Production of one ton of cement requires about __________ tons of limestone. (A) 0.6 (B) 1.2 (C) 2.2 (D) 3.8

Production of one ton of cement requires about __________ tons of
limestone.
(A) 0.6
(B) 1.2
(C) 2.2
(D) 3.8
by

1 Answer

Answer :

(B) 1.2
by

Related questions

Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Description : Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Last Answer : (B) 2.5

The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Description : The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μm is (A) 6.35 kWh/ton (B) 9.0 kWh/ton (C) 18 kWh/ton (D) 25.4 kWh/ton

Last Answer : (C) 18 kWh/ton

Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Last Answer : (B) Sand

Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Rating of a domestic refrigerator is of the order of (a) 0.1 ton (b) 5 tons (c) 10 tons (d) 40 tons

Description : Rating of a domestic refrigerator is of the order of (a) 0.1 ton (b) 5 tons (c) 10 tons (d) 40 tons

Last Answer : Ans: a

Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Description : Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Last Answer : (C) Slaked lime from quick lime

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

Fusion of limestone and __________ produces high alumina cement. (A) Sand (B) Bauxite (C) Quicklime (D) Calcite

Description : Fusion of limestone and __________ produces high alumina cement. (A) Sand (B) Bauxite (C) Quicklime (D) Calcite

Last Answer : (B) Bauxite

Fusion of bauxite and __________ produces high alumina cement. (A) Alum (B) Limestone (C) Coke (D) Quartz

Description : Fusion of bauxite and __________ produces high alumina cement. (A) Alum (B) Limestone (C) Coke (D) Quartz

Last Answer : (B) Limestone

Maximum consumption of limestone is in the __________ industry. (A) Iron and steel (B) Cement (C) Glass (D) Fertiliser

Description : Maximum consumption of limestone is in the __________ industry. (A) Iron and steel (B) Cement (C) Glass (D) Fertiliser

Last Answer : (D) Fertiliser

A cane sugar factory having sugar production rate of 10 tons/day will produce about __________ tons/day of bagasse (after consumption by the factory for heating etc.). (A) 1 (B) 10 (C) 25 (D) 40

Description : A cane sugar factory having sugar production rate of 10 tons/day will produce about __________ tons/day of bagasse (after consumption by the factory for heating etc.). (A) 1 (B) 10 (C) 25 (D) 40

Last Answer : (B) 10

Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Description : Production of one ton of paper in Indian paper industry consumes about __________ kWh of electricity. (A) 300 (B) 800 (C) 1400 (D) 2000

Last Answer : (C) 1400

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

Refrigeration capacity of a household refrigerator may be round about __________ tons.(A) 0.15 (B) 1.5 (C) 4.5 (D) 6.5

Description : Refrigeration capacity of a household refrigerator may be round about __________ tons. (A) 0.15 (B) 1.5 (C) 4.5 (D) 6.5

Last Answer : (A) 0.15

Rotary kilns are used in the (A) Calcination of limestone & dolomite (B) Cement manufacture (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Rotary kilns are used in the (A) Calcination of limestone & dolomite (B) Cement manufacture (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Persons working in cement plants and limestone quarries are more prone to disease like (A) Cancer (B) Asthma (C) Silicosis (D) Fluorosis (bone disease)

Description : Persons working in cement plants and limestone quarries are more prone to disease like (A) Cancer (B) Asthma (C) Silicosis (D) Fluorosis (bone disease)

Last Answer : (C) Silicosis

Energy consumed for crushing one ton of material ranges from __________ kWh. (A) 0.01 to 0.1 (B) 0.5 to 1.5 (C) 2 to 3.5 (D) 4 to 5

Description : Energy consumed for crushing one ton of material ranges from __________ kWh. (A) 0.01 to 0.1 (B) 0.5 to 1.5 (C) 2 to 3.5 (D) 4 to 5

Last Answer : (B) 0.5 to 1.5

Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Description : Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Last Answer : (B) 1-1.3

Which one of the following is used in large quantities in Cement Industry? (1) Gypsum (2) Limestone (3) Coal (4) Clay

Description : Which one of the following is used in large quantities in Cement Industry? (1) Gypsum (2) Limestone (3) Coal (4) Clay

Last Answer : (2) Limestone Explanation: Limestone, as used by the minerals industry, is any rock composed mostly of calcium carbonate (CaCO3). Limestone is used to produce Portland cement, as aggregate ... products, making it a truly versatile commodity. Portland cement is essential to the building industry.

(1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement. clinker (more than 90%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Limestone is a raw material used by which industry? (1) Aluminium (2) Fertilizers (3) Cement (4) Petrochemicals

Description : Limestone is a raw material used by which industry? (1) Aluminium (2) Fertilizers (3) Cement (4) Petrochemicals

Last Answer : (3) Cement Explanation: Limestone is used as a rawmaterial for the manufacture of quicklime (calcium oxide), slaked lime (calcium hydroxide), cement and mortar. Clay and shale are also used as raw materials for the production of cement.

Chemical composition of cement is – (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Description : Chemical composition of cement is – (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Last Answer : (2) Limestone, Clay and Gypsum Explanation: The two important raw materials used for the preparation of cement are : • Limestone : The chemical formula of limestone is CaCO3 and it is used in the manufacture of cement just to provide CaO.

Cement is formed by strongly heating a mixture of – (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite

Description : Cement is formed by strongly heating a mixture of – (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite

Last Answer : (2) limestone and clay Explanation: Cement is made by heating limestone (calcium carbonate) with small quantities of other materials (such as clay) to 1450 degree C in a kiln, in a process known as ... , or quicklime, which is then blended with the other materials that have been included in the mix.

Which is/ are the important raw materials in cement industry? (1) Limestone (2) Gypsum and Clay (3) Clay (4) Limestone and Clay

Description : Which is/ are the important raw materials in cement industry? (1) Limestone (2) Gypsum and Clay (3) Clay (4) Limestone and Clay

Last Answer : (4) Limestone and Clay Explanation: Limestone Claimed Clay Cement is a low-carbon alternative to the standard Portland cement. LC3 can reduce CO2 emissions related to cement manufacturing of cement by reducing the amount of clinker, replacing it with limestone and claimed clays.

Chemical composition of cement is (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Description : Chemical composition of cement is (1) Limestone and Clay (2) Limestone, Clay and Gypsum (3) Limestone and Gypsum (4) Clay and Gypsum

Last Answer :  Limestone, Clay and Gypsum

Limestone is a raw material used by which industry? (1) Aluminium (2) Fertilizers (3) Cement (4) Petrochemicals

Description : Limestone is a raw material used by which industry? (1) Aluminium (2) Fertilizers (3) Cement (4) Petrochemicals

Last Answer : Cement

Cement is formed by strongly heating a mixture of (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite

Description : Cement is formed by strongly heating a mixture of (1) limestone and graphite (2) limestone and clay (3) chalk and graphite (4) clay and graphite 

Last Answer : limestone and clay

Mercury electrolytic cells are preferred over diaphragm electrolytic cell (for production of caustic soda), as it (A) Has larger production capacity per unit cell (B) Consumes less power per ton of Cl2 produced (C) Produces high purity (70%) caustic soda directly (D) All (A), (B) and (C)

Description : Mercury electrolytic cells are preferred over diaphragm electrolytic cell (for production of caustic soda), as it (A) Has larger production capacity per unit cell (B) Consumes less power per ton of Cl2 produced (C) Produces high purity (70%) caustic soda directly (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

COP of a refrigerator drawing 1 kW of power per ton of refrigeration is about (A) 0.5 (B) 3.5 (C) 4.5 (D) 8.5

Description : COP of a refrigerator drawing 1 kW of power per ton of refrigeration is about (A) 0.5 (B) 3.5 (C) 4.5 (D) 8.5

Last Answer : (B) 3.5

Raw materials required for the production of CAN (Calcium ammonium nitrate) is NH3 (A) HNO3 & limestone (B) CO2 & H2SO4 (C) HNO3 & NH4Cl (D) CO2 & KNO3

Description : Raw materials required for the production of CAN (Calcium ammonium nitrate) is NH3 (A) HNO3 & limestone (B) CO2 & H2SO4 (C) HNO3 & NH4Cl (D) CO2 & KNO3

Last Answer : (A) HNO3 & limestone

Ammonium nitrate (a fertiliser) is coated with limestone powder to (A) Increase its nitrogen content (B) Cut down its production cost (C) Avoid the risk of explosion (D) Add extra nutrient as fertiliser

Description : Ammonium nitrate (a fertiliser) is coated with limestone powder to (A) Increase its nitrogen content (B) Cut down its production cost (C) Avoid the risk of explosion (D) Add extra nutrient as fertiliser

Last Answer : (C) Avoid the risk of explosion

Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Description : Yield of coke oven gas in low temperature carbonisation of coal is about __________ Nm3 /ton of dry coal. (A) 60 (B) 160 (C) 500 (D) 750

Last Answer : (B) 160

Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around __________ Nm3 . (A) 30 (B) 300 (C) 3,000 (D) 30,000

Description : Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around __________ Nm3 . (A) 30 (B) 300 (C) 3,000 (D) 30,000

Last Answer : (B) 300

Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000

Last Answer : (B) 2000

Gas yield in the Kopper-Totzek coal gasifier is about __________ Nm3 /ton coal (ash = 35%). (A) 150 (B) 1500 (C) 3500 (D) 5000

Description : Gas yield in the Kopper-Totzek coal gasifier is about __________ Nm3 /ton coal (ash = 35%). (A) 150 (B) 1500 (C) 3500 (D) 5000

Last Answer : (C) 3500

A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg. (A) 10 (B) 100 (C) 1000 (D) 10000

Description : A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg. (A) 10 (B) 100 (C) 1000 (D) 10000

Last Answer : (B) 100

The optimum size of the ammonia plant is __________ tons/day. (A) 10 (B) 100 (C) 1000 (D) 1000

Description : The optimum size of the ammonia plant is __________ tons/day. (A) 10 (B) 100 (C) 1000 (D) 1000

Last Answer : (C) 1000

Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Description : Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Last Answer : (C) Water

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

In question No. 53 if the economy produces only 3 guns and 900 tons of wheat instead of 1100 tons of wheat what does it indicates (a) Under employment of resources ; (b) Production in efficiency ; (c) Sub-optimal production; (d) All the three

Description : In question No. 53 if the economy produces only 3 guns and 900 tons of wheat instead of 1100 tons of wheat what does it indicates (a) Under employment of resources ; (b) Production in efficiency ; (c) Sub-optimal production; (d) All the three

Last Answer : (d) All the three 

Opportunity cost of increasing production of Gun to 5 units in combination F is –tons of bread (a) 200 ; (b) 100 ; (c) 600 ; (d) 500

Description : Opportunity cost of increasing production of Gun to 5 units in combination F is –tons of bread (a) 200 ; (b) 100 ; (c) 600 ; (d) 500

Last Answer :  (c) 600

Opportunity cost of increasing production of Gun to 4 units in combination E is –tons of bread (a) 200 ; (b) 500 ; (c) 300 ; (d) 400

Description : Opportunity cost of increasing production of Gun to 4 units in combination E is –tons of bread (a) 200 ; (b) 500 ; (c) 300 ; (d) 400

Last Answer :  (b) 500

Opportunity cost of increasing production of Gun to 3 units in combination D is –tons of bread (a) 200 ; (b) 100 ; (c) 300 ; (d) 400

Description : Opportunity cost of increasing production of Gun to 3 units in combination D is –tons of bread (a) 200 ; (b) 100 ; (c) 300 ; (d) 400

Last Answer : ; (d) 400

Roughly what is the total weight of air in the entire earth?  a. 1 x 10^5 tons  b. 2 x 10^6 tons  c. 6 x 10^15 tons  d. 8 x 10^10 tons

Description : Roughly what is the total weight of air in the entire earth?  a. 1 x 10^5 tons  b. 2 x 10^6 tons  c. 6 x 10^15 tons  d. 8 x 10^10 tons

Last Answer : 6 x 10^15 tons

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

The general rule for rating refrigeration systems (excepting for CO2 system) is to approximate following h.p. per ton of Refrigeration (a) 0.1 to 0.5 h.p. per ton of refrigeration (b) 0.5 to 0.8 h.p. per ton of refrigeration (c) 1 to 2 h.p. per ton of refrigeration (d) 2 to 5 h.p. per ton of refrigeration

Description : The general rule for rating refrigeration systems (excepting for CO2 system) is to approximate following h.p. per ton of Refrigeration (a) 0.1 to 0.5 h.p. per ton of refrigeration (b) 0.5 to 0.8 h.p. per ... (c) 1 to 2 h.p. per ton of refrigeration (d) 2 to 5 h.p. per ton of refrigeration

Last Answer : Ans: c

Calcination of limestone to produce lime is done in a __________ kiln. (A) Tunnel (B) Rotary (C) Vertical shaft (D) Both (B) and (C)

Description : Calcination of limestone to produce lime is done in a __________ kiln. (A) Tunnel (B) Rotary (C) Vertical shaft (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40