Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Pick out the wrong statement.
(A) Hammer crushers operate by impact action
(B) Standard screens have circular opening
(C) With increase in mesh number of screens, their diameter in microns
decreases
(D) 200 mesh screen has 200 openings per linear cm
by

1 Answer

Answer :

(D) 200 mesh screen has 200 openings per linear cm
by

Related questions

or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Description : 200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Last Answer : (C) inch

Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for(A) British standard screens(B) German standard screens (DIN 1171) etc(C) American standard screens (ASTM and Tyler standard screens)(D) All (A), (B) and (C)

Description : Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for (A) British ... (C) American standard screens (ASTM and Tyler standard screens) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush one tonne of feed to 200 microns (C) Energy (kWh/ton of feed) needed to crush small feed to such a size that 80% of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Description : The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Last Answer : (A) 0.0074 cm

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Description : 200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Last Answer : (B) 74

Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Last Answer : (B) 0.30

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher(B) Ball mill(C) Roll crusher(D) Gyratory crusher

Description : Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher (B) Ball mill (C) Roll crusher (D) Gyratory crusher

Last Answer : (B) Ball mill

With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Description : With increase in the capacity of screens, the screen effectiveness (A) Remains unchanged (B) Increases (C) Decreases (D) Decreases exponentially

Last Answer : (C) Decreases

As per Taggart's formula, the capacity (kg/hr) of Jaw & Gyratory crushers (for gapes of 10 to 60 cms) is equal to (where, L = Length of feed opening, cms S = Maximum width of discharge opening, cms). (A) LS (B) 93 LS (C) 250 LS (D) √(LS)

Description : As per Taggart's formula, the capacity (kg/hr) of Jaw & Gyratory crushers (for gapes of 10 to 60 cms) is equal to (where, L = Length of feed opening, cms S = Maximum width of discharge opening, cms). (A) LS (B) 93 LS (C) 250 LS (D) √(LS)

Last Answer : (B) 93 LS

Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Description : Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Last Answer : (A) Hammer mills

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

Corrosion of well pipes may not be reduced by (A) Reducing the draw down and the pumping rate (B) Reducing the flow velocity (C) Using thicker pipes (D) Using screens having larger area of openings

Description : Corrosion of well pipes may not be reduced by  (A) Reducing the draw down and the pumping rate  (B) Reducing the flow velocity  (C) Using thicker pipes  (D) Using screens having larger area of openings 

Last Answer : (D) Using screens having larger area of openings 

Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Description : Pick up the incorrect statement from the following: (A) No deduction is made for the volume occupied by reinforcement (B) No deduction is made for the openings upto 0.1 sq.m (C) No deduction is made for volumes occupied by pipes, not exceeding 100 sq.cm in crosssection (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size (C) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Description : Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed ... ) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Last Answer : (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size

Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a revolving screen used in flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Description : Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a ... flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C

Reduction ratio of crushers is the (A) Ratio of feed opening to discharge opening (B) Ratio of discharge opening to feed opening (C) Determining factor for minimum dia of the feed and the product (D) None of these

Description : Reduction ratio of crushers is the (A) Ratio of feed opening to discharge opening (B) Ratio of discharge opening to feed opening (C) Determining factor for minimum dia of the feed and the product (D) None of these

Last Answer : (A) Ratio of feed opening to discharge opening

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the screening of the (A) Light metal powder down upto 4 mesh size (B) Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Description : Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the ... Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Last Answer : (C) Heavy tonnages of rocks or gravel

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Mesh indicates the number of holes per (A) Square inch (B) Linear inch (C) Square foot (D) Linear foot

Description : Mesh indicates the number of holes per (A) Square inch (B) Linear inch (C) Square foot (D) Linear foot

Last Answer : (B) Linear inch

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) Same as that of A (B) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Description : A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) ... ) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Last Answer : (B) One fourth as that of A

Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Last Answer : A) 2 to 3

A sand mixture was screened through a standard 10-mesh screen. The mass fraction of the oversize material in feed, overflow and underflow were found to be 0.38, 0.79 and 0.22 respectively. The screen effectiveness based on the oversize is (A) 0.50 (B) 0.58 (C) 0.68 (D) 0.62

Description : A sand mixture was screened through a standard 10-mesh screen. The mass fraction of the oversize material in feed, overflow and underflow were found to be 0.38, 0.79 and 0.22 respectively. The screen effectiveness based on the oversize is (A) 0.50 (B) 0.58 (C) 0.68 (D) 0.62

Last Answer : (A) 0.50

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

Pick out the wrong statement. (A) In a static mass of liquid, the pressure at a point is the same for all liquids (B) Pressure decreases exponentially with elevation in an isothermal atmosphere(C) Atmospheric pressure = absolute pressure ‒ gage pressure(D) As per Pascal's law, the pressure at a point in a static or uniformlymoving fluid is equal in all directions

Description : Pick out the wrong statement. (A) In a static mass of liquid, the pressure at a point is the same for all liquids (B) Pressure decreases exponentially with elevation in an isothermal atmosphere (C) ... s law, the pressure at a point in a static or uniformly moving fluid is equal in all directions

Last Answer : (A) In a static mass of liquid, the pressure at a point is the same for all liquids

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to the decrease in electron movement (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase

Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Description : Trommels are revolving screens which normally operate in the range of __________ rpm. (A) 1 - 2 (B) 15 - 20 (C) 40 - 50 (D) 60 - 75

Last Answer : (B) 15 - 20

This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Axial flow

Ultrafine grinders operate principally by (A) Slow compression (B) Impact (C) Attrition (D) Cutting action

Description : Ultrafine grinders operate principally by (A) Slow compression (B) Impact (C) Attrition (D) Cutting action

Last Answer : (C) Attrition

Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Description : Gyratory crushers compared to the reciprocating jaw crushers (A) Have greater capacity per unit of discharge area (B) Crush intermittently (C) Are less suitable for coarse materials (D) Have less steady power consumption

Last Answer : (A) Have greater capacity per unit of discharge area

Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of 30 m to 60 m along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Description : Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of ... along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Last Answer : ANS: D

Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Description : Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Last Answer : Answer: Option B

The ratio of the area of openings in one screen (Taylor series) to that of the openings in the next smaller screen is (A) 1.5 (B) 1 (C) √2 (D) None of these

Description : The ratio of the area of openings in one screen (Taylor series) to that of the openings in the next smaller screen is (A) 1.5 (B) 1 (C) √2 (D) None of these

Last Answer : (D) None of these

Screen capacity is not a function of (A) Its openings size (B) Screening mechanism (C) Screening surface (D) Atmospheric humidity

Description : Screen capacity is not a function of (A) Its openings size (B) Screening mechanism (C) Screening surface (D) Atmospheric humidity

Last Answer : (D) Atmospheric humidity

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian fluid velocity in a circular pipe flow is maximum at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5