The chemical used in enabalining biological materials is – (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde

The chemical used in enabalining biological materials is – (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde
by

1 Answer

Answer :

(1) formaldehyde in water Explanation: Embalming fluids use formaldehyde as a preservative. Formaldehyde is the simplest aldehyde with the chemical formula HCHO. Formalin is a solution of formaldehyde in water, usually with a small amount of methanol added. Modern formaldehyde based embalming fluids are much kinder to the environment than those used in previous years.
by
selected

Related questions

The chemical used in embalming biological materials is (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde

Description : The chemical used in embalming biological materials is (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde

Last Answer : formaldehyde in water

Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Last Answer : Phenol and formaldehyde

Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde(c) Acetic acid(d) Acetaldehyde

Description : Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde (c) Acetic acid (d) Acetaldehyde

Last Answer : Formic acid

Which of the following is a specific inhibitor of the enzyme alcohol dehydrogenase and is useful in the treatment of methanol poisoning: A. Disulfiram B. Ethylene glycol C. Calcium leucovorin D. Fomepizole

Description : Which of the following is a specific inhibitor of the enzyme alcohol dehydrogenase and is useful in the treatment of methanol poisoning: A. Disulfiram B. Ethylene glycol C. Calcium leucovorin D. Fomepizole

Last Answer : D. Fomepizole

(3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is an odorless, colourless, syrupy, sweettasting liquid. Ethylene glycol is toxic, and ingestion can result in death. Due to its low freezing point ethylene glycol resists freezing. A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Description : (3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is ... A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Last Answer : Rust is - (1) A mixture of Fe₂O₃ and Fe(OH) ₂ (2) A mixture of FeO and Fe(OH)₂ (3) FeO only (4) A mixture of Fe₂O₃, 3H₂O and FeO

Which of the following compounds is least soluble in water? (a) Glycerol (b) Ethyl alcohol (c) Ethylene glycol (d) Ethyl chloride

Description : Which of the following compounds is least soluble in water? (a) Glycerol (b) Ethyl alcohol (c) Ethylene glycol (d) Ethyl chloride

Last Answer : Ethyl chloride

In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Description : In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Last Answer : Lower the freezing point

The product of the reaction of ethylene oxide with acidic methanol is (a) CH3OCH2CH2OH (b) CH3CH2CH2CH2OH (c) HOCH2CH2OH (d) CH3CH2OCH2CH3

Description : The product of the reaction of ethylene oxide with acidic methanol is (a) CH3OCH2CH2OH (b) CH3CH2CH2CH2OH (c) HOCH2CH2OH (d) CH3CH2OCH2CH3

Last Answer : CH3OCH2CH2OH

Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.

Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Description : Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.

Last Answer : Sulfur.

The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Last Answer : Styrene

Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Description : Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon

Last Answer : Dacron

Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone

Description : Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone

Last Answer : Acetic acid

Ethylene oxide reacts with HBr to give (a) 1-Bromoethanol (b) Ethyl bromide (c) 2-Bromoethanol (c) Ethylene glycol

Description : Ethylene oxide reacts with HBr to give (a) 1-Bromoethanol (b) Ethyl bromide (c) 2-Bromoethanol (c) Ethylene glycol

Last Answer : 2-Bromoethanol

Ethylene reacts with oxygen in the presence of silver catalyst at 300°C to form (a) Diethyl ether (b) Ethylene glycol (c) Ethyl alcoho(d) Ethylene oxidel

Description : Ethylene reacts with oxygen in the presence of silver catalyst at 300°C to form (a) Diethyl ether (b) Ethylene glycol (c) Ethyl alcohol (d) Ethylene oxide

Last Answer : Ethylene oxide

Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Description : Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles

Last Answer : Methyl alcohol is produced by fermentation of sugars

Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid

Description : Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid

Last Answer : Ethylene glycol

When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Description : When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Last Answer : Oxalic acid

Ethylene glycol reacts with excess of PCl5 to give (a) Chloroethane (b) 1,2-Dichloroethane (c) Hexachloroethane (d) 1,3-Dichloroethane

Description : Ethylene glycol reacts with excess of PCl5 to give (a) Chloroethane (b) 1,2-Dichloroethane (c) Hexachloroethane (d) 1,3-Dichloroethane

Last Answer : 1,2-Dichloroethane

Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Description : Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Last Answer : Ethylene glycol

Chemically, fats are esters of long carbon-chain acids and which of the following: w) ethanol x) glycerol y) ethylene glycol z) sodium hydroxide

Description : Chemically, fats are esters of long carbon-chain acids and which of the following: w) ethanol x) glycerol y) ethylene glycol z) sodium hydroxide

Last Answer : ANSWER: X -- GLYCEROL

Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : Terephthalic acid

Which of the following compounds will react with methylmagnesium iodide followed by acid-hydrolysis to give ethyl alcohol? (a) Ethylene (b) Acetaldehyde (c) Formaldehyde (d) Acetone

Description : Which of the following compounds will react with methylmagnesium iodide followed by acid-hydrolysis to give ethyl alcohol? (a) Ethylene (b) Acetaldehyde (c) Formaldehyde (d) Acetone

Last Answer : Formaldehyde

For the gaseous phase chemical reaction, C2H4(g) + H2O(g) ↔ C2H5OH(g), the equilibrium conversion does not depend on the (A) Steam to ethylene ratio (B) Temperature (C) Pressure (D) None of these

Description : For the gaseous phase chemical reaction, C2H4(g) + H2O(g) ↔ C2H5OH(g), the equilibrium conversion does not depend on the (A) Steam to ethylene ratio (B) Temperature (C) Pressure (D) None of these

Last Answer : (D) None of these

A typical example of an exothermic reversible reaction conducted at high pressure in industry is (A) Dehydration of ethanol (B) Methanol synthesis (C) Reformation of methane (D) Polymerisation of ethylene

Description : A typical example of an exothermic reversible reaction conducted at high pressure in industry is (A) Dehydration of ethanol (B) Methanol synthesis (C) Reformation of methane (D) Polymerisation of ethylene

Last Answer : (A) Dehydration of ethanol

Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields

Description : Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields

Last Answer : Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields A. Ethanal B. Ethylene oxide C. Dioxane D. Diethylene glycol

Which IMF is the strongest in Ethylene Glycol (HOCH2CH2OH)?

Description : Which IMF is the strongest in Ethylene Glycol (HOCH2CH2OH)?

Last Answer : These are hydrogen bonds and dispersion forces.

Ethylene glycol test?

Description : Ethylene glycol test?

Last Answer : DefinitionEthylene glycol is a colorless, odorless, sweet-tasting but poisonous type of alcohol found in many household products. People sometimes drink ethylene glycol mistakenly or on purpose as a substitute ... into an airtight vial or tube attached to the needle. The elastic band is removed f

Ethylene glycol intoxication?

Description : Ethylene glycol intoxication?

Last Answer : DefinitionEthylene glycol is a colorless, odorless, sweet-tasting chemical found in many household products, including antifreeze, deicing products, detergents, paints, and cosmetics. It is poisonous if ... (ethanol).SymptomsThe first symptom of ethylene glycol ingestion is similar to the feeling ca

Vitamin required for metabolism of diols e.g. conversion of ethylene glycol to acetaldehyde is (A) Thiamin (B) Cobalamin (C) Pyridoxine (D) Folic acid

Description : Vitamin required for metabolism of diols e.g. conversion of ethylene glycol to acetaldehyde is (A) Thiamin (B) Cobalamin (C) Pyridoxine (D) Folic acid

Last Answer : Answer : B

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Last Answer : (A) Ethylene glycol

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index is 4.5, the volume fraction of solids in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Last Answer : (C) 0.6

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Last Answer : (D) None of these

Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Description : Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Last Answer : Ethylene glycol

Which of the following is an example of biological fluid? A. Ethanol B. Water C. Methanol D. Saliva

Description : Which of the following is an example of biological fluid? A. Ethanol B. Water C. Methanol D. Saliva

Last Answer : D. Saliva

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Last Answer : (C) Poly tetra-fluoro-ethylene (P.T.F.E.)

Royce Sachet is suitable indicator for _ _ _ _ _ _ _ _ A Formaldehyde B Β-propiolactone C Isopropyl alcohol D Ethylene oxide

Description : Royce Sachet is suitable indicator for _ _ _ _ _ _ _ _ A Formaldehyde B Β-propiolactone C Isopropyl alcohol D Ethylene oxide

Last Answer : D Ethylene oxide

The substance whose chemical formula is CH3OH is known as w) carbonated water x) grain alcohol y) potable alcohol z) methanol

Description : The substance whose chemical formula is CH3OH is known as w) carbonated water x) grain alcohol y) potable alcohol z) methanol

Last Answer : ANSWER: Z -- METHANOL

Discuss in brief gaseous sterilization using ethylene oxide.

Description : Discuss in brief gaseous sterilization using ethylene oxide. 

Last Answer : Gaseous sterilization using Ethylene oxide:  It is gas at room temperature, highly inflammable & forms explosive mixture with air. This disadvantage can be overcome by using mixture of 10% ethylene ... toxic & inflammable gas. Sophisticated instruments are required & skilled persons are needed.

Chemical name of vinegar is - (1) Acetone (2) Acetic acid (3) Formaldehyde (4) Ethanol

Description : Chemical name of vinegar is - (1) Acetone (2) Acetic acid (3) Formaldehyde (4) Ethanol

Last Answer : (2) Acetic acid Explanation: Vinegar is roughly 3-9% acetic acid CH3COOH) by volume, making acetic acid the main component of vinegar apart from water. The acetic acid is produced by the fermentation of ethanol by acetic acid bacteria. Vinegar is mainly used as a cooking ingredient, or in pickling.

Chemical name of vinegar is (1) Acetone (2) Acetic acid (3) Formaldehyde (4) Ethanol

Description : Chemical name of vinegar is (1) Acetone (2) Acetic acid (3) Formaldehyde (4) Ethanol

Last Answer : Acetic acid

What are the methods of treatment & disposal of radioactive wastes? (A) Evaporation & chemical precipitation (B) Biological methods & adsorption in ion exchange materials (C) Fixing into a solid mass with cement and sinking deep in the sea (D) All (A), (B) & (C)

Description : What are the methods of treatment & disposal of radioactive wastes? (A) Evaporation & chemical precipitation (B) Biological methods & adsorption in ion exchange materials (C) Fixing into a solid mass with cement and sinking deep in the sea (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)