If average volume of sediment deposits is one-tenth million cubic metres per year in a reservoir of total capacity 10 million cubic metres, the dead storage will be filled up, in (A) 10 years (B) 15 years (C) 20 years (D) 25 years

If average volume of sediment deposits is one-tenth million cubic metres per year in a reservoir of
total capacity 10 million cubic metres, the dead storage will be filled up, in
(A) 10 years
(B) 15 years
(C) 20 years
(D) 25 years
by

1 Answer

Answer :

(D) 25 years
by

Related questions

In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The reservoir will theoretically be silted in 240 years (B) The reservoir will start reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The ... reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

Pick up the correct statement from the following: (A) Large solids carried along the river bed, is known as bed load (B) The fine sediment deposits are generally near the face of the dam (C) Deposition of sediment in the reservoir, reduces the capacity of the reservoir (D) All the above

Description : Pick up the correct statement from the following:  (A) Large solids carried along the river bed, is known as bed load  (B) The fine sediment deposits are generally near the face of ... ) Deposition of sediment in the reservoir, reduces the capacity of the reservoir  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in the river, is called trap efficiency (B) Small capacity reservoirs on large rivers generally, silt less (C) Large capacity reservoirs on small rivers generally silt more (D) All the above

Description : Pick up the correct statement from the following:  (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in  the river, is called trap efficiency  ( ... less  (C) Large capacity reservoirs on small rivers generally silt more  (D) All the above

Last Answer : (D) All the above

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity

Dead storage of a reservoir of Q capacity generally provided for silt deposition during its life time, is generally kept (A) 1/8th Q (B) 1/6th Q (C) 1/5th Q (D) 1/4th Q

Description : Dead storage of a reservoir of Q capacity generally provided for silt deposition during its life time, is generally kept (A) 1/8th Q (B) 1/6th Q (C) 1/5th Q (D) 1/4th Q

Last Answer : (D) 1/4th Q

The storage capacity of a reservoir may be divided into three zones. The lowest zone is (A) Dead storage (B) Useful storage(C) Surcharge storage (D) None of these

Description : The storage capacity of a reservoir may be divided into three zones. The lowest zone is (A) Dead storage (B) Useful storage  (C) Surcharge storage  (D) None of these

Last Answer : (A) Dead storage

People living at sea level have around 5 million RBC per cubic millimeter of their blood whereas those living at an altitude to 5400 metres have around 8 million. This is because at high altitude (a) people eat more nutritive food, therefore more RBCs are formed (b) people get pollution-free air to breath and more oxygen is available (c) atmospheric O2 level is less and hence more RBCs are needed to absorb the required amount of O2 to survive (d) there is more UV radiation which enhances RBC production.

Description : People living at sea level have around 5 million RBC per cubic millimeter of their blood whereas those living at an altitude to 5400 metres have around 8 million. This is because at high altitude ... required amount of O2 to survive (d) there is more UV radiation which enhances RBC production.

Last Answer : (c) atmospheric O2 level is less and hence more RBCs are needed to absorb the required amount of O2 to survive

If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Description : If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : Answer: Option D

The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The  expected pressure due to water hammer is 7.5 kg/cm2  in a pressure conduit of diameter 1 m.  Assuming the efficiency of the ... , is  (A) 10 mm  (B) 15 mm  (C) 20 mm  (D) 25 mm 

Last Answer : (C) 20 mm

Four pipes can fill a reservoir in 15, 20, 30 and 60 hours respectively. The first one was opened at 6 AM, second at 7 AM, thir da t 8 AM and the fourth at 9 AM. When will the reservoir be filled ? (A) 11 AM (B) 12 Noon (C) 1 PM (D) 1:30 PM

Description : Four pipes can fill a reservoir in 15, 20, 30 and 60 hours respectively. The first one was opened at 6 AM, second at 7 AM, thir da t 8 AM and the fourth at 9 AM. When will the reservoir be filled ? (A) 11 AM (B) 12 Noon (C) 1 PM (D) 1:30 PM

Last Answer : Answer: C

If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Description : If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Last Answer : (C) D = 0.97 to 1.22 Q

Runoff is measured in (A) Cubic metres (B) Cubic metres per sec. (C) Cubic metres per minute (D) Cubic metres per hour

Description : Runoff is measured in (A) Cubic metres (B) Cubic metres per sec. (C) Cubic metres per minute (D) Cubic metres per hour

Last Answer : Answer: Option B

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

The order of existence of three portions of water in a reservoir from the bottom to top is (A) Useful storage + surcharge storage + dead storage (B) Useful storage + dead storage + surcharge storage (C) Dead storage + useful storage + surcharge storage (D) Surcharge storage + useful storage + dead storage

Description : The order of existence of three portions of water in a reservoir from the bottom to top is (A) Useful storage + surcharge storage + dead storage (B) Useful storage + dead storage + ... Dead storage + useful storage + surcharge storage (D) Surcharge storage + useful storage + dead storage

Last Answer : (C) Dead storage + useful storage + surcharge storage

Surcharge storage zone of a reservoir, is (A) Below dead storage (B) Between dead storage and useful storage (C) Above useful storage (D) Also known as valley storage

Description : Surcharge storage zone of a reservoir, is  (A) Below dead storage  (B) Between dead storage and useful storage  (C) Above useful storage  (D) Also known as valley storage 

Last Answer : (C) Above useful storage 

High pH value of water does not produce (A) Incrustation (B) Sediment deposits (C) Tuberculation (D) None of these

Description : High pH value of water does not produce (A) Incrustation (B) Sediment deposits (C) Tuberculation (D) None of these

Last Answer : (C) Tuberculation

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

What is the volume of a box that measures 1 yard by 2 feet by 1.5 feet in cubic feet and cubic metres?

Description : What is the volume of a box that measures 1 yard by 2 feet by 1.5 feet in cubic feet and cubic metres?

Last Answer : The volume of the box is 36 * 24 * 18 = 15552 cubic inches. ---------------------------------------------- 1 ft = 1/3 yd â†' volume = 1 yd Ã- 2 ft Ã- 1.5 ft = 1 yd Ã- (2 Ã- 1/3) yd Ã- (1.5 à ... then 1 yd ≈ 36 Ã- 2.5 ÷ 100 m = 0.9 m and volume ≈ 1/3 Ã- (9/10)³ cu m = 243/1000 cu m = 0.243 cu m

The ratio of total capacity and dead storage is kept (A) 8 (B) 6 (C) 4 (D) 3

Description : The ratio of total capacity and dead storage is kept (A) 8 (B) 6 (C) 4 (D) 3

Last Answer : (C) 4

Pick up the correct statement from the following: (A) If ports are closed, the dry intake towers will not have any water (B) Even if ports are closed, the wet intake tower will have water filled up to reservoir level (C) No buoyant force acts on wet intake towers (D) All the above

Description : Pick up the correct statement from the following:  (A) If ports are closed, the dry intake towers will not have any water  (B) Even if ports are closed, the wet intake tower will have water ... to reservoir level  (C) No buoyant force acts on wet intake towers  (D) All the above 

Last Answer : (D) All the above 

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

Degree of a road curve is defined as the angle in degrees subtended at the centre by an arc of (A) 10 metres (B) 20 metres (C) 25 metres (D) 30 metres

Description : Degree of a road curve is defined as the angle in degrees subtended at the centre by an arc of (A) 10 metres (B) 20 metres (C) 25 metres (D) 30 metres

Last Answer : Answer: Option B

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. Flourish in the presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Description : The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. ... presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Last Answer : ANS: D

The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Description : The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Last Answer : Answer: Option C

Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Description : Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Last Answer : Answer: Option C

The best compromise between the increase of the length of a highway and reduction in its load carrying capacity, is the ruling gradient (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 25

Description : The best compromise between the increase of the length of a highway and reduction in its load carrying capacity, is the ruling gradient (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 25

Last Answer : Answer: Option C

A barrier has four inlets A, B, C and D. The barrier can be filled in 24 minutes through the first three inlets and it can be filled in 30 minutes through the second, the third and fourth inlet also it can be filled through the first and the fourth inlet in 40 minutes. How much time required to fill up the barrier by all the four inlets? A) 10 mins B) 15 mins C) 20 mins D) 25 mins E) None of the Above

Description : A barrier has four inlets A, B, C and D. The barrier can be filled in 24 minutes through the first three inlets and it can be filled in 30 minutes through the second, the third and fourth inlet also it can be ... all the four inlets? A) 10 mins B) 15 mins C) 20 mins D) 25 mins E) None of the Above

Last Answer : C (1/A + 1/B + 1/C) = 1/24 …(i) (1/B + 1/C + 1/D) = 1/30 …(ii) (1/A + 1/D) = 1/40…(iii) From eqn (i) and (ii) (1/A – 1/D) = 1/120…(iv) From eqn (iii) and (iv) A=60,D=120. Let the time taken to full the tank = s S(1/A + 1/B +1/C +1/D)= 1 S(1/24+1/120) = 1 S= 20 mins

The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Description : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Last Answer : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of ... dimensions of box for minimum cost of construction.

Profile levelling is usually done for determining (A) Contours of an area (B) Capacity of a reservoir (C) Elevations along a straight line (D) Boundaries of property

Description : Profile levelling is usually done for determining  (A) Contours of an area  (B) Capacity of a reservoir  (C) Elevations along a straight line  (D) Boundaries of property 

Last Answer : (C) Elevations along a straight line 

Hydrology helps in (A) Predicting maximum flows (B) Deciding the minimum reservoir capacity (C) Forecasting the availability of quantity of water at reservoir site (D) All the above

Description : Hydrology helps in (A) Predicting maximum flows (B) Deciding the minimum reservoir capacity (C) Forecasting the availability of quantity of water at reservoir site (D) All the above

Last Answer : Answer: Option D

Consider the following situation in a flow mass curve study when demand line drawn from a ridge in the mass curve does not intersect the mass curve again. This means that : (a) The storage is not adequate (b) The demand cannot be met by the inflow as the reservoir will not refill (c) The reservoir was not full at the beginning (d) The reservoir is wasting water by spill

Description : Consider the following situation in a flow mass curve study when demand line drawn from a ridge in the mass curve does not intersect the mass curve again. This means that : (a) The storage is not ... (c) The reservoir was not full at the beginning (d) The reservoir is wasting water by spill

Last Answer : (b) The demand cannot be met by the inflow as the reservoir will not refill

If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is (A) 0.15 (B) 0.20 (C) 0.28 (D) 0.34

Description : If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is (A) 0.15 (B) 0.20 (C) 0.28 (D) 0.34

Last Answer : (D) 0.34

The total amount of iodine in the body of an average adult is (A) 10–15 mg (B) 20–25 mg (C) 45–50 mg (D) 75–100 mg MINERAL METABOLISM 199

Description : The total amount of iodine in the body of an average adult is (A) 10–15 mg (B) 20–25 mg (C) 45–50 mg (D) 75–100 mg MINERAL METABOLISM 199

Last Answer : Answer : C

What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Description : What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Last Answer : b. $10 million

Two trains of equal lengths take 10 seconds and 15 seconds respectively to cross a telegraph post. If the length of each train be 120 metres, in what time (in seconds) will they cross each other travelling in opposite direction? A.12 sec B.18 sec C.14 sec D.25 sec E.None of these

Description : Two trains of equal lengths take 10 seconds and 15 seconds respectively to cross a telegraph post. If the length of each train be 120 metres, in what time (in seconds) will they cross each other travelling in opposite direction? A.12 sec B.18 sec C.14 sec D.25 sec E.None of these

Last Answer : Answer – A (12 sec) Explanation – Speed of the first train = [120 / 10] m/sec = 12 m/sec. Speed of the second train = [120 / 15] m/sec = 8 m/sec. Relative speed = (12 + 8) = m/sec = 20 m/sec. ∴ Required time = (120 + 120) / 20 secc = 12 sec

In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by the cement paste (C) Volume of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

The population of India is about 1.2 billion. Take the average consumption of energy per person per year in India as 30 Mega Joules. If this consumption is met by carbon based fuels and the rate of carbon emissions per kilojoule is l5 x I0 6 kgs, the total carbon emissions per year from India will be (A) 54 million metric tons (B) 540 million metric tons (C) 5400 million metric tons (D) 2400 million metric tons

Description : The population of India is about 1.2 billion. Take the average consumption of energy per person per year in India as 30 Mega Joules. If this consumption is met by carbon based fuels and the rate of ... tons (B) 540 million metric tons (C) 5400 million metric tons (D) 2400 million metric tons 

Last Answer : (B) 540 million metric tons

A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Description : A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Last Answer : In coned shape containers*

Minimum grade of concrete to be used in reinforced concrete as per IS: 4561978 is (A) M 15 (B) M 20 (C) M 10 (D) M 25

Description : Minimum grade of concrete to be used in reinforced concrete as per IS: 4561978 is (A) M 15 (B) M 20 (C) M 10 (D) M 25

Last Answer : Answer: Option A

While designing a water supply of an industrial township, industrial and commercial water demand of total supply, is assumed (A) 10 % (B) 10 to 15 % (C) 15 to 20 % (D) 20 to 25 %

Description : While designing a water supply of an industrial township, industrial and commercial water  demand of total supply, is assumed  (A) 10 %  (B) 10 to 15 %  (C) 15 to 20 %  (D) 20 to 25 %

Last Answer : (D) 20 to 25 %

For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head of 30 m. The minimum required horse power, is (A) 10 H.P. (B) 15 H.P. (C) 18 H.P. (D) 20 H.P.

Description : For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head  of 30 m. The minimum required horse power, is  (A) 10 H.P.  (B) 15 H.P.  (C) 18 H.P.  (D) 20 H.P. 

Last Answer : (D) 20 H.P. 

Benthic organisms are affected the most by (a) light reaching the forest floor (b) surface turbulence of water (c) sediment characteristics of aquatic ecosystems (d) water-holding capacity of soil

Description : Benthic organisms are affected the most by (a) light reaching the forest floor (b) surface turbulence of water (c) sediment characteristics of aquatic ecosystems (d) water-holding capacity of soil

Last Answer : c) sediment characteristics of aquatic ecosystems

Dams are designed to reduce flooding by ____________. a) Protecting river banks from erosion b) Providing storage for flood water c) Increasing the downstream velocity of flood water ‘ d) Trapping sediment behind the dam so it can't be deposited downstream

Description : Dams are designed to reduce flooding by ____________. a) Protecting river banks from erosion b) Providing storage for flood water c) Increasing the downstream velocity of flood water ‘ d) Trapping sediment behind the dam so it can't be deposited downstream

Last Answer : b) Providing storage for flood water

Dams are designed to reduce flooding by _______________. a) Protecting river banks from erosion b) Providing storage for flood water c) Increasing the downstream velocity of flood water d) Trapping sediment behind the dam so it can't be deposited downstream

Description : Dams are designed to reduce flooding by _______________. a) Protecting river banks from erosion b) Providing storage for flood water c) Increasing the downstream velocity of flood water d) Trapping sediment behind the dam so it can't be deposited downstream

Last Answer : b) Providing storage for flood water

As per IRC recommendations, the average level of illumination on important roads carrying fast traffic is (A) 10 Lux (B) 15 Lux (C) 20 Lux (D) 30 Lux

Description : As per IRC recommendations, the average level of illumination on important roads carrying fast traffic is (A) 10 Lux (B) 15 Lux (C) 20 Lux (D) 30 Lux

Last Answer : Answer: Option D

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile