pipes (D) Using screens having larger area of openings

Corrosion of well pipes may not be reduced by 

(A) Reducing the draw down and the pumping rate 

(B) Reducing the flow velocity 

(C) Using thicker pipes 

(D) Using screens having larger area of openings 

by

1 Answer

Answer :

(D) Using screens having larger area of openings 

by

Related questions

Pick up the correct statement from the following: (A) Deposition of calcium carbonate on the inside of the well pipe, causes incrustation of the pipe (B) Incrustation of the pipe reduces the discharge (C) Acidic waters cause corrosion of the pipes (D) All the above

Description : Pick up the correct statement from the following:  (A) Deposition of calcium carbonate on the inside of the well pipe, causes incrustation of the  pipe  (B) Incrustation of the pipe reduces the discharge  (C) Acidic waters cause corrosion of the pipes  (D) All the above 

Last Answer : (D) All the above 

Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Description : Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Last Answer : (D) None of these

Corrosion rate cannot be lowered by reducing the __________ of the corroding medium. (A) Concentration (B) Velocity (C) Temperature (D) None of these

Description : Corrosion rate cannot be lowered by reducing the __________ of the corroding medium. (A) Concentration (B) Velocity (C) Temperature (D) None of these

Last Answer : (A) Concentration

Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Description : Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Last Answer : (D) 200 mesh screen has 200 openings per linear cm

Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self cleansing velocity C. The sewers may be carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Description : Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self ... carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Last Answer : ANS: A

Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Description : Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Last Answer : (D) All the above

S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For discharge Q and coefficient of transmissibility T, the relationship, is (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1) (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) (C) S2 - S1 = (2.3Q/4 ) loge (t2/t1) (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Description : S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For  discharge Q and coefficient of transmissibility T, the relationship, is  (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1)  (B) S2 - S1 ... - S1 = (2.3Q/4 ) loge (t2/t1)  (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Last Answer : (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) 

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Head loss in smaller size pipes at equal velocities, is less (B) Cost of pumping is less in smaller size pipes (C) Cost of smaller pipes is comparatively more (D) None of these

Description : Pick up the correct statement from the following:  (A) Head loss in smaller size pipes at equal velocities, is less  (B) Cost of pumping is less in smaller size pipes  (C) Cost of smaller pipes is comparatively more  (D) None of these 

Last Answer : (D) None of these 

A centrifugal pump designed for handling water (μ = 1 cp) will deliver __________ when pumping a thicker oil (μ = 30 cp). (A) Less head & capacity (B) More head (C) More capacity (D) Less head & more capacity

Description : A centrifugal pump designed for handling water (μ = 1 cp) will deliver __________ when pumping a thicker oil (μ = 30 cp). (A) Less head & capacity (B) More head (C) More capacity (D) Less head & more capacity

Last Answer : (A) Less head & capacity

Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Description : Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

While determining the yield of open wells by the pumping test (A) Velocity of recharging water, increases with depression head (B) Depression head resulting at critical velocity, is called critical depression head (C) Working head is generally limited to (D) Maximum safe yield of an open well, is expected at critical depression head

Description : While determining the yield of open wells by the pumping test  (A) Velocity of recharging water, increases with depression head  (B) Depression head resulting at critical velocity, is called critical ... (D) Maximum safe yield of an open well, is expected at critical depression head 

Last Answer : (D) Maximum safe yield of an open well, is expected at critical depression head 

For the same draw down in two observations wells at distances r1 and r2, the times after start of pumping are t1 and t2 hours respectively. The relation which holds good is (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3 × t1 (D) t2 = (r2/r1) × t1 2

Description : For the same draw down in two observations wells at distances r1 and r2, the times after start of  pumping are t1 and t2 hours respectively. The relation which holds good is  (A) t2 = r2/r1 × t1 (B) t2 = (r2/r1)² × t1 (C) t2 = (r2/r1)3  × t1 (D) t2 = (r2/r1) × t1 2

Last Answer : (B) t2 = (r2/r1)² × t1

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

Asbestos pipes are (A) Light in weight and easy to transport (B) Highly resistant to corrosion (C) High flexible to accommodate deflection upto 12° (D) All the above

Description : Asbestos pipes are (A) Light in weight and easy to transport (B) Highly resistant to corrosion (C) High flexible to accommodate deflection upto 12° (D) All the above

Last Answer : (D) All the above

The main disadvantage of hard water, is (A) Greater soap consumption (B) Scaling of boilers (C) Corrosion and incrustation of pipes (D) All the above

Description : The main disadvantage of hard water, is  (A) Greater soap consumption  (B) Scaling of boilers  (C) Corrosion and incrustation of pipes  (D) All the above 

Last Answer : (D) All the above 

A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of head and discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Description : A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of ... discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Last Answer : Answer: Option C

When the reduced level of the water source is higher than the reduced level of the consumer's place, water is generally supplied (A) By pumping system (B) By gravitational system (C) Both (a) and (b) (D) All the above

Description : When the reduced level of the water source is higher than the reduced level of the consumer's  place, water is generally supplied  (A) By pumping system  (B) By gravitational system  (C) Both (a) and (b)  (D) All the above 

Last Answer : (B) By gravitational system 

Specific yield of a well is (A) Quantity of water than can be drawn from the well (B) Flow of water per unit time (C) Total quantity of water available in the well (D) Quantity of water per unit time per unit draw-down

Description : Specific yield of a well is (A) Quantity of water than can be drawn from the well (B) Flow of water per unit time (C) Total quantity of water available in the well (D) Quantity of water per unit time per unit draw-down

Last Answer : (C) Total quantity of water available in the well

A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Description : A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Last Answer : Answer: Option D

How will you increase the gain of an antenna? A. By adding several antennas in parallel B. By focusing the radiated energy in one desired direction C. By making antenna rods thicker D. By making the antenna size larger

Description : How will you increase the gain of an antenna? A. By adding several antennas in parallel B. By focusing the radiated energy in one desired direction C. By making antenna rods thicker D. By making the antenna size larger

Last Answer : B. By focusing the radiated energy in one desired direction

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Consider the following statements: Mitra’s hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate of change of velocity per unit length of transition is constant throughout the length of the transition. Which of these statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes(A) Fading of dyes on textiles(B) Corrosion, tarnishing & soiling of metals(C) Reduced strength of textiles(D) All (A), (B) and (C)

Description : Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes (A) Fading of dyes on textiles (B) Corrosion, tarnishing & soiling of metals (C) Reduced strength of textiles (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Carpet area does not include the area of (A) The walls along with doors and other openings (B) Bath room and lavatory (C) Kitchen and pantry (D) All the above

Description : Carpet area does not include the area of (A) The walls along with doors and other openings (B) Bath room and lavatory (C) Kitchen and pantry (D) All the above

Last Answer : (D) All the above

Reciprocating pumps (A) Are not suitable for variable heads (B) Are four times costlier than centrifugal pumps (C) Are not suitable for pumping water containing sediments (D) Single stroke produce pulsating flow

Description : Reciprocating pumps  (A) Are not suitable for variable heads  (B) Are four times costlier than centrifugal pumps  (C) Are not suitable for pumping water containing sediments  (D) Single stroke produce pulsating flow 

Last Answer : (A) Are not suitable for variable heads 

The water level in an open well was depressed by pumping 2.5 m and recuperated 2.87 m in 3 hours and 50 minutes. The yield of the well per minute is (A) 0.0033 (B) 0.0044 (C) 0.0055 (D) 0.0066

Description : The water level in an open well was depressed by pumping 2.5 m and recuperated 2.87 m in 3  hours and 50 minutes. The yield of the well per minute is  (A) 0.0033  (B) 0.0044  (C) 0.0055  (D) 0.0066 

Last Answer : (C) 0.0055 

Pick up the correct statement from the following: (A) The water level in a still well, represents the ground water table level (B) The difference between water table level and the water level in a well after pumping, is called depression head (C) The surface of water table surrounding a well during pumping, forms a cone of depression (D) All the above

Description : Pick up the correct statement from the following:  (A) The water level in a still well, represents the ground water table level  (B) The difference between water table level and the water ... water table surrounding a well during pumping, forms a cone of depression  (D) All the above 

Last Answer : (D) All the above 

A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is lowered by 1.0 m. The transmissibility of the aquifer, is (A) 1.185 m2 /minute(B) 1.285 m2/minute (C) 1.385 m2/minute (D) 1.485 m2/minute

Description : A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is ... 1.185 m2 /minute (B) 1.285 m2 /minute (C) 1.385 m2 /minute (D) 1.485 m2 /minute

Last Answer : Answer: Option C

In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as: A. Electroplating B. Annealing C. Galvanization D. Vulcanization

Description : In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as: A. Electroplating B. Annealing C. Galvanization D. Vulcanization

Last Answer : ANSWER: C

In order to prevent the corrosion of iron pipes, they are often coated with a layer of zinc. This process is termed as (a) electroplating (b) annealing (c) galvanization (d) vulcanization

Description : In order to prevent the corrosion of iron pipes, they are often coated with a layer of zinc. This process is termed as (a) electroplating (b) annealing (c) galvanization (d) vulcanization

Last Answer : Ans:(c)

The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called – (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Description : The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called – (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Last Answer : (4) Galvanization Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting.

Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes

Description : Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes

Last Answer : ANS: D

In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as------? A. Electroplating B. Annealing C. Galvanization (Answer) D. Vulcanization

Description : In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as------? A. Electroplating B. Annealing C. Galvanization (Answer) D. Vulcanization

Last Answer : C. Galvanization (Answer)

The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called : (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Description : The process of covering water pipes made of Iron with Zinc layer to prevent corrosion is called : (1) Zinc plating (2) Alloy formation (3) Vulcanization (4) Galvanization

Last Answer : Galvanization

Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian fluid velocity in a circular pipe flow is maximum at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Description : During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as (A) It is very corrosive at elevated temperature (B) Its viscosity is not reduced on ... be further reduced) (C) It decomposes on further increasing the temperature (D) None of these

Last Answer : (B) Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced)

Beta adrenergic blockers lower intraocular tension by: A. Down regulating adenylyl cyclase in ciliary body through reduced activation of β2 adrenoceptors B. Constricting ciliary blood vessels C. Blocking adrenergic action on trabecular meshwork D. Reducing aqueous formation unrelated to beta adrenoceptor mediation

Description : Beta adrenergic blockers lower intraocular tension by: A. Down regulating adenylyl cyclase in ciliary body through reduced activation of β2 adrenoceptors B. Constricting ciliary blood vessels ... action on trabecular meshwork D. Reducing aqueous formation unrelated to beta adrenoceptor mediation

Last Answer : A. Down regulating adenylyl cyclase in ciliary body through reduced activation of β2 adrenoceptors

Beta adrenergic blockers lower intraocular tension by: A. Down regulating adenylyl cyclase in ciliary body through reduced activation of β2 adrenoceptors B. Constricting ciliary blood vessels C. Blocking adrenergic action on trabecular meshwork D. Reducing aqueous formation unrelated to beta adrenoceptor mediation

Description : Beta adrenergic blockers lower intraocular tension by: A. Down regulating adenylyl cyclase in ciliary body through reduced activation of β2 adrenoceptors B. Constricting ciliary blood vessels ... action on trabecular meshwork D. Reducing aqueous formation unrelated to beta adrenoceptor mediation

Last Answer : A. Down regulating adenylyl cyclase in ciliary body through reduced activation of β2 adrenoceptors

When using a pumping loop to mix two miscible fluids in a tank, when can the content are considered well mixed?

Description : When using a pumping loop to mix two miscible fluids in a tank, when can the content are considered well mixed?

Last Answer : A rule of thumb is to turn the tank over three (3) times and then sample the tank for mixture properties. By “turn the tank over”, we mean to force the entire volume of the tank through the pump at least three times. More turnovers may be necessary, but three times is a good starting point.

If a beam fails in bond, then its bond strength can be increased most economically by (A) Increasing the depth of beam (B) Using thinner bars but more in number (C) Using thicker bars but less in number (D) Providing vertical stirrups

Description : If a beam fails in bond, then its bond strength can be increased most economically by (A) Increasing the depth of beam (B) Using thinner bars but more in number (C) Using thicker bars but less in number (D) Providing vertical stirrups

Last Answer : Answer: Option B

19. The water hammer in pipes occurs due to sudden change in the velocity of flowing liquid A) Agree B) Disagree

Description : 19. The water hammer in pipes occurs due to sudden change in the velocity of flowing liquid A) Agree B) Disagree

Last Answer : A

Barometer is used to measure (A) Velocity of liquid(B) Atmospheric pressure (C) Pressure in pipes and channels (D) Difference of pressure between two points in a pipe

Description : Barometer is used to measure (A) Velocity of liquid (B) Atmospheric pressure (C) Pressure in pipes and channels (D) Difference of pressure between two points in a pipe

Last Answer : Answer: Option B

The load stress of a section can be reduced by (A) Decreasing the lever arm (B) Increasing the total perimeter of bars (C) Replacing larger bars by greater number of small bars (D) Replacing smaller bars by greater number of greater bars

Description : The load stress of a section can be reduced by (A) Decreasing the lever arm (B) Increasing the total perimeter of bars (C) Replacing larger bars by greater number of small bars (D) Replacing smaller bars by greater number of greater bars

Last Answer : Answer: Option C

What are the major problems in using pumping for concreting works?

Description : What are the major problems in using pumping for concreting works?

Last Answer : In pumping operation, the force exerted by pumps must overcome the friction between concrete and the pumping pipes, the weight of concrete and the pressure head when placing concrete above the ... other hand, a proper selection of aggregate grading helps to improve the pumpability of concrete.

Channelization of streams is designed to reduce flooding by ___________. a) Speeding the passage of floodwaters b) Reducing bank erosion c) Slowing down river velocity so as to reduce damage d) Increase the meandering of streams

Description : Channelization of streams is designed to reduce flooding by ___________. a) Speeding the passage of floodwaters b) Reducing bank erosion c) Slowing down river velocity so as to reduce damage d) Increase the meandering of streams

Last Answer : a) Speeding the passage of floodwaters

Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of 30 m to 60 m along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Description : Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of ... along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Last Answer : ANS: D

The valve commonly used in pipes larger than 2" dia is a (A) Globe valve (B) Plug-cock (C) Gate valve (D) Check valve

Description : The valve commonly used in pipes larger than 2" dia is a (A) Globe valve (B) Plug-cock (C) Gate valve (D) Check valve

Last Answer : (C) Gate valve

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : options A

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : Option C