What is the Thiele modulus of the solid catalysed first order reaction as shown in the bellow figure, if the pore diffusion offers negligible resistance to reaction? (A) < 5 (B) < 0.5(C) > 1 (D) 5

What is the Thiele modulus of the solid catalysed first order reaction as
shown in the bellow figure, if the pore diffusion offers negligible resistance
to reaction?
(A) < 5
(B) < 0.5
(C) > 1
(D) 5
by

1 Answer

Answer :

(B) < 0.5
by

Related questions

If Thiele modulus is __________, then the pore diffusion resistance in a catalyst may be considered as negligible. (A) 0 (B) ∞ (C) < 0.5 (D) > 0.5

Description : If Thiele modulus is __________, then the pore diffusion resistance in a catalyst may be considered as negligible. (A) 0 (B) ∞ (C) < 0.5 (D) > 0.5

Last Answer : (C) < 0.5

The effectiveness factor for large value of Thiele modulus [L√(K/D1 )] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2 /second). (A) L √(K/D1 ) (B) 1/[L√(K/D1 )] (C) 1 (D) ∞

Description : The effectiveness factor for large value of Thiele modulus [L√(K/D1 )] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2 /second). (A) L √(K/D1 ) (B) 1/[L√(K/D1 )] (C) 1 (D) ∞

Last Answer : (B) 1/[L√(K/D1 )]

Effectiveness factor (E) of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) (A) tan hT/T (B) tan T/T(C) tan hT/tan T(D) None of these

Description : Effectiveness factor (E) of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) (A) tan hT/T (B) tan T/T (C) tan hT/tan T (D) None of these

Last Answer : (A) tan hT/T

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA

For a first order chemical reaction in a porous catalyst, the Thiele modulus is 10. The effectiveness factor is approximately equal to (A) 0 (B) 1 (C) 0.1 (D) 0.5

Description : For a first order chemical reaction in a porous catalyst, the Thiele modulus is 10. The effectiveness factor is approximately equal to (A) 0 (B) 1 (C) 0.1 (D) 0.5

Last Answer : (C) 0.1

Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction?(A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Description : Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction? (A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Last Answer : (A) Ash resistance

The order of the chemical reaction as shown in the bellow figure, whose rate equation is given as -rA = KCA 2 . CB is (A) 0 (B) 1 (C) 2 (D) 3

Description : The order of the chemical reaction as shown in the bellow figure, whose rate equation is given as -rA = KCA 2 . CB is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

In solid catalysed reactions the diffusional effects are more likely to affect the overall rate of reaction for (A) Fast reactions in catalyst of small pore diameter (B) Fast reaction in catalyst of large pore diameter (C) Slow reactions in catalyst of small pore diameter (D) Slow reactions in catalyst of large pore diameter

Description : In solid catalysed reactions the diffusional effects are more likely to affect the overall rate of reaction for (A) Fast reactions in catalyst of small pore diameter (B) Fast reaction in catalyst ... reactions in catalyst of small pore diameter (D) Slow reactions in catalyst of large pore diameter

Last Answer : (C) Slow reactions in catalyst of small pore diameter

For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Description : For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Last Answer : (A) Zero

For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A(A) Zero(B) First(C) Second(D) Third.

Description : For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A. (A) Zero (B) First (C) Second (D) Third

Last Answer : (B) First

In a chemical reaction as shown in the bellow figure, it is observed that the (i) Rate of formation of 'P' is doubled on doubling the concentration of 'X' (ii) Rate of formation of 'P' is quadrupled on doubling the concentration of 'Y(iii) Doubling the concentration of 'Z' does not affect the rate of formation of 'P' What is the order of the above chemical reaction?(A) Zeroth order (B) First order (C) Second order (D) Third order

Description : In a chemical reaction as shown in the bellow figure, it is observed that the (i) Rate of formation of 'P' is doubled on doubling the concentration of 'X' (ii) Rate of formation of 'P' is quadrupled ... of the above chemical reaction? (A) Zeroth order (B) First order (C) Second order (D) Third order

Last Answer : (D) Third order

Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Description : Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Last Answer : (B) Exponentially

What is the order of chemical reaction as shown in the bellow figure, if it is found that the reaction rate doubles on doubling the concentration of B and also the reaction rate doubles when the concentrations of both A & B were doubled and quadrupled when the concentrations of both B & C were doubled? (A) 1 (B) 2 (C) 3 (D) 4

Description : What is the order of chemical reaction as shown in the bellow figure, if it is found that the reaction rate doubles on doubling the concentration of B and also the reaction rate doubles when the concentrations of both A & B ... the concentrations of both B & C were doubled? (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (B) 2

For the reaction as shown in the bellow figure, the rate of formation of Z is 0.2 gm mole/litre.hr. What is the rate of disappearance of X in gm mole/litre.hr? (A) 0.4 (B) 0.1 (C) 0.2 (D) None of these

Description : For the reaction as shown in the bellow figure, the rate of formation of Z is 0.2 gm mole/litre.hr. What is the rate of disappearance of X in gm mole/litre.hr? (A) 0.4 (B) 0.1 (C) 0.2 (D) None of these

Last Answer : (A) 0.4

Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Description : Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Last Answer : (B) Film diffusion

If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Description : If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Last Answer : (A) Film

A consecutive reaction, as shown in the bellow figure, is characterised by(A) Maxima in the concentration of A(B) Maxima in the concentration of B(C) Maxima in the concentration of C(D) High exothermicity

Description : A consecutive reaction, as shown in the bellow figure, is characterised by. (A) Maxima in the concentration of A (B) Maxima in the concentration of B (C) Maxima in the concentration of C (D) High exothermicity

Last Answer : (B) Maxima in the concentration of B

The equilibrium constant for the reversible reaction as shown in the bellow figure, is affected by the (A) Temperature of the system (B) Presence or absence of inerts (C) Pressure of the system (D) Kinetics of the reaction

Description : The equilibrium constant for the reversible reaction as shown in the bellow figure, is affected by the (A) Temperature of the system (B) Presence or absence of inerts (C) Pressure of the system (D) Kinetics of the reaction

Last Answer : (C) Pressure of the system

Which of the following holds good for an elementary reaction as shown in the bellow figure? (A) The rate of disappearance of 'Y' is equal to the rate of appearance of 'Z' (B) The rate of disappearance of 'Y' is equal to the rate of disappearance ofX'(C) Three times the rate of disappearance of 'X' is equal to the rate ofappearance of 'Z'(D) The rate of disappearance of 'X' is equal to the rate of appearance of 'Z

Description : Which of the following holds good for an elementary reaction as shown in the bellow figure? (A) The rate of disappearance of 'Y' is equal to the rate of appearance of 'Z' (B) The rate of disappearance of 'Y ... of 'Z' (D) The rate of disappearance of 'X' is equal to the rate of appearance of 'Z

Last Answer : (C) Three times the rate of disappearance of 'X' is equal to the rate of appearance of 'Z

In a chemical reaction, represented by as shown in the bellow figure, it is observed that the (i) Rate of reaction increases by a factor of 4 on doubling the concentration of the reactant. (ii) Rate of reaction increases by a factor of 9 on trebling the concentration of the reactant. Then the rate of the reaction is proportional to(where, CA = concentration of the reactant) (A) CA (B) CA 2 (C) CA 3 (D) CA

Description : In a chemical reaction, represented by as shown in the bellow figure, it is observed that the (i) Rate of reaction increases by a factor of 4 on doubling the concentration of the reactant. (ii) Rate of reaction increases ... where, CA = concentration of the reactant) (A) CA (B) CA 2 (C) CA 3 (D) CA

Last Answer : (B) CA 2

Decomposition rate of a liquid 'X' which decomposes as per the reaction as shown in the bellow figure is given by: (A) K1 . CX (B) (K1 + K2 + K3 ) CX (C) (K1 + K2 ) CX (D) (K2 + K3 ) CX

Description : Decomposition rate of a liquid 'X' which decomposes as per the reaction as shown in the bellow figure is given by: (A) K1 . CX (B) (K1 + K2 + K3 ) CX (C) (K1 + K2 ) CX (D) (K2 + K3 ) CX

Last Answer : (C) (K1 + K2 ) CX

Effectiveness factor of a catalyst pellet is a measure of the __________ resistance. (A) Pore diffusion (B) Gas film (C) Chemical reaction (D) None of these

Description : Effectiveness factor of a catalyst pellet is a measure of the __________ resistance. (A) Pore diffusion (B) Gas film (C) Chemical reaction (D) None of these

Last Answer : (A) Pore diffusion

McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Description : McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Last Answer : (D) None of these

In case of a consecutive unimolecular types first order reaction asshown in the bellow figure, the concentration of component __________ increases continuously with time. (A) S (B) R (C) A (D) None of these

Description : In case of a consecutive unimolecular types first order reaction asshown in the bellow figure, the concentration of component __________ increases continuously with time. (A) S (B) R (C) A (D) None of these

Last Answer : (A) S

Reaction rate equation for the bellow figure reaction, If S at is present in large excess, what is the order of this reaction? (A) Zero (B) One (C) Two (D) Three

Description : Reaction rate equation for the bellow figure reaction, If S at is present in large excess, what is the order of this reaction? (A) Zero (B) One (C) Two (D) Three

Last Answer : (B) One

With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Description : With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Last Answer : (A) Decreases

A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg (B) ke ff = (k+ kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Description : A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg ( ... + kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Last Answer : (D) 1/ke ff = 1/k + 1/kg

Which of the following unit operations makes use of Thiele-Geddes equation? (A) Liquid-liquid extraction (B) Solid-liquid extraction (C) Multi-component absorption with chemical reaction (D) Multi-component distillation

Description : Which of the following unit operations makes use of Thiele-Geddes equation? (A) Liquid-liquid extraction (B) Solid-liquid extraction (C) Multi-component absorption with chemical reaction (D) Multi-component distillation

Last Answer : (D) Multi-component distillation

If the pore diffusion controls in a catalytic reaction, the apparent activation energy Ea is equal to (A) The intrinsic activation energy E (B) (E + ED) where ED is activation due to diffusion (C) (E + ED)/2 (D) ED/2

Description : If the pore diffusion controls in a catalytic reaction, the apparent activation energy Ea is equal to (A) The intrinsic activation energy E (B) (E + ED) where ED is activation due to diffusion (C) (E + ED)/2 (D) ED/2

Last Answer : (D) ED/2

In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Description : In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Last Answer : (A) Increase of temperature

For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Chemical

For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Description : For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Last Answer : (B) Fluidised bed reactor followed by a fixed

Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Description : Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Last Answer : (C) Mixed

Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Description : Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Description : The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Description : Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

In the circuit shown in Fig. 4.67, the resistance of the ammeter A is negligible and that of thevoltmeter V is very high. When the switch S is open, t

Description : In the circuit shown in Fig. 4.67, the resistance of the ammeter A is negligible and that of thevoltmeter V is very high. When the switch S is open, t

Last Answer : In the circuit shown in Fig. 4.67, the resistance of the ammeter A is negligible and that of ... internal resistance of the cell (iii) value of R.

In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and `R = 100 Omega`, the galvanometer `(G

Description : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and `R = 100 Omega`, the galvanometer `(G

Last Answer : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and ` ... A. 4 V B. 2 V C. 12 V D. 6 V

Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Description : Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Last Answer : (D) All (A), (B), & (C)

. B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Description : . B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Last Answer : (C) Surface area

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Description : With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Last Answer : (A) Increases

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

__________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Description : __________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Last Answer : (C) Chemical reaction

The neutral stress in a soil mass is (A) Force per neutral area (B) Force per effective area (C) Stress taken up by the pore water (D) Stress taken up by solid particles

Description : The neutral stress in a soil mass is (A) Force per neutral area (B) Force per effective area (C) Stress taken up by the pore water (D) Stress taken up by solid particles

Last Answer : Answer: Option C

Find the potential difference between the points A and B in the circuit shown in Fig. 4.66. Internal resistances of the cells are negligible.

Description : Find the potential difference between the points A and B in the circuit shown in Fig. 4.66. Internal resistances of the cells are negligible.

Last Answer : Find the potential difference between the points A and B in the circuit shown in Fig. 4.66. Internal resistances of the cells are negligible.