Fusion of bauxite and __________ produces high alumina cement. (A) Alum (B) Limestone (C) Coke (D) Quartz

Fusion of bauxite and __________ produces high alumina cement.
(A) Alum
(B) Limestone
(C) Coke
(D) Quartz
by

1 Answer

Answer :

(B) Limestone
by

Related questions

Fusion of limestone and __________ produces high alumina cement. (A) Sand (B) Bauxite (C) Quicklime (D) Calcite

Description : Fusion of limestone and __________ produces high alumina cement. (A) Sand (B) Bauxite (C) Quicklime (D) Calcite

Last Answer : (B) Bauxite

__________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese

Description : __________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese

Last Answer : (B) Limestone

rting raw material for the manufacture of alum is(A) Alumina(B) Gypsum(C) Bauxite(D) Ammonium bicarbonate

Description : rting raw material for the manufacture of alum is (A) Alumina (B) Gypsum (C) Bauxite (D) Ammonium bicarbonate

Last Answer : (C) Bauxite

Quartz is a crystalline form of - (1) Alumina (2) Glass (3) Silica (4) Limestone

Description : Quartz is a crystalline form of - (1) Alumina (2) Glass (3) Silica (4) Limestone

Last Answer : (3) Silica Explanation: Quartz is made up of a continuous framework of SiO4 silicon-oxygen tetrahedra, with each oxygen being shared between two tetrahedra, giving an overall formula SiO2. Tridymite ... is a denser polymorph of quartz found in some meteorite impact sites and in metamorphic rocks.

Quartz is a crystalline form of (1) Alumina (2) Glass (3) Silica (4) Limestone

Description : Quartz is a crystalline form of (1) Alumina (2) Glass (3) Silica (4) Limestone

Last Answer : Silica

Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite

Description : Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite

Last Answer : ANSWER: W -- COKE

Alum is commercially produced from (A) Gypsum (B) Feldspar (C) Galena (D) Bauxite

Description : Alum is commercially produced from (A) Gypsum (B) Feldspar (C) Galena (D) Bauxite

Last Answer : (D) Bauxite

__________ is used as a flux in the smelting of copper ore like chalcopyrite. (A) Coke breeze (B) Lime powder (C) Silica/quartz (D) Dolomite

Description : __________ is used as a flux in the smelting of copper ore like chalcopyrite. (A) Coke breeze (B) Lime powder (C) Silica/quartz (D) Dolomite

Last Answer : (C) Silica/quartz

Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium

Last Answer : (C) Nickel oxide on alumina support

Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Last Answer : (B) Sand

Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Description : Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Last Answer : (B) Soda ash

Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Which of the following is not used as a surface active agent in a flocculation operation? (A) Sodium silicate (B) Quartz (C) Lime (D) Alumina

Description : Which of the following is not used as a surface active agent in a flocculation operation? (A) Sodium silicate (B) Quartz (C) Lime (D) Alumina

Last Answer : (B) Quartz

Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Last Answer : (B) Limestone powder or alkalised alumina

Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Description : Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Last Answer : (A) Floating hollow polypropylene spheres

Production of one ton of cement requires about __________ tons of limestone. (A) 0.6 (B) 1.2 (C) 2.2 (D) 3.8

Description : Production of one ton of cement requires about __________ tons of limestone. (A) 0.6 (B) 1.2 (C) 2.2 (D) 3.8

Last Answer : (B) 1.2

Maximum consumption of limestone is in the __________ industry. (A) Iron and steel (B) Cement (C) Glass (D) Fertiliser

Description : Maximum consumption of limestone is in the __________ industry. (A) Iron and steel (B) Cement (C) Glass (D) Fertiliser

Last Answer : (D) Fertiliser

Processing of which minerals release huge amount of dust in the atmosphere? 1 a) Sandstone b) Iron ore c) Limestone d) Bauxite 15. -Geography

Description : Processing of which minerals release huge amount of dust in the atmosphere? 1 a) Sandstone b) Iron ore c) Limestone d) Bauxite 15. -Geography

Last Answer : C) Limestone

What is Khetri in Rajasthan famous for? (1) Copper mines (2) Mica mines (3) Bauxite mines (4) Limestone mines

Description : What is Khetri in Rajasthan famous for? (1) Copper mines (2) Mica mines (3) Bauxite mines (4) Limestone mines

Last Answer : (1) Copper mines Explanation: Kheiri is a town in Jhunjhunu district of Rajasthan. It s situated at the foothills of the Aravalli Range, which hosts copper mineralization, giving rise to a ... province from Singhana in the north to Raghunathgarh in the south, popularly known as Khetri Copper Belt.

Which is the most abundant mineral on earth’s crust? a. A Amphibole b. B Limestone c. C Feldspar d. D Quartz

Description : Which is the most abundant mineral on earth’s crust? a. A Amphibole b. B Limestone c. C Feldspar d. D Quartz

Last Answer : c. C Feldspar

Which is the most abundant mineral on earth’s crust? a. A Amphibole b. B Limestone c. C Feldspar d. D Quartz

Description : Which is the most abundant mineral on earth’s crust? a. A Amphibole b. B Limestone c. C Feldspar d. D Quartz

Last Answer : c. C Feldspar

The black sand of the Hawaiian Islands is composed of which of the following? w) dark limestone x) quartz y) gypsum z) basalt

Description : The black sand of the Hawaiian Islands is composed of which of the following? w) dark limestone x) quartz y) gypsum z) basalt

Last Answer : ANSWER: Z -- BASALT

Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Description : Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Last Answer : (D) High alumina & high magnesia

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity

Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas(B) Ammonia, salt and limestone(C) Ammonia limestone and coke(D) None of these

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Last Answer : Limestone, coke & iron ore

Which of the following contributes maximum as main source of sulphur in the blast furnace charge? (A) Sinter (B) Coke (C) Iron ore (D) Limestone

Description : Which of the following contributes maximum as main source of sulphur in the blast furnace charge? (A) Sinter (B) Coke (C) Iron ore (D) Limestone

Last Answer : Coke

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Description : As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times

Last Answer : Answer: Option A

Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Description : Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Last Answer : (c) High alumina cement

Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Description : Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Last Answer : d) Low heat cement*

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Why is extraction of aluminium not commercially viable by using reducing agents like coke? OR Coke is used in the extraction of iron but not in the extraction of aluminium. Why? OR Aluminium cannot be extracted by heating bauxite and coke. Why?

Description : Why is extraction of aluminium not commercially viable by using reducing agents like coke? OR Coke is used in the extraction of iron but not in the extraction of aluminium. Why? OR Aluminium cannot be extracted by heating bauxite and coke. Why?

Last Answer : Oxygen of aluminium oxide cannot be easily taken away by reducing agents like coke.

A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as

Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as

Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition

For melting one tonne of cast iron (A) 700 m3 air is required (B) 20 kg limestone is required (C) One quintal coke is required (D) All the above

Description : For melting one tonne of cast iron (A) 700 m3 air is required (B) 20 kg limestone is required (C) One quintal coke is required (D) All the above

Last Answer : Answer: Option D

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Rotary kilns are used in the (A) Calcination of limestone & dolomite (B) Cement manufacture (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Rotary kilns are used in the (A) Calcination of limestone & dolomite (B) Cement manufacture (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Persons working in cement plants and limestone quarries are more prone to disease like (A) Cancer (B) Asthma (C) Silicosis (D) Fluorosis (bone disease)

Description : Persons working in cement plants and limestone quarries are more prone to disease like (A) Cancer (B) Asthma (C) Silicosis (D) Fluorosis (bone disease)

Last Answer : (C) Silicosis

Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Description : Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Last Answer : (C) Slaked lime from quick lime

The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Description : The minimum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Alumina (D) Lime

Last Answer : Answer: Option A

Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Description : Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Last Answer : Answer: Option D

Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : Lime : Iron oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Description : The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Last Answer : Answer: Option A

In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Description : In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Last Answer : (d) Iron oxide

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Description : The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Last Answer : (a) 63:22:6:3