Catalytic oxidation of toluene produces (A) Styrene (B) Phenol (C) Benzene (D) Tri-nitro-toluene

Catalytic oxidation of toluene produces
(A) Styrene
(B) Phenol
(C) Benzene
(D) Tri-nitro-toluene
by

1 Answer

Answer :

(B) Phenol
by

Related questions

Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Description : Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Last Answer : (C) Phthalic anhydride

Blasting of tri-nitro-toluene (TNT) is done by mixing it with ammonium (A) Nitrate (B) Sulphate (C) Carbonate (D) Chloride

Description : Blasting of tri-nitro-toluene (TNT) is done by mixing it with ammonium (A) Nitrate (B) Sulphate (C) Carbonate (D) Chloride

Last Answer : (A) Nitrate

Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Description : Dehydrogenation of ethyl benzene produces (A) Styrene (B) Naphthalene (C) Phenol (D) Benzoic acid

Last Answer : (A) Styrene

Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Description : Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Last Answer : (D) Benzene

TNT - Tri Nitro Toluene is known as?

Description : TNT - Tri Nitro Toluene is known as?

Last Answer : Trotyl

What is the common name for 2,4,6, Trinitrotoluene (read: tri-nitro-toluene)?

Description : What is the common name for 2,4,6, Trinitrotoluene (read: tri-nitro-toluene)? 

Last Answer : ANSWER: TNT

Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Last Answer : (A) Formaldehyde

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

__________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Description : __________ is produced by the dehydrogenation of ethyl benzene. (A) Styrene (B) Ethyl alcohol (C) Cumene (D) Phenol

Last Answer : (A) Styrene

. Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Description : . Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Last Answer : (A) Benzene, toluene & xylene

Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene

Description : Acetone is produced by catalytic dehydrogenation of (A) Phenol (B) Naphthalene (C) Isopropanol (D) Ethyl benzene

Last Answer : (C) Isopropanol

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation

Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Description : Styrene is produced from ethyl benzene by the process of (A) Dehydrogenation (B) Oxidation (C) Alkylation (D) Dehydration

Last Answer : (A) Dehydrogenation

Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene(D) Aniline

Description : Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene (D) Aniline

Last Answer : (B) Benzene

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Last Answer : (C) Polychlorophrene

Cumene is the starting material for the production of (A) Benzoic acid (B) Phenol and acetone (C) Isoprene (D) Styrene

Description : Cumene is the starting material for the production of (A) Benzoic acid (B) Phenol and acetone (C) Isoprene (D) Styrene

Last Answer : (B) Phenol and acetone

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene-butadiene rubber

Last Answer : (C) Polychlorophrene

Synthetic glycerine is produced from (A) Toluene (B) Phenol (C) Propylene (D) Naphthalene

Description : Synthetic glycerine is produced from (A) Toluene (B) Phenol (C) Propylene (D) Naphthalene

Last Answer : (C) Propylene

Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (i) Phenol (ii) Cyclohexanol (iii) 2, 4-di nitro phenol (iv) Benzoic (v)

Description : Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (i) Phenol (ii) Cyclohexanol (iii) 2, 4-di nitro phenol (iv) Benzoic (v)

Last Answer : Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (i) Phenol (ii) ... ) `alpha-` naphthol (ix) N-methyl aniline

. Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel(C) Consecutive(D) None of these

Description : . Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel (C) Consecutive (D) None of these

Last Answer : (C) Consecutive

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Description : A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Last Answer : (B) Acetone-carbon disulphide

Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Description : Which of the following solutions will follow Raoult's law most closely? (A) A solution of benzene, toluene and o-xylene (B) 35% solution of camphor in water (C) 35% solution of NH3 in water (D) A solution of polar organic compounds (not of homologue of a series)

Last Answer : (A) A solution of benzene, toluene and o-xylene

Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)

Description : Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)

Last Answer : (B) Ethyl alcohol-water

Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Trinitrotoluene (TNT), an explosive, is made by the nitration of (A) Nitrobenzene (B) Toluene (C) Nitrotoluene (D) Benzene

Description : Trinitrotoluene (TNT), an explosive, is made by the nitration of (A) Nitrobenzene (B) Toluene (C) Nitrotoluene (D) Benzene

Last Answer : (B) Toluene

The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Description : The terminology 'BTX' used in coal tar distillation industry refers to (A) Benzol-toluol-xylol (B) Benzol-toluene-xylene (C) Benzene-toluol-xylol (D) Benzene-toluene-xylene

Last Answer : (D) Benzene-toluene-xylene

A solution contains 1g mol. Each of p-toluene diazonium chloride and p-nitrophenyl diazonium cholride. To this 1g mol.of alkaline solution of phenol i

Description : A solution contains 1g mol. Each of p-toluene diazonium chloride and p-nitrophenyl diazonium cholride. To this 1g mol.of alkaline solution of phenol i

Last Answer : A solution contains 1g mol. Each of p-toluene diazonium chloride and p-nitrophenyl diazonium ... Predict the major product. Explain your answer.

Saccharin is made up of – (1) Toluene (2) Phenol (3) Propane (4) Butane

Description : Saccharin is made up of – (1) Toluene (2) Phenol (3) Propane (4) Butane

Last Answer : (1) Toluene Explanation: Saccharin can be produced in various ways. The original route by Remsen & Fahlberg starts with toluene. Saccharin ism artificial sweetener. The basic substance, benzoic sulfiloine ... It is used to sweeten products such as drinks, candies, cookies, medicines, and toothpaste.

Which of the following compounds reacts least rapidly in electrophilic substitution reactions? (a) Nitrobenzene (b) Phenol (c) Bromobenzene (d) Toluene

Description : Which of the following compounds reacts least rapidly in electrophilic substitution reactions? (a) Nitrobenzene (b) Phenol (c) Bromobenzene (d) Toluene

Last Answer : Nitrobenzene

Saccharin is made up of (1) Toluene (2) Phenol (3) Propane (4) Butane

Description : Saccharin is made up of (1) Toluene (2) Phenol (3) Propane (4) Butane

Last Answer : Toluene

Chemical name of Gammaxane is - (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Description : Chemical name of Gammaxane is - (1) Toluene (2) Chloro benzene (3) Aniline (4) Benzene hexachloride

Last Answer : (4) Benzene hexachloride Explanation: Gammexane is an insecticide that is the gamma isomer of benzene hexachloride. It is also known as lindane. Benzene hexachloride is any of several stereoisomers of 1,2,3,4,5,6- hexachlorocyclohexane formed by the lightinduced addition of chlorine to benzene.

A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Description : A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Last Answer : (2) Ideal solution Explanation: A mixture of benzene and toluene (60 mole% toluene) enters a distillation column to be separated into two product streams.

Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Description : Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Last Answer : Ans. -CH3 group is electron donating while –NO2 group is electron withdrawing. Therefore, maximum electron density will be in toluene , followed by benzene and at least in m-dinitrobenzene. Therefore, the ease of nitration decreases in the order: Toluene> benzene> m-dinitrobenzene

Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Description : Out of benzene, m–dinitrobenzene and toluene which will undergo nitration most easily and why?

Last Answer : Ans. -CH3 group is electron donating while –NO2 group is electron withdrawing. Therefore, maximum electron density will be in toluene, followed by benzene and at least in m-dinitrobenzene. Therefore, the ease of nitration decreases in the order: Toluene> benzene> m-dinitrobenzene

Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Description : Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene

Last Answer : Benzene

Which of the following compounds is most readily sulfonated? (a) Benzene (b) Chlorobenzene (c) Toluene (d) Nitrobenzene

Description : Which of the following compounds is most readily sulfonated? (a) Benzene (b) Chlorobenzene (c) Toluene (d) Nitrobenzene

Last Answer : Toluene

Which of the following compounds undergoes nitration most readily? (a) Benzene (b) Toluene (c) Nitrobenzene (d) Benzoic acid

Description : Which of the following compounds undergoes nitration most readily? (a) Benzene (b) Toluene (c) Nitrobenzene (d) Benzoic acid

Last Answer : Toluene

Compared to benzene, nitration of toluene takes place at (a) Same rate (b) Faster rate (c) Slower rate(d) Can not predict

Description : Compared to benzene, nitration of toluene takes place at (a) Same rate (b) Faster rate (c) Slower rate (d) Can not predict

Last Answer : Faster rate

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

Cresols on distillation with zinc dust gives (a) o-Xylene(b) Benzene(c) o- plus p-Xylene(d) Toluene

Description : Cresols on distillation with zinc dust gives (a) o-Xylene (b) Benzene (c) o- plus p-Xylene (d) Toluene

Last Answer : Toluene

Which of the following statements is false about toluene? (a) can be prepared by treating benzene with methyl chloride in the presence of AlCl3. (b) is converted to benzoic acid on refluxing with acidic KMnO4 solution. (c) on refluxing with concentrated H2SO4 gives a mixture of ortho and para toluenesulfonic acid. (d) can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene.

Description : Which of the following statements is false about toluene? (a) can be prepared by treating benzene with methyl chloride in the presence of AlCl3. (b) is converted to benzoic acid on refluxing with ... (d) can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene.

Last Answer : can be nitrated with concentrated nitric acid to give a mixture of ortho and meta nitrotoluene

When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene(b) Toluene(c) m-Xylene(d) Mesitylene

Description : When propyne is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) m-Xylene (d) Mesitylene

Last Answer : Mesitylene

When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Description : When acetylene is passed through hot iron tube at 400°C, it gives (a) Benzene (b) Toluene (c) o-Xylene (d) Mesitylene

Last Answer : Benzene

40. Among the fo the one that is most reactive towards electrophilic nitration is: (1) Benzene (2) Benzoic acid (3) Nitrobenzene (4) Toluene

Description : 40. Among the following compounds the one that is most reactive towards electrophilic nitration is: (1) Benzene (2) Benzoic acid (3) Nitrobenzene (4) Toluene

Last Answer : Toluene