Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Starting raw material for the manufacture of Maleic anhydride is
(A) n-butene
(B) Benzene
(C) Either (A) or (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Either (A) or (B)
by

Related questions

Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Last Answer : (B) Vinyl chloride

Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr

Description : Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr

Last Answer : (A) V2O5

Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Description : Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Last Answer : (D) Benzene

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine

Description : Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine

Last Answer : (A) Caprolactam

Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Last Answer : (A) Formaldehyde

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Last Answer : (A) Caprolactam

Caprolactam, a raw material for the manufacture of nylon-6, isproduced from(A) Phenol(B) Naphthalene(C) Benzene(D) Pyridine

Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Geometrical isomerism is shown by (a) Lactic acid (b) Maleic acid (c) 1-Butene (d) 1,1-Dichloroethylene

Description : Geometrical isomerism is shown by (a) Lactic acid (b) Maleic acid (c) 1-Butene (d) 1,1-Dichloroethylene

Last Answer : Maleic acid

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol

Description : Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol

Last Answer : (B) Perchloroethylene

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of styrene butadiene rubber (SBR) is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Starting material for the production of butadiene in India is (A) Naphthalene (B) Benzol (C) Ethyl alcohol (D) Phthalic anhydride

Description : Starting material for the production of butadiene in India is (A) Naphthalene (B) Benzol (C) Ethyl alcohol (D) Phthalic anhydride

Last Answer : (C) Ethyl alcohol

Starting material for the production of butadiene in India is (A) Naphthalene (B) Benzol(C) Ethyl alcohol(D) Phthalic anhydride

Description : Starting material for the production of butadiene in India is (A) Naphthalene (B) Benzol (C) Ethyl alcohol (D) Phthalic anhydride

Last Answer : (C) Ethyl alcohol

Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Description : Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Last Answer : (A) Oxidation of naphthalene

Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene(D) Aniline

Description : Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene (D) Aniline

Last Answer : (B) Benzene

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Description : The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Last Answer : B. -i

Amitryptyline is synthesized from the following starting material : (A) Phthalic anhydride (B) Terephthalic acid (C) Phthalamic acid (D) Phthalimide

Description : Amitryptyline is synthesized from the following starting material : (A) Phthalic anhydride (B) Terephthalic acid (C) Phthalamic acid (D) Phthalimide

Last Answer : (B) Terephthalic acid

If a firm, or a network firm, has a direct financial interest in an audit client of the firm, the self-interest threat created would be so significant no safeguard could reduce the threat to an acceptable level. The action appropriate to permit the firm to perform the engagement would be to a. Dispose of the financial interest. b. Dispose of a sufficient amount of it so that the remaining interest is no longer material. c. Either a or b d. Neither a nor b

Description : If a firm, or a network firm, has a direct financial interest in an audit client of the firm, the self-interest threat created would be so significant no safeguard could reduce the threat to an acceptable ... that the remaining interest is no longer material. c. Either a or b d. Neither a nor b

Last Answer : Dispose of the financial interest

Classify the following into saturated and unsaturated hydrocarbons – Benzene, cyclopropane, alkene and alkane, methane, ethene, Propyne, butene

Description : Classify the following into saturated and unsaturated hydrocarbons – Benzene, cyclopropane, alkene and alkane, methane, ethene, Propyne, butene

Last Answer : Saturated: Alkane, cyclopropane, methane Unsaturated: Benzene, alkene, ethene, Propyne, butene

Rotary kilns are used in the (A) Calcination of limestone & dolomite (B) Cement manufacture (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Rotary kilns are used in the (A) Calcination of limestone & dolomite (B) Cement manufacture (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to (A) Flocculate the impurities(B) Facilitate fast filtration(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to (A) Flocculate the impurities (B) Facilitate fast filtration (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Benzene reacts with acetic anhydride in the presence of AlCl3 to form (a) Acetophenone (b) Benzophenone (c) Phenylacetic acid (d) Phenyl acetate

Description : Benzene reacts with acetic anhydride in the presence of AlCl3 to form (a) Acetophenone (b) Benzophenone (c) Phenylacetic acid (d) Phenyl acetate

Last Answer : Acetophenone

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Last Answer : (C) V2O5

Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Last Answer : (A) Detergent

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

rting raw material for the manufacture of alum is(A) Alumina(B) Gypsum(C) Bauxite(D) Ammonium bicarbonate

Description : rting raw material for the manufacture of alum is (A) Alumina (B) Gypsum (C) Bauxite (D) Ammonium bicarbonate

Last Answer : (C) Bauxite

In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Description : In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Last Answer : (D) Fine teak wood

Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Description : Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Fluid medium used in the classification technique of mineral beneficiation is (A) Air (B) Water (C) Either (A) or (B) (D) Neither (A) nor (B

Description : Fluid medium used in the classification technique of mineral beneficiation is (A) Air (B) Water (C) Either (A) or (B) (D) Neither (A) nor (B

Last Answer : (C) Either (A) or (B)

Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Description : A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B); depends on the type of catalyst