Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Multistage catalytic converter is not used in the
(A) Conversion of SO2
to SO3
(B) NH3 synthesis reaction
(C) Both (A) and (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(B) NH3 synthesis reaction
by

Related questions

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Description : The catalytic converter for conversion of SO2 to SO3 by contact process should have a feed with SO2 content between (A) 2-5 % (B) 7-10 % (C) 12-15 % (D) 20-25 %

Last Answer : (B) 7-10 %

Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Description : Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Last Answer : (C) 98

Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating sulphuric acid with sulphur trioxide (C) Vitriol oil is nothing but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Description : Pick out the wrong statement. (A) Conversion of SO2 to SO3 in Monsanto-4 pass converter is about 98% (B) The chemical formula of oleum is H2S2O7 , which is formed by saturating ... but technical sulphuric acid (D) Decomposition of sulphuric acid on heating does not start before its boiling

Last Answer : (D) Decomposition of sulphuric acid on heating does not start before its boiling

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Description : Which of the following pollutants is absent in the emissions from a fertiliser plant? (A) SO2 & SO3 (B) NO2 (C) NH3 (D) CO

Last Answer : (D) CO

. Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Description : . Bromides contained in hot mother liquor is treated with __________ during manufacture of bromine from sea water. (A) SO3 (B) Cl2 (C) NH3 (D) SO2

Last Answer : (B) Cl2

. Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic

Description : . Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic

Last Answer : (B) Converts CO to CO2 with steam

For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Description : For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Last Answer : (C) Both (B) and (C)

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Description : During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased

Last Answer : (D) Temperature is reduced and pressure is increased

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio of SO2 to air. (A) (i) increases (ii) decreases (B) (i) decreases (ii) increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Description : In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio ... increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases

Last Answer : (B) (i) decreases (ii) increases

KOH solution used in Orsat apparatus absorbs (A) CO2 (B) SO2 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : KOH solution used in Orsat apparatus absorbs (A) CO2 (B) SO2 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) and (B)

Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, CO2 & SO2

Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, SO2 & H2S

If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 (as per Le Chatelier's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Description : 10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4

Last Answer : (C) SO3

More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Last Answer : (B) H2SO4

Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Description : Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Last Answer : (C) SO3

At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P(D) 1/P

Description : At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P (D) 1/P

Last Answer : (B) √P

Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Description : Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Last Answer : (B) Exothermic

Fauser Montecatini converter is used for (A) Ammonia synthesis (e.g. at FCI Sindri, India) (B) Methanation of CO and CO2 (C) Shift conversion (i.e. CO to CO2 ) (D) None of these

Description : Fauser Montecatini converter is used for (A) Ammonia synthesis (e.g. at FCI Sindri, India) (B) Methanation of CO and CO2 (C) Shift conversion (i.e. CO to CO2 ) (D) None of these

Last Answer : (A) Ammonia synthesis (e.g. at FCI Sindri, India)

How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Description : How would the equilibrium change if NO2 were added to SO2(g)+NO2(g)=NO(g)+SO3(g)+heat?

Last Answer : The amount of NO and SO3 would increased.

Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Mark the compound which possesses ionic, covalent and coordinate bonds. (1) NH4C1 (2) SO3 (3) SO2 (4) H2O

Description : Mark the compound which possesses ionic, covalent and coordinate bonds. (1) NH4C1 (2) SO3 (3) SO2 (4) H2O

Last Answer : (1) NH4C1 Explanation: Ammonium chloride (NH4Cl) is generally considered as an ionic compound but this compound has three different types of bond.

Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2

Description : Acid rain is due to increase in atmospheric  concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2

Last Answer : (d) SO2 and NO2.

Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2.

Description : Acid rain is due to increase in atmospheric concentration of (a) ozone and dust (b) CO2 and CO (c) SO3 and CO (d) SO2 and NO2.

Last Answer : (d) SO2 and NO2.

Acid rain is caused by increase in the atmospheric concentration of (a) CO2 and CO (b) O3 and dust (c) SO2 and NO2 (d) SO3 and CO.

Description : Acid rain is caused by increase in the atmospheric concentration of (a) CO2 and CO (b) O3 and dust (c) SO2 and NO2 (d) SO3 and CO.

Last Answer : (c) SO2 and NO2

. Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Description : Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C

Last Answer : SO3 in pyridine at 100°C

When conc. H2 SO4 is added to dry KNO3 , brown fumes are evolved. These fumes are due to (1) SO3 (2) SO2 (3) NO2 (4) N2O

Description : When conc. H2 SO4 is added to dry KNO3 , brown fumes are evolved. These fumes are due to (1) SO3 (2) SO2 (3) NO2 (4) N2O

Last Answer : NO2

In the ammonia synthesis reaction, N2 + 3H2 ⇌ 2NH3 + 22.4 kcal, the formation of NH3 will be favoured by (A) High temperature (B) Low pressure (C) Low temperature only (D) Both low temperature and high pressure

Description : In the ammonia synthesis reaction, N2 + 3H2 ⇌ 2NH3 + 22.4 kcal, the formation of NH3 will be favoured by (A) High temperature (B) Low pressure (C) Low temperature only (D) Both low temperature and high pressure

Last Answer : (D) Both low temperature and high pressure

Non-catalytic fluid-solid reactions are represented by __________ model. (A) Continuous reaction (B) Unreacted core (C) Both (A) and (B) (D) Neither (A) and (B)

Description : Non-catalytic fluid-solid reactions are represented by __________ model. (A) Continuous reaction (B) Unreacted core (C) Both (A) and (B) (D) Neither (A) and (B)

Last Answer : (C) Both (A) and (B)

Which is not a refrigerant? (A) SO2 (B) NH3 (C) CCl2F2 (D) C2H4Cl2

Description : Which is not a refrigerant? (A) SO2 (B) NH3 (C) CCl2F2 (D) C2H4Cl2

Last Answer : (D) C2H4Cl2

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (C) Chemical reaction

For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Description : Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Last Answer : (B) Exothermic

Major gaseous pollutant of the thermal power station is – (1) H2S (2) NH3 (3) NO2 (4) SO2

Description : Major gaseous pollutant of the thermal power station is – (1) H2S (2) NH3 (3) NO2 (4) SO2

Last Answer : (4) SO2 Explanation: A flue-gas stack is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air ... CO2) and water vapor as well as nitrogen and excess oxygen remaining from the intake combustion air.

Suggest the expected shape of the following molecules with reasons a.SO2 b.NH3

Description : Suggest the expected shape of the following molecules with reasons a.SO2 b.NH3

Last Answer : Ans.(a) In SO2 molecule there are three electron pairs .the three electron pairs should acquire trigonal planar arrangement with bond angle 120 ° .Since one of the position is occupied by lone pair the geometry ... to 107 ^0 from 109.5^ 0 and hence the geometry of ammonia is regarded as pryamidal.

Acid rains are produced by (a) excess NO2 and SO2 from burning fossil fuels (b) excess production of NH3 by industry and coal gas (c) excess release of carbon monoxide by incomplete combustion (d) excess formation of CO2 by combustion and animal respiration.

Description : Acid rains are produced by (a) excess NO2 and SO2 from burning fossil fuels (b) excess production of NH3 by industry and coal  gas (c) excess release of carbon monoxide by incomplete  combustion (d) excess formation of CO2 by combustion and  animal respiration.

Last Answer : (a) excess NO2 and SO2 from burning fossil fuels