Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite
Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.
Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite
Last Answer : Nylon 66
Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8
Last Answer : Nylon-6,6
Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin
Last Answer : (B) Nylon-66
Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these
Last Answer : (B) Hexamethylene diamine and the adipic acid
Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid
Last Answer : (A) Caprolactam
Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol
Last Answer : (A) Adipic acid and Hexamethylene diamine
Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol
Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene
Last Answer : Phenol and formaldehyde
Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these
Last Answer : (D) None of these
Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these
Description : Teflon is prepared by the polymerization of (a) Butadiene (b) Vinyl cyanide (c) Vinyl chloride (d) Tetrafluoroethylene
Last Answer : Tetrafluoroethylene
Description : Which of the following compounds will give a white precipitate with alcoholic AgNO3? (a) Vinylbenzene (b) Chlorobenzene (c) Vinyl chloride (d) Allyl chloride
Last Answer : Allyl chloride
Description : Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine
Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these
Last Answer : (C) Diamine and the dibasic acid
Description : Orion is (A) A copolymer (B) A condensation polymer (C) Obtained by polymerising vinyl cyanide (D) All (A), (B) and (C)
Last Answer : (C) Obtained by polymerising vinyl cyanide
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite
Description : The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid
Last Answer : (C) Adipic acid
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit
Description : Orlon is prepared by the polymerisation of (a) Vinyl cyanide (b) Allyl alcohol (c) Vinyl chloride (d) Allyl chloride
Last Answer : Vinyl cyanide
Last Answer : Acrylonitrile.
Description : Which one of the following is used to make Teflon? (a) Fluoroethene (b) 1,1,4,4-tetrafluorobutadiene (c) 1,2-difluoroethene (d) Tetrafluoroethylene
Description : What is the common name of the substance which is inert to nearly all chemicals and is a polymer of tetrafluoroethylene?
Last Answer : ANSWER: TEFLON
Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum
Last Answer : Styrene
Description : Which of the following is not a carboxylic acid? (a) Malonic acid (b) Acetic acid (c) Picric acid (d) Adipic acid
Last Answer : Picric acid
Description : Ethyl acetoacetate undergoes acid-hydrolysis with dilute HCl to form (a) Acetoacetic acid (b) Succinic acid (c) Acetic acid (d) Adipic acid
Last Answer : Acetoacetic acid
Description : In adipic acid, HOOC(CH2)nCOOH, n is equal to (a) 1 (b) 2 (c) 3 (d) 4
Last Answer : 4
Description : Perspex can be used as a substitute of glass. Its monomer is (A) Methyl methacrylate (B) DMT (C) Butadiene (D) Tetrafluoroethylene
Last Answer : (A) Methyl methacrylate
Description : Poly Tetrafluoroethylene (P.T.F.E.) is known as (A) Bakelite (B) Teflon (C) Celluloid (D) Dacron
Last Answer : (B) Teflon
Description : PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene
Last Answer : (2) Vinyl chloride Explanation: Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride (17CM). Polyvinyl chloride, commonly abbreviated PVC, is the third-most widely produced ... it is cheaper and stronger than more traditional alternatives such as copper or ductile iron.
Description : The basic chemical building block of natural rubber obtained from trees is – (1) Isoprene (2) Vinyl Chloride (3) Acetylene (4) Neoprene
Last Answer : (1) Isoprene Explanation: Isoprene was first isolated by thermal decomposition of natural rubber. About 95% of isoprene production is used to produce cis-1,4- polyisoprene---a synthetic version of natural ... consists mainly of poly-cis-isoprene with a molecular weight of 100,000 to 1,000,000.
Description : The basic chemical building block of natural rubber obtained from trees is (1) Isoprene (2)Vinyl Chloride (3) Acetylene (4)Neoprene
Last Answer : Isoprene
Description : PVC is obtained by the polymerisation of (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene
Last Answer : Vinyl chloride
Description : Aspartate amino transferase uses the following for transamination: (A) Glutamic acid and pyruvic acid (B) Glutamic acid and oxaloacetic acid (C) Aspartic acid and pyruvic acid (D) aspartic acid and keto adipic acid
Last Answer : Answer : B
Description : The end product of omega-oxidation of fatty acids having an even number of carbon atoms is (A) Adipic acid (B) Suberic acid (C) Both (A) and (B) (D) None of these
Last Answer : Answer : C
Description : Which of the following does not give benzoic acid on hydrolysis? (1) phenyl cyanide (2) benzoyl chloride (3) benzyl chloride (4) methyl benzoate
Last Answer : (3) benzyl chloride Explanation: Hydrolysis is any chemical reaction in which a molecule of water ruptures one or more chemical bonds.
Description : Alkyl cyanide on reduction gives….. a. primary amine b. secondary amine c. amide d. carboxylic acid
Last Answer : a. primary amine
Description : A person having osteoporosis is suffering from lead poisoning. Ethlene diamine tetra acetic acid (EDTA) is administered for this condition. The best f
Last Answer : A person having osteoporosis is suffering from lead poisoning. Ethlene diamine tetra acetic acid (EDTA ... C. disodium salt D. calcium dihydrogen salt
Description : Which one of the following tests employs Ethylene Diamine Tetra Acetic Acid as a titrating agent? (a) Chlorides (b) Dissolved oxygen (c) Hardness (d) Residual chlorine
Last Answer : (c) Hardness
Description : An example of competitive inhibition of an enzyme is the inhibition of a. Succinic dehydrogenase by malonic acid b. Cytochrome oxidase by cyanide c. Hexokinase by glucose-6-phosphate d. Carbonic anhydrase by carbon dioxide
Last Answer : Ans: A
Description : For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) ... an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry
Last Answer : i) [Fe(en)2Cl2] Cl or x + 0 + 2 (-1) + (-1) = 0 x + (- 3) = 0 or x = + 3 ∴ Oxidation number of iron, x = + 3 (ii) The complex has two bidentate ligands and two ... )2Cl2] Cl, only cis-isomer shows optical isomerism. (vi) Name of complex: Dichloridobis (ethane-1, 2- diamine) Iron (III) chloride
Description : Using IUPAC norms write the formulae for the following: (a) Potassium trioxalatoaluminate (III) (b) Dichloridobis(ethane-l, 2-diamine) cobalt (III) -Chemistry
Last Answer : (a) K3[Al(C2O4)3] (b) [Co(Cl)2(en)2]+
Description : Using IUPAC norms write the formulae for the following: (a) Tris(ethane-1,2-diamine) chromium (III) chloride (b) Potassium tetrahydroxozincate(II) -Chemistry
Last Answer : a) [Cr(en)3] Cl3 (b) K2[Zn(OH)4]
Description : Name the following coordination compounds according to IUPAC system of nomenclature :(i) [Co(NH3)4 (H2O)Cl]Cl2 (ii) [CrCl2(en)2]Cl, (en = ethane – 1, 2 – diamine) -Chemistry
Last Answer : (i) [CO(NH3)4 (H2O)Cl]Cl2 Tetraammine aquachlorido cobalt (III) chloride (ii) [CrCl2(en)2]Cl Dichlorobis (ethane-1, 2-diamine) chromium (III) chloride
Description : Denticity of Ethylene diamine ligand is? a) Six b) Two c) Three d) Four
Last Answer : a) Six
Description : Ethylene diamine tetraacetoacetate (pron: te-tra-a-see-tow-AS-e-tate) (EDTW) is often used for which of the following: w) Determine hardness of water x) Measure the amount of zinc in a solution. y) A preservative in foods z) All of the above
Last Answer : ANSWER: Z -- ALL OF THE ABOVE
Description : Nylon-66 is obtained from:
Last Answer : Nylon-66 is obtained from: A. Hexamethylene diamine and adipic acid B. Phenol and formaldehyde C. ... and adipic acid D. Adipic acid and phthalic acid
Description : Write an equation for the Chemistry involved when a drop of hydrochloric acid make a hole in nylon stockings.
Last Answer : Ans. The (— CO — NH —) amide bond in nylon gets hydrolysed.
Description : An organic base (X) reacts with nitrous acid at `0^(@)C` to give a clear solution. Heating the solution with KCN and cuprous cyanide followed by conti
Last Answer : An organic base (X) reacts with nitrous acid at `0^(@)C` to give a clear solution. Heating the solution with ... solid. "X" is : A. B. C. D.