Description : .Large tilt angle best for a) Hard soil b) Sticky and non-scouring soil c) Dry and cemented soil d None of the above
Last Answer : b) Sticky and non-scouring soil
Description : which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )
Last Answer : c) Friable ( crumbly
Description : The movement of soil across a tool surface without sticking is called as a. Pulverisation b. Inversion c. Scouring d. Turning
Last Answer : c. Scouring
Description : Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than ... c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above
Last Answer : a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face
Description : Penetration of disc plough can be improved by a. Increasing disc angle b. Decreasing tilt angle c. Both a & b d. None of these
Last Answer : b. Decreasing tilt angle
Description : The Auger boring method is not suitable for (A) Very hard soil (B) Cemented soil (C) Vary soft soil (D) All the above
Last Answer : Answer: Option D
Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and, showy
Last Answer : (2) rough and sticky Explanation: Pollen grains are large sticky and heavy, usually with rough surfaces so that they can readily cling onto the insects bodies. They are sticky so that pollen grains settling on them are not easily displaced.
Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and showy
Last Answer : rough and sticky
Description : Scouring indicates: A. movement of soil on tool surface B. sticking of soil on tool surface C. inversion of soil D. none of the above
Last Answer : A. movement of soil on tool surface
Description : _________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning
Last Answer : c) Scouring
Description : The slat type mold board is used in a) Sticky soil b) Hard soil c) Loose soil d) Stoney and trashy soil Ans. a
Last Answer : ans a
Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed
Last Answer : p. For operating on the sides of plant bed
Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions
Last Answer : i. Minimum tillage of trashy land at shallow depths
Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions
Last Answer : f. Dried hard soils
Description : Disc type furrow openers are especially suited to A. Stoney and root infested soils B. Poorly prepared bed in trashy soil C. Hard and sticky soil with considerable amount of debris and mulch D. All of the above
Last Answer : C. Hard and sticky soil with considerable amount of debris and mulch
Description : At what angle does the Earth tilt on its axis? -General Knowledge
Last Answer : answer:
Description : Why is the angle of the orbit (tilt) the moon uses to revolve around the sun?
Last Answer : The orbit of the moon around the sun is a wiggle around theEarth's orbit - because the moon is locked into the Earth'sgravitational grasp.The angle of the moon's orbit around the Earth was set by thecollision that formed the moon.
Description : Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°
Last Answer : (D) 45°
Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c
Last Answer : Ans.c
Description : The tilt angle varies form…° to….. °. For a good plough a. 20°,30°. c) 15°,30° b. 10°,30°. d) 15°,25°
Last Answer : 15°,25°
Description : Width of cut of disc plow is increased by a)Increasing disc angle b)Increasing tilt angle c)addition of more weight d)Decreasing disc angle
Last Answer : a)Increasing disc angle
Description : The depth of penetration of a disc harrow is increased by: a) Tilt angle b) Gang angle c) Disc angle d) All of above
Last Answer : b) Gang angle
Description : Penetration of disc plough can be improved by a) Increase disc angle b) Decreasing tilt angle c) Both (a) and (b) d) None of the above
Last Answer : b) Decreasing tilt angle
Description : i have a cemented backyard. can i pour some black soil on it and plant green grass?
Last Answer : Paint the cement green and put out fancy pots of flowers and other decorations. My parents moved into a house with a cement front yard and loved it. They never wanted grass to mow, water, fertilize, mow, water, fertilize, etc.
Description : 221 For non-scouring velocity 5 m/sec, the type of sewers generally preferred to, is A. Cast iron sewers B. Cement concrete sewers C. Glazed bricks sewers D. Stone ware sewers
Last Answer : ANS: C
Description : In sewers the highest non-scouring velocity is achieved in A. Glazed bricks sewers B. Cast iron sewers C. Cement concrete sewers D. Stone ware sewers
Last Answer : ANS: A
Description : Cement concrete sewers are only suitable if non-scouring velocity is between A. 2.5 to 3.0 m/sec B. 3.0 to 4.0 m/sec C. 3.5 to 4.5 m/sec D. 4.5 to 5.5 m/sec
Description : Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky
Last Answer : (B) Large quantity of very fine
Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool
Last Answer : (D) Non-ferrous cast alloy cutting tool
Description : Rotary dryers cannot handle __________ materials. (A) Free flowing (B) Dry (C) Sticky (D) Granular
Last Answer : (C) Sticky
Description : Why scouring of the wool is necessary step during the processing of wool? -Science-7
Last Answer : Scouring is an important step in wool processing. During the growth of the wool fibre it becomes coated with grease, salt and contaminated with dirt, dust and other matter. So to remove these types of matter scouring is important
Description : Why scouring of wool is a necessary step during the processing of wool? -Science-7
Last Answer : Scouring is an important step because in this dirt, sand, grease etc. are removed from the wool .This makes the wool suitable for making fabric.
Description : With self cleansing velocity in sewers A. Silting occurs at bottom B. Scouring occurs at bottom C. Both silting and scouring occur at bottom D. Neither silting nor scouring occurs at bottom
Last Answer : ANS: D
Description : In sewers designed with self cleansing velocity, A. The bottom is silted B. The bottom is scoured C. Both silting and scouring occur at the bottom D. Neither silting nor scouring occurs at the bottom
Description : In sewers the effect of scouring is more on A. Top side B. Bottom side C. Horizontal side D. All sides
Last Answer : ANS: B
Description : Scouring is a finishing operation during the manufacture of fibre, which aims at __________ of fibres. (A) Improving the stretchability (B) Dyeing/colouring (C) Detergent solution washing (D) Glycol soaking
Last Answer : (C) Detergent solution washing
Description : A river bend characterized by silting (A) Scouring on concave side (B) Silting on convex side (C) Scouring on convex side and on concave side (D) Scouring on concave side and silting on convex side
Description : An aggrading river is a (A) Silting river (B) Scouring river (C) Both silting and scouring river (D) Neither silting nor scouring river
Last Answer : Answer: Option A
Description : Which element on adding to natural rub- ber makes it less sticky in hot weather and less hard in cold weather?
Last Answer : Sulphur
Description : What was the blue sand and sticky soil that one group of miners including a man named Henry Comstock discovered in Nevada?
Last Answer : Feel Free to Answer
Description : What do you understand by the word regur ? (a) Black soil found in the Deccan (b) Grey-brown soil found in Russia (c) Red, colour sticky soil, found in the Amazon area (d) Black soil found in northern Argentina shop.ssbcrack.com
Last Answer : Ans: (a)
Description : This type mould boars plough is used for sticky soil. b. Sod or breaker c. Stubble d. None of the above
Last Answer : Ans –a. Slat type
Description : Have you had a dental crown re-cemented after it fell off ?
Last Answer : No, not a permanent one. Usually there is damage/rot under the crown and that is why it fell off. More work to the tooth is required before another crown is put on.
Description : The bond of alliance between the Congress and the Muslim League was cemented by the conclusion of the Lucknow Pact in 1916. -SST 10th
Last Answer : Independent Unit: India was to be treated as an independent unit of the Empire, as a self autonomous state with equal rights and responsibility. Provincial Legislatures: Four-fifth of the members of ... to the Government of India as he does in relation to the government of self governing colonies.
Description : What is sediments that buried compacted and cemented together called?
Last Answer : What is the answer ?
Description : What kind of rock is formed from sediments that have been cemented or compacted?
Last Answer : Need answer
Description : Should fence posts be cemented in or gravel put in the holes ?
Last Answer : If you want your fence to last for a very long time I would definitely recommend cementing the posts in.
Description : Can a acrylic fixed upper roundhouse that was cemented over seven implants be sucessfully removed without causing problems with the implants If so, can another new roundhouse be made that can be screwed in so proper cleaning process can take place ?
Last Answer : IMPLANTS ARE SO PAINFUL I know there are dentise that can make your teeth to snap on and you can eat properly and speak You can get an new roundhoust that can be used over several implants in and can be correctly installed.
Description : how do we fit it in a bathroom Does it come with a stand with rollers that can be moved about or should it be cemented the floor?
Last Answer : Established in 1997, Madonna Home Solutions, has been amongst the pioneers in the introduction of Acrylic Bathtubs to the Indian market. Very soon, the company expanded its portfolio to include Shower ... Near Clarion Inn, Sirhind Road, Patiala - 147001 Contact Details: Landline: 0175-2354616, 017
Description : Plasmodesmata are (a) locomotory structures (b) membranes connecting the nucleus with plasmalemma (c) connections between adjacent cells (d) lignified cemented layers between cells.
Last Answer : (c) connections between adjacent cells