Rotary dryers cannot handle __________ materials. (A) Free flowing (B) Dry (C) Sticky (D) Granular

Rotary dryers cannot handle __________ materials.
(A) Free flowing
(B) Dry
(C) Sticky
(D) Granular
by

1 Answer

Answer :

(C) Sticky
by

Related questions

Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Description : Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Last Answer : (A) Rotary

Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Last Answer : (B) Sticky (e.g. clay paste

For continuous drying of granular or crystalline material, the dryer used is the __________ dryer.(A) Tunnel (B) Tray (C) Rotary (D) None of these

Description : For continuous drying of granular or crystalline material, the dryer used is the __________ dryer. (A) Tunnel (B) Tray (C) Rotary (D) None of these

Last Answer : (C) Rotary

Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the screening of the (A) Light metal powder down upto 4 mesh size (B) Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Description : Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the ... Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Last Answer : (C) Heavy tonnages of rocks or gravel

Sticky material can be dried in a __________ dryer. (A) Tray (B) Rotary (C) Fluidised bed (D) None of these

Description : Sticky material can be dried in a __________ dryer. (A) Tray (B) Rotary (C) Fluidised bed (D) None of these

Last Answer : (A) Tray

__________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

Prilling of urea should be accomplished (in a sprayer) just above the melting point of urea with minimum of retention time, otherwise it will result in (A) Low bulk density product (B) Biuret formation (C) Non-spherical prills (D) Substantially wet non-flowing and sticky product

Description : Prilling of urea should be accomplished (in a sprayer) just above the melting point of urea with minimum of retention time, otherwise it will result in (A) Low bulk density product (B) Biuret formation (C) Non-spherical prills (D) Substantially wet non-flowing and sticky product

Last Answer : (B) Biuret formation

To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Description : To handle smaller quantity of fluid at higher discharge pressure, use a __________ pump. (A) Reciprocating (B) Centrifugal (C) Volute (D) Rotary vacuum

Last Answer : (A) Reciprocating

Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Description : Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Last Answer : (B) Large quantity of very fine

Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor.(A) Drag(B) Ribbon(C) Screw(D) Slat

Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat

Last Answer : (B) Ribbon

In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Description : In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Last Answer : (a) A Rotary kiln

Eyes are rising , what can be done to get better soon ? Boiling in the eyes and water coming. It hurts a lot when it tastes good..and the water flowing from the eyes dries up very quickly and the eyes become sticky..what will be better if you do it, please tell me a little bit, it is very difficult. .

Description : Eyes are rising , what can be done to get better soon ? Boiling in the eyes and water coming. It hurts a lot when it tastes good..and the water flowing from the eyes dries up very quickly and the eyes ... sticky..what will be better if you do it, please tell me a little bit, it is very difficult. .

Last Answer : Brother, please do not neglect this matter of eyes. First see a doctor in the medicine department and give eye drops and palsy. Do not stay up late. Do not close your eyes.

The process of passing water through beds of granular materials, is called (A) Screening (B) Sedimentation (C) Filtration (D) None of these

Description : The process of passing water through beds of granular materials, is called  (A) Screening  (B) Sedimentation  (C) Filtration  (D) None of these 

Last Answer : (C) Filtration 

Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Last Answer : (B) Suitable for sticky materials

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Wood is a/an __________ material. (A) Amorphous (B) Cellular (C) Homogeneous (D) Granular

Description : Wood is a/an __________ material. (A) Amorphous (B) Cellular (C) Homogeneous (D) Granular

Last Answer : (B) Cellular

How to handle this sticky situation?

Description : How to handle this sticky situation?

Last Answer : answer:“Oh. That’s a bit more than I can afford now, I appreciate your giving me an estimate.” And be careful who you ask in the future.

How would you handle this sticky situation in 1st year uni?

Description : How would you handle this sticky situation in 1st year uni?

Last Answer : answer:Welcome to Fluther! Since your parents are footing the bill, they need to know the truth. It's painful to have that discussion (trust me, I've been there), but it needs to be done. What I ... is that as disappointed as they were, the world didn't end. They helped me make the right decisions.

For which of the following materials, the output of power shovels for a fixed shovel size will be maximum (A) Moist loam (B) Good common earth (C) Well blasted rock (D) Wet sticky clay

Description : For which of the following materials, the output of power shovels for a fixed shovel size will be maximum (A) Moist loam (B) Good common earth (C) Well blasted rock (D) Wet sticky clay

Last Answer : (A) Moist loam

Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Description : Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Last Answer : (B) Filter thickener

The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and, showy

Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and, showy

Last Answer : (2) rough and sticky Explanation: Pollen grains are large sticky and heavy, usually with rough surfaces so that they can readily cling onto the insects bodies. They are sticky so that pollen grains settling on them are not easily displaced.

Large tilt angle is best for a. Hard soil b. Sticky and non scouring soil c. Dry and cemented soil d. None of these

Description : Large tilt angle is best for a. Hard soil b. Sticky and non scouring soil c. Dry and cemented soil d. None of these

Last Answer : b. Sticky and non scouring soil

.Large tilt angle best for a) Hard soil b) Sticky and non-scouring soil c) Dry and cemented soil d None of the above

Description : .Large tilt angle best for a) Hard soil b) Sticky and non-scouring soil c) Dry and cemented soil d None of the above

Last Answer : b) Sticky and non-scouring soil

The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and showy

Description : The pollen grains of flowers pollinated by insects are : (1) smooth and dry (2) rough and sticky (3) rough and dry (4) large and showy

Last Answer : rough and sticky

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Air-tech management learns that last month's production run of heaters is defective and announces a recall of the specific models produced. To handle the large number of products it expects to receive for replacement, Air -tech will probably need to add a __________ to its distribution network. A)distribution centre B)private warehouse C)dispatching shipment system D)public warehouse E)materials handling system

Description : Air-tech management learns that last month's production run of heaters is defective and announces a recall of the specific models produced. To handle the large number of products ... distribution centre B)private warehouse C)dispatching shipment system D)public warehouse E)materials handling system

Last Answer : D)public warehouse

Batch tray dryers suffers from the disadvantage of (A) High maintenance cost (B) Non-uniform & low production rate (C) High labour cost & low heat economy (D) All 'a', 'b' & 'c'

Description : Batch tray dryers suffers from the disadvantage of (A) High maintenance cost (B) Non-uniform & low production rate (C) High labour cost & low heat economy (D) All 'a', 'b' & 'c'

Last Answer : (C) High labour cost & low heat economy

Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Last Answer : (C) Screw

Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Description : Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Last Answer : (C) Steel or iron

To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Description : To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Last Answer : D

Mass flow of granular solid (M) through a circular opening of dia, D follows (A) M ∝ √D (B) M ∝ D2 (C) M ∝ D3 (D) M ∝ D

Description : Mass flow of granular solid (M) through a circular opening of dia, D follows (A) M ∝ √D (B) M ∝ D2 (C) M ∝ D3 (D) M ∝ D

Last Answer : (C) M ∝ D

Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Description : Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Last Answer : (B) Rod mill

Which of the following undergoes granular fracture? (A) Wrought iron (B) Steel (C) Cast iron (D) None of these

Description : Which of the following undergoes granular fracture? (A) Wrought iron (B) Steel (C) Cast iron (D) None of these

Last Answer : (B) Steel

Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Description : Hydrometer measures the specific gravity of liquids based on the principles of buoyancy. Pycnometer is used to measure the specific gravity of (A) Powder & granular solids (B) Liquids (C) Low melting point semi-solids (D) All 'a', 'b' & 'c

Last Answer : (D) All 'a', 'b' & 'c

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Description : The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Last Answer : (A) 1

__________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Description : __________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Last Answer : (C) Pressure filter thickener

For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Description : For classification of potable (drinking) water, we use a __________ filter. (A) Gravity sand (B) Plate and frame (C) Vacuum leaf (D) Rotary vacuum

Last Answer : (A) Gravity sand

For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea(C) Sand(D) Rotary vacuum

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Last Answer : (C) Centrifugal

Moore filter is a __________ filter. (A) Leaf (B) Press (C) Rotary (D) Sand

Description : Moore filter is a __________ filter. (A) Leaf (B) Press (C) Rotary (D) Sand

Last Answer : (A) Leaf

Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter(A) Filtering(B) Washing(C) Drying(D) All (A), (B) & (C).

Description : Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter. (A) Filtering (B) Washing (C) Drying (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The controlling resistance in a rotary drum vacuum filter is the __________ resistance.(A) Piping (B) Cake (C) Filter medium (D) None of these

Description : The controlling resistance in a rotary drum vacuum filter is the __________ resistance. (A) Piping (B) Cake (C) Filter medium (D) None of these

Last Answer : (B) Cake

The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Description : The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Last Answer : (B) Sand

Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Description : Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Last Answer : (B) 1/√μ

Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Description : Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Last Answer : (A) Rotary

Milk is dried usually in a __________ dryer. (A) Freeze (B) Spray (C) Tray (D) Rotary

Description : Milk is dried usually in a __________ dryer. (A) Freeze (B) Spray (C) Tray (D) Rotary

Last Answer : (B) Spray

Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Description : Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Last Answer : (D) Truck/tunnel

Paper industry employs __________ driers.(A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Description : Paper industry employs __________ driers. (A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Last Answer : (A) Cylinder