Which is used as a coolant in nuclear reactor due to its high capture cross-section? (A) H2 (B) N2 (C) He (D) CO2

Which is used as a coolant in nuclear reactor due to its high capture
cross-section?
(A) H2
(B) N2
(C) He
(D) CO2
by

1 Answer

Answer :

(A) H2
by

Related questions

Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Description : Which of the following gases has very high neutron capture cross￾section, making it unsuitable as a coolant in nuclear reactor? (A) N2 (B) He (C) CO2 (D) H2

Last Answer : (A) N2

H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Description : H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Last Answer : (B) Higher specific heat

__________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Description : __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. (A) Nitrogen (B) Hydrogen (C) Helium (D) Carbon dioxide

Last Answer : (A) Nitrogen

Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate (C) Has a better heat transfer characteristics, and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Description : Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate ... , and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Description : Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is __________ kgf/cm2 . (A) 0.2 (B) 7 (C) 35 (D) 50

Last Answer : (B) 7

__________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2(C) CO2(D) He

Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He

Last Answer : (A) N2

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor(C) Cannot use coking coal(D) Operate at very high pressure

Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure

Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )

Green house gases blanket/block the infrared radiation from earth's surface to the atmosphere leading to its progressive warming up. Which of the following gases does not exhibit green house effect? (A) CO2 (B) H2 (C) SO3 (D) N2

Description : Green house gases blanket/block the infrared radiation from earth's surface to the atmosphere leading to its progressive warming up. Which of the following gases does not exhibit green house effect? (A) CO2 (B) H2 (C) SO3 (D) N2

Last Answer : (C) SO3

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Description : The calorific value of a gas of composition CO2 = 20%, H2 = 50%, CH4 = 30%, is y. If the composition of gas is changed to H2 = 50%, CH4 = 30%, CO2 = 10%, N2 = 10%, then the calorific value will be (A) y (B) 0.95 y (C) 1.05 y (D) 1.8 y

Last Answer : (A) y

. Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Description : . Water gas constitutes mainly of (A) CO & H2 (B) CO & N2 (C) CO2 & H2 (D) CH4 & H2

Last Answer : (A) CO & H2

Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Description : Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2

Last Answer : (A) N2

Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Description : Producer gas comprises mainly of (A) CO & N2 (B) CO & H2 (C) CO2 & N2 (D) CO2 & H2

Last Answer : (A) CO & N2

Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Description : Main constituents of purified Lurgi gas are (A) H2 , CmHn & CO2 (B) CO, H2 & CH4 (C) CO2 , O2 & CO (D) N2 , H2 & CO2

Last Answer : (B) CO, H2 & CH4

Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Description : Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2

Last Answer : (C) N2 & CO

Main component of sewage gas produced during anaerobic decomposition of organic waste (by suitable bacteria) during sewage disposal is (A) H2 (B) CH4 (C) CO2 (D) N2

Description : Main component of sewage gas produced during anaerobic decomposition of organic waste (by suitable bacteria) during sewage disposal is (A) H2 (B) CH4 (C) CO2 (D) N2

Last Answer : (B) CH4

Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Description : Raw materials for urea production are (A) CO2 and N2 (B) CO2 , H2 and N2 (C) NH3 and CO (D) HNO3 and CaCO3

Last Answer : (B) CO2 , H2 and N2

The essential ingredient of all the synthesis gas is (A) H2 (B) O2 (C) CO2 (D) N2

Description : The essential ingredient of all the synthesis gas is (A) H2 (B) O2 (C) CO2 (D) N2

Last Answer : (A) H

. Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic

Description : . Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic

Last Answer : (B) Converts CO to CO2 with steam

Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Description : Synthesis gas' meant for the synthesis of organic compound is a variable mixture of (A) N2 & H2 (B) CO2 & H2 (C) CO & H2 (D) C & H2

Last Answer : (C) CO & H2

Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Description : Producer gas consists mainly of (A) CO, CO2 N2 , H2 (B) CO, H2 (C) H2 , CH4 (D) C2H2 , CO2 , H2

Last Answer : (A) CO, CO2 N2 , H2

Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Description : Synthesis gas is a mixture of (A) CO and H2 (B) N2 and H2 (C) H2 , CH4 and CO (D) CO2 and H2

Last Answer : (A) CO and H2

Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damageB) Absorb the fast neutrons(C) Slow down the secondary neutrons(D) Protect the fuel element from coming in contact with the coolant

Description : Thermal shield is used in high powered nuclear reactors to (A) Protect the walls of the reactor from radiation damage B) Absorb the fast neutrons (C) Slow down the secondary neutrons (D) Protect the fuel element from coming in contact with the coolant

Last Answer : (A) Protect the walls of the reactor from radiation damage

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Description : Producer gas is a mixture of (a) CO and H2 (b) CO and N2 (c) CH4 and H2 (d) CO2 and H2

Last Answer : Ans:(a)

All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Description : All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Last Answer : (B) H2

Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Description : Water gas is a mixture of (A) CO2 and O2 (B) O2 and H2 (C) H2, N2 and O2 (D) CO, N2 and H2.

Last Answer : CO, N2 and H2.

A green house gas is a) H2 b) CO c) CO2 d) N2.

Description : A green house gas is a) H2 b) CO c) CO2 d) N2.

Last Answer : c) CO2

Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Description : Heavy water (D2O) in a nuclear reactor serves as a (A) Coolant (B) Moderator (C) Both (A) & (B) (D) Neutron absorber

Last Answer : (C) Both (A) & (B)

In a homogeneous nuclear reactor, the __________ are mixed together. (A) Fuel & coolant (B) Fuel & moderator (C) Coolant & moderator (D) None of these

Description : In a homogeneous nuclear reactor, the __________ are mixed together. (A) Fuel & coolant (B) Fuel & moderator (C) Coolant & moderator (D) None of these

Last Answer : (B) Fuel & moderator

A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Description : A homogeneous reactor is the one, in which the (A) Fissile atoms are evenly distributed throughout the mass of nuclear reactor (B) Same substance (e.g. heavy water) is used as moderator & coolant (C) The fuel and the moderator is mixed to form a homogeneous material (D) All (A), (B) and (C)

Last Answer : (C) The fuel and the moderator is mixed to form a homogeneous material

Light water' used as a coolant in nuclear reactor is nothing but (A) Ordinary water (B) Mildly acidic (pH = 6) water (C) Mildly alkaline (pH = 8) water (D) None of these

Description : Light water' used as a coolant in nuclear reactor is nothing but (A) Ordinary water (B) Mildly acidic (pH = 6) water (C) Mildly alkaline (pH = 8) water (D) None of these

Last Answer : (A) Ordinary water

Name the chemical element that is eleventh in the Lanthanide Series in the periodic table. Because of the metal's high thermal-neutron-absorption cross section, it has been of much interest in terms of use in nuclear reactor hardware. The chemical symbol for this element is Er.

Description : Name the chemical element that is eleventh in the Lanthanide Series in the periodic table. Because of the metal's high thermal-neutron-absorption cross section, it has been of much interest in terms of use in nuclear reactor hardware. The chemical symbol for this element is Er.

Last Answer : ANSWER: ERBIUM

In nuclear reactor, heavy water is used as – (1) coolant (2) fuel (3) moderator (4) atomic smasher

Description : In nuclear reactor, heavy water is used as – (1) coolant (2) fuel (3) moderator (4) atomic smasher

Last Answer : (3) moderator Explanation: Heavy water is used in certain types of nuclear reactors where it acts as a neutron moderator to slow down neutrons so that they are more likely to react with ... do not require uranium enrichment, heavy water reactors are of concern in regards to nuclear proliferation.

Which nuclear reactor uses water as a coolant, moderator and reflector ?

Description : Which nuclear reactor uses water as a coolant, moderator and reflector ?

Last Answer : Pressurised water reactor.

Heavy water used as a coolant in nuclear reactor. Heavy Water is:

Description : Heavy water used as a coolant in nuclear reactor. Heavy Water is:

Last Answer : Water containing heavy Isotopes of Hydrogen atom

Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Description : Reactors in commercial nuclear power plants in the U.S. are often referred to as thermal reactors. A thermal reactor uses: w) fissionable plutonium-239 as fuel. x) a relatively low heat output. y) neutrons moderated to relatively low energies. z) liquid sodium as a coolant.

Last Answer : ANSWER: Y -- NEUTRONS MODERATED TO RELATIVELY LOW ENERGIES.

The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Description : The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Last Answer : ANSWER: Y -- COOLING TOWER

In nuclear reactor, heavy water is used as (1) coolant (2) fuel (3) moderator (4) atomic smasher

Description : In nuclear reactor, heavy water is used as (1) coolant (2) fuel (3) moderator (4) atomic smasher

Last Answer : moderator

Most of the new atoms formed when atoms in a nuclear reactor capture neutrons without fissioning are: w) fission products x) activation products y) actinides z) lead isotopes

Description : Most of the new atoms formed when atoms in a nuclear reactor capture neutrons without fissioning are: w) fission products x) activation products y) actinides z) lead isotopes

Last Answer : ANSWER: Y -- ACTINIDES

Which of the following behaves most closely like an ideal gas? (A) He (B) N2 (C) O2 (D) H2

Description : Which of the following behaves most closely like an ideal gas? (A) He (B) N2 (C) O2 (D) H2

Last Answer : (A) He

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

Which of the following gases will effuse out of football bladder most wieldy? (1) He (2) H2 (3) N2 (4) 02

Description : Which of the following gases will effuse out of football bladder most wieldy? (1) He (2) H2 (3) N2 (4) 02

Last Answer : (2) H2 Explanation: Hydrogen is a chemical element with symbol H and atomic number 1. With an average atomic weight of 1.00794 u (1.007825 u for hydrogen-1), hydrogen is the lightest ... forms covalent compounds with most elements and is present in the-water molecule and in most organic compounds.

Which of the following gases will effuse out of football bladder most quickly ? (1) He (2) H2 (3) N2 (4) O2

Description : Which of the following gases will effuse out of football bladder most quickly ? (1) He (2) H2 (3) N2 (4) O2

Last Answer :  H2

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core(C) Lowering the coolant circulation pressure(D) Avoiding the mixing of water with radioactive sodium, as it may causeexplosion

Description : Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for (A) Achieving high degree of superheat in the steam (B) Faster heat removal rate from the core (C) ... circulation pressure (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Last Answer : (D) Avoiding the mixing of water with radioactive sodium, as it may cause explosion

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate