A consecutive reaction, as shown in the bellow figure, is characterised by(A) Maxima in the concentration of A(B) Maxima in the concentration of B(C) Maxima in the concentration of C(D) High exothermicity

A consecutive reaction, as shown in the bellow figure, is characterised
by.
(A) Maxima in the concentration of A
(B) Maxima in the concentration of B
(C) Maxima in the concentration of C
(D) High exothermicity
by

1 Answer

Answer :

(B) Maxima in the concentration of B
by

Related questions

In case of a consecutive unimolecular types first order reaction asshown in the bellow figure, the concentration of component __________ increases continuously with time. (A) S (B) R (C) A (D) None of these

Description : In case of a consecutive unimolecular types first order reaction asshown in the bellow figure, the concentration of component __________ increases continuously with time. (A) S (B) R (C) A (D) None of these

Last Answer : (A) S

In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Description : In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Last Answer : (A) Increase of temperature

For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A(A) Zero(B) First(C) Second(D) Third.

Description : For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A. (A) Zero (B) First (C) Second (D) Third

Last Answer : (B) First

In a chemical reaction as shown in the bellow figure, it is observed that the (i) Rate of formation of 'P' is doubled on doubling the concentration of 'X' (ii) Rate of formation of 'P' is quadrupled on doubling the concentration of 'Y(iii) Doubling the concentration of 'Z' does not affect the rate of formation of 'P' What is the order of the above chemical reaction?(A) Zeroth order (B) First order (C) Second order (D) Third order

Description : In a chemical reaction as shown in the bellow figure, it is observed that the (i) Rate of formation of 'P' is doubled on doubling the concentration of 'X' (ii) Rate of formation of 'P' is quadrupled ... of the above chemical reaction? (A) Zeroth order (B) First order (C) Second order (D) Third order

Last Answer : (D) Third order

What is the order of chemical reaction as shown in the bellow figure, if it is found that the reaction rate doubles on doubling the concentration of B and also the reaction rate doubles when the concentrations of both A & B were doubled and quadrupled when the concentrations of both B & C were doubled? (A) 1 (B) 2 (C) 3 (D) 4

Description : What is the order of chemical reaction as shown in the bellow figure, if it is found that the reaction rate doubles on doubling the concentration of B and also the reaction rate doubles when the concentrations of both A & B ... the concentrations of both B & C were doubled? (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (B) 2

In a chemical reaction, represented by as shown in the bellow figure, it is observed that the (i) Rate of reaction increases by a factor of 4 on doubling the concentration of the reactant. (ii) Rate of reaction increases by a factor of 9 on trebling the concentration of the reactant. Then the rate of the reaction is proportional to(where, CA = concentration of the reactant) (A) CA (B) CA 2 (C) CA 3 (D) CA

Description : In a chemical reaction, represented by as shown in the bellow figure, it is observed that the (i) Rate of reaction increases by a factor of 4 on doubling the concentration of the reactant. (ii) Rate of reaction increases ... where, CA = concentration of the reactant) (A) CA (B) CA 2 (C) CA 3 (D) CA

Last Answer : (B) CA 2

What is the Thiele modulus of the solid catalysed first order reaction as shown in the bellow figure, if the pore diffusion offers negligible resistance to reaction? (A) < 5 (B) < 0.5(C) > 1 (D) 5

Description : What is the Thiele modulus of the solid catalysed first order reaction as shown in the bellow figure, if the pore diffusion offers negligible resistance to reaction? (A) < 5 (B) < 0.5 (C) > 1 (D) 5

Last Answer : (B) < 0.5

The equilibrium constant for the reversible reaction as shown in the bellow figure, is affected by the (A) Temperature of the system (B) Presence or absence of inerts (C) Pressure of the system (D) Kinetics of the reaction

Description : The equilibrium constant for the reversible reaction as shown in the bellow figure, is affected by the (A) Temperature of the system (B) Presence or absence of inerts (C) Pressure of the system (D) Kinetics of the reaction

Last Answer : (C) Pressure of the system

For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Description : For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Last Answer : (A) Zero

The order of the chemical reaction as shown in the bellow figure, whose rate equation is given as -rA = KCA 2 . CB is (A) 0 (B) 1 (C) 2 (D) 3

Description : The order of the chemical reaction as shown in the bellow figure, whose rate equation is given as -rA = KCA 2 . CB is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

Which of the following holds good for an elementary reaction as shown in the bellow figure? (A) The rate of disappearance of 'Y' is equal to the rate of appearance of 'Z' (B) The rate of disappearance of 'Y' is equal to the rate of disappearance ofX'(C) Three times the rate of disappearance of 'X' is equal to the rate ofappearance of 'Z'(D) The rate of disappearance of 'X' is equal to the rate of appearance of 'Z

Description : Which of the following holds good for an elementary reaction as shown in the bellow figure? (A) The rate of disappearance of 'Y' is equal to the rate of appearance of 'Z' (B) The rate of disappearance of 'Y ... of 'Z' (D) The rate of disappearance of 'X' is equal to the rate of appearance of 'Z

Last Answer : (C) Three times the rate of disappearance of 'X' is equal to the rate of appearance of 'Z

Decomposition rate of a liquid 'X' which decomposes as per the reaction as shown in the bellow figure is given by: (A) K1 . CX (B) (K1 + K2 + K3 ) CX (C) (K1 + K2 ) CX (D) (K2 + K3 ) CX

Description : Decomposition rate of a liquid 'X' which decomposes as per the reaction as shown in the bellow figure is given by: (A) K1 . CX (B) (K1 + K2 + K3 ) CX (C) (K1 + K2 ) CX (D) (K2 + K3 ) CX

Last Answer : (C) (K1 + K2 ) CX

For the reaction as shown in the bellow figure, the rate of formation of Z is 0.2 gm mole/litre.hr. What is the rate of disappearance of X in gm mole/litre.hr? (A) 0.4 (B) 0.1 (C) 0.2 (D) None of these

Description : For the reaction as shown in the bellow figure, the rate of formation of Z is 0.2 gm mole/litre.hr. What is the rate of disappearance of X in gm mole/litre.hr? (A) 0.4 (B) 0.1 (C) 0.2 (D) None of these

Last Answer : (A) 0.4

Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Description : Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Last Answer : (B) Exponentially

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA

With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Description : With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Last Answer : (A) Decreases

Reaction rate equation for the bellow figure reaction, If S at is present in large excess, what is the order of this reaction? (A) Zero (B) One (C) Two (D) Three

Description : Reaction rate equation for the bellow figure reaction, If S at is present in large excess, what is the order of this reaction? (A) Zero (B) One (C) Two (D) Three

Last Answer : (B) One

Rate of a chemical reaction is independent of the concentration of the reactants for a __________ reaction. (A) Zero order (B) Third order (C) Consecutive (D) None of these

Description : Rate of a chemical reaction is independent of the concentration of the reactants for a __________ reaction. (A) Zero order (B) Third order (C) Consecutive (D) None of these

Last Answer : (A) Zero order

In PS I the reaction centre chlorophyll a has an absorption peak at 700 nm, hence is called (A)____ while in PS II it has absorption maxima at 680 nm

Description : In PS I the reaction centre chlorophyll a has an absorption peak at 700 nm, hence is called (A)____ while in PS II it has absorption maxima at 680 nm

Last Answer : In PS I the reaction centre chlorophyll a has an absorption peak at 700 nm, hence is called (A) ... absorption maxima at 680 nm and is called (B)____

A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Description : A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Last Answer : (C) Presence of lateral mixing

For shell and tube heat exchanger, with increasing heat transfer area, the purchased cost per unit heat transfer area (A) Increases (B) Decreases (C) Remain constant (D) Passes through a maxima

Description : For shell and tube heat exchanger, with increasing heat transfer area, the purchased cost per unit heat transfer area (A) Increases (B) Decreases (C) Remain constant (D) Passes through a maxima

Last Answer : (D) Passes through a maxima

. A batch reactor is characterised by (A) Constant residence time(B) Variation in extent of reaction and properties of the reaction mixture withtime(C) Variation in reactor volume(D) Very low conversion

Description : . A batch reactor is characterised by (A) Constant residence time (B) Variation in extent of reaction and properties of the reaction mixture with time (C) Variation in reactor volume (D) Very low conversion

Last Answer : (B) Variation in extent of reaction and properties of the reaction mixture with time

Hello everybody, I need a company email finder that has all the bellow characteristic:First of all, it verifies the emails, then its high speed is really significant for me. Also I cannot pay a lot of money as I just have started my business.?

Description : Hello everybody, I need a company email finder that has all the bellow characteristic:First of all, it verifies the emails, then its high speed is really significant for me. Also I cannot pay a lot of money as I just have started my business.?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

What are some common problems associated with bellow expansion joints?

Description : What are some common problems associated with bellow expansion joints?

Last Answer : Bellow expansion joints have gained a reputation for being weak points in piping. Usually they are used to remove piping stresses from equipment or to allow for minor piping moments. If they are ... such method is the use of tie rods between the end flanges to avoid pressure thrust movements

A multiple reaction may be classified as a __________ reaction. (A) Consecutive or side (B) Parallel or side (C) Mixed (D) All (A), (B) and (C)

Description : A multiple reaction may be classified as a __________ reaction. (A) Consecutive or side (B) Parallel or side (C) Mixed (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The rate of reaction of a/an __________ reaction is not affected by temperature rise. (A) Autocatalytic (B) Photochemical (C) Consecutive (D) Zero order

Description : The rate of reaction of a/an __________ reaction is not affected by temperature rise. (A) Autocatalytic (B) Photochemical (C) Consecutive (D) Zero order

Last Answer : (B) Photochemical

. Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel(C) Consecutive(D) None of these

Description : . Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel (C) Consecutive (D) None of these

Last Answer : (C) Consecutive

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Does anyone know how many miles a 2001 Nissan Maxima can run after the gas light turns on?

Description : Does anyone know how many miles a 2001 Nissan Maxima can run after the gas light turns on?

Last Answer : I wouldn’t risk it. I would highly recommend stopping for a gallon of gas or two in the meantime. Running out of gas can cause serious mechanical problems in some cars. I’m not saying it will in yours, but it can in some.

What kind of gas mileage does a 2000 Nissan Maxima SLE get?

Description : What kind of gas mileage does a 2000 Nissan Maxima SLE get?

Last Answer : answer:Here are the government figures. “Fuel Type Regular MPG (city) 19 MPG (highway) 25 MPG (combined) 21 Fuel Economics Cost to Drive 25 Miles $3.07 Fuel to Drive 25 Miles 1.19 gal Annual Fuel Cost $1842”

If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Description : If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Last Answer : b. there is at least one couple acting on the beam

What do you need to do a full tune up on 2014 Nissan Maxima?

Description : What do you need to do a full tune up on 2014 Nissan Maxima?

Last Answer : That will depend on age and mileage to date - refer to theowners manual and/or the service manual.

Where is the fuse box located on a 2000 Nissan maxima?

Description : Where is the fuse box located on a 2000 Nissan maxima?

Last Answer : What is the answer ?

What color interior comes standard on a Nissan Maxima?

Description : What color interior comes standard on a Nissan Maxima?

Last Answer : There are two standard interior colors on a Nossan Maxima depending on the exterior color you choose. They are a gray called charcoal cloth and a light beige called cafe latte cloth.

How much does a Nissan Maxima cost?

Description : How much does a Nissan Maxima cost?

Last Answer : According to the official Nissan site http://www.nissanusa.com/maxima/, the MSRP for the 3.5 S is 30,690.

Nucleic acids can be detected by means of their absorption maxima near 260 nm. Their absorption in this range is due to (A) Proteins (B) Purines and pyrimidines (C) Ribose (D) Deoxyribose

Description : Nucleic acids can be detected by means of their absorption maxima near 260 nm. Their absorption in this range is due to (A) Proteins (B) Purines and pyrimidines (C) Ribose (D) Deoxyribose

Last Answer : Answer : B

If a star is bigger than Sun, but not more than twice as big, it will turn into a (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Description : If a star is bigger than Sun, but not more than twice as big, it will turn into a (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Last Answer : (1) Pulsar Explanation: If the star is about the mass of the Sun or less than that, it will turn into White Dwarfs. If the star is bigger than the Sun but not more than twice as big, it will turn into a Neutron Star or Pulsar.

If a star is bigger than Sun, but not more than twice as big, it will turn into a __ (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Description : If a star is bigger than Sun, but not more than twice as big, it will turn into a __ (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Last Answer : (1) Pulsar Explanation: If the star is about the mass of the Sun or less than that, it will turn into White Dwarfs. If the star is bigger than the Sun but not more than twice as big, it will ... Pulsar. If the star is many times bigger than the Sun, it will turn into what is called a Black Hole.

The main causative agent of Epizootic Ulcerative Syndorme (EVS) is (a) Aphanomyces invadens (b) A. hydrophilla (c) Pseudomonas maxima (d) Myxobolus cyprinid

Description : The main causative agent of Epizootic Ulcerative Syndorme (EVS) is (a) Aphanomyces invadens (b) A. hydrophilla (c) Pseudomonas maxima (d) Myxobolus cyprinid

Last Answer : (a) Aphanomyces invadens

The maxima and minima voltage of the standing wave are 6 and 2 respectively. The standing wave ratio is a) 2 b) 3 c) 1/2 d) 4

Description : The maxima and minima voltage of the standing wave are 6 and 2 respectively. The standing wave ratio is a) 2 b) 3 c) 1/2 d) 4

Last Answer : b) 3

Standing wave ratio is defined as the a) Ratio of voltage maxima to voltage minima b) Ratio of current maxima to current minima c) Product of voltage maxima and voltage minima d) Product of current maxima and current minima

Description : Standing wave ratio is defined as the a) Ratio of voltage maxima to voltage minima b) Ratio of current maxima to current minima c) Product of voltage maxima and voltage minima d) Product of current maxima and current minima

Last Answer : a) Ratio of voltage maxima to voltage minima

The maximum power transceived by the antenna is in the region of a) Aperture b) Effective aperture c) Maxima lobe d) Minima lobe

Description : The maximum power transceived by the antenna is in the region of a) Aperture b) Effective aperture c) Maxima lobe d) Minima lobe

Last Answer : b) Effective aperture

What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity of central maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Description : What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity ... maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Last Answer : B. Intensity of central maxima will increase

How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of secondary maxima remains constant on either side C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Description : How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of ... C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Last Answer : A. Intensity of secondary maxima decreases on either sides

In plane transmission grating, the angle of diffraction for second order maxima for wavelength 5 x 10 -5 cm is 30 0. Calculate the number of lines in one centimeter of the grating surface. A. 1000 lines/cm B. 5000 lines/cm C. 500 lines/cm D. 10000 lines/cm

Description : In plane transmission grating, the angle of diffraction for second order maxima for wavelength 5 x 10 -5 cm is 30 0. Calculate the number of lines in one centimeter of the grating surface. A. 1000 lines/cm B. 5000 lines/cm C. 500 lines/cm D. 10000 lines/cm

Last Answer : B. 5000 lines/cm

Define Local maxima.

Description : Define Local maxima.

Last Answer : A local maximum is a peak that is higher than each of its neighboring states, but lower than the global maximum.

If a star is bigger than Sun, but not more than twice as big, it will turn into a _______. (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Description : If a star is bigger than Sun, but not more than twice as big, it will turn into a _______. (1) Pulsar (2) Maxima (3) Avenger (4) Discover

Last Answer : Pulsar