In the manufacture of viscose rayon, the raw material used industrially
is
(A) Eucalyptus wood
(B) Bamboo
(C) Bagasse
(D) Fine teak wood

1 Answer

Answer :

(D) Fine teak wood

Related questions

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Description : Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Last Answer : (B) Utilises H2SO4 , NaOH and CS2 during its manufacture

Last Answer : Cotton lintus , bamboo pulp , wood pulp

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Which of the following is an additional step in the manufacture of paper from bagasse as compared to that from bamboo? (A) Depithing (B) Digestion (C) Bleaching (D) None of these

Last Answer : (A) Depithing

Description : Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Last Answer : B. Poplar (Answer)

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Description : Which of the following is not a natural fibre? (A) Silk (B) Viscose rayon (C) Wool (D) Cotton

Last Answer : (B) Viscose rayon

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Description : For spinning viscose rayon, the extrusion spinnerettes are made of (A) Platinum or gold alloys (B) High carbon steel (C) Aluminium (D) Nickel

Last Answer : (A) Platinum or gold alloys

Description : Viscose rayon is chemically (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Cellulose acetate (D) Regenerated cellulose acetate

Last Answer : (D) Regenerated cellulose acetate

Description : Carbon disulphide is mainly used in the production of(A) Viscose rayon (B) Corundum (C) Plasticiser for unsaturated polyester (D) Paints

Last Answer : (A) Viscose rayon

Description : Viscose rayon is (A) Cellulose nitrate (B) Regenerated cellulose nitrate (C) Regenerated cellulose acetate (D) None of these

Last Answer : (D) None of these

Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Last Answer : Answer: Option C

Last Answer : Viscose rayon regenerated cellulosic fiber. That is to make cellulose cellulose with chemicals again. Some other regenerated fibers are modal , tensile.

Description : A polymeric substance used to make parachute is – (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Last Answer : (2) Viscose Explanation: Viscose is a viscous organic liquid used to make rayon and cellophane. Viscose is also used as shorthand for Viscose Rayon, thus becoming synonymous with rayon, a soft man-made fibre commonly used in dresses, linings shirts, shorts, coats, jackets, and other outer wear.

Description : Retting is used in the processing of which of the following fibres: a. Cotton b. Linen c. Silk d. Viscose rayon

Last Answer : b. Linen

Description : Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Last Answer : b. Cotton

Description : A polymeric substance used to make parachute is (1) Rayon (2) Viscose (3) Cotton (4) Terylene

Last Answer : Viscose

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

Description : A type of cardboard prepared by using bagasse as raw material is

Last Answer : celotex.

Description : Bagasse is used as a raw material to prepare cardboard known as

Last Answer : celotex.

Description : Bagasse is used as a raw material to prepare

Last Answer : cardboard.

Description : Give one use of each: teak, sal, myrobalan, sisam, sandalwood, eucalyptus. -SST 10th

Last Answer : Teak: It is the most important of the deciduous trees. It is used for house construction, furniture, ship-building. It is hard and durable. It resists while ants and nails dor not rust in ... lofty stature. Its wood is raw material for the paper industry. Eucalyptus oil is also available from it.

Description : Plants are associated with the social forestry programmes in India? (a) Teak (b) Neem (c) Eucalyptus (d) Banyan

Last Answer : Ans: (c)

Description : Which one of the following is a fast growing tree? (a) Teak (b) Eucalyptus (c) Banyan (d) Coconut

Last Answer : Ans:(b)

Description : The common tree species in Nilgiri hills is – (1) Sal (2) Pine (3) Eucalyptus (4) Teak

Last Answer : (3) Eucalyptus Explanation: Nilgiri mountains are a range of mountains with at least 24 peaks above 2,000 metres (6,600 ft), in the westernmost part of Tamil Nadu state at the ... larger Western Ghats mountain chain making up the southwestern edge of the Deccan Plateau. Eucalyptus is common.

Description : Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Last Answer : C. Paper (Answer)

Description : The chief raw material used for manufacturing Rayon is : (1) Nylon (2) Cellulose (3) Silicon (4) Radium and Argon

Last Answer : (2) Cellulose Explanation: Rayon is a manufactured regenerated cellulose fiber. Because it is produced from naturally occurring polymers, it is neither a truly synthetic fiber nor a natural fiber; it is a semi-synthetic or artificial fiber.

Description : The chief raw material used for manufacturing Rayon is : (1) Nylon (2) Cellulose (3) Silicon (4) Radium and Argon

Last Answer : Cellulose

Description : Are there advantages to a bamboo-derived rayon duvet cover?

Last Answer : Thanks for asking this question because as a designer I know little about bamboo fabric and it forced me to do a bit of research out of curiosity. I found this explanation of the ... to know if it has the great properties inherent in bamboo. http://organic.lovetoknow.com/Organic_Bamboo_Fabric

Description : Which of the following statements is false about cellulose? (a) It is a polymer of glucose molecules joined in β-1,4 linkages. (b) It is a major component of cotton. (c) It is used in the manufacture of Dacron fibres. (d) It is used in the manufacture of Rayon fibres

Last Answer : It is used in the manufacture of Dacron fibres.

Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Description : Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Description : rting raw material for the manufacture of alum is (A) Alumina (B) Gypsum (C) Bauxite (D) Ammonium bicarbonate

Last Answer : (C) Bauxite

Description : Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Description : Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol

Last Answer : (B) Perchloroethylene

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Description : Which one of the following raw material is used in the manufacture of foam used in mattresses cushions etc. A. Phenol B. Urea C. Methanol D. Ethanol

Last Answer : ANSWER: A

Description : What are the raw material used for the manufacture of washing soda by solvay process ?

Last Answer : Ans. Nacl, CaCO3 and NH3

Description : The raw material used to manufacture ethyl alcohol is

Last Answer : molasses.

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C