Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction?(A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Which of the following resistances is not involved in a gas phase
catalytic (gas-solid) reaction?
(A) Ash resistance
(B) Gas film and pore surface diffusion resistances for reactants
(C) Surface phenomenon resistance
(D) Gas film and pore surface diffusion resistances for products
by

1 Answer

Answer :

(A) Ash resistance
by

Related questions

Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Description : Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Last Answer : (B) Film diffusion

If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Description : If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Last Answer : (A) Film

__________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Description : __________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Last Answer : (C) Chemical reaction

For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (C) Chemical reaction

For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

Effectiveness factor of a catalyst pellet is a measure of the __________ resistance. (A) Pore diffusion (B) Gas film (C) Chemical reaction (D) None of these

Description : Effectiveness factor of a catalyst pellet is a measure of the __________ resistance. (A) Pore diffusion (B) Gas film (C) Chemical reaction (D) None of these

Last Answer : (A) Pore diffusion

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

If the pore diffusion controls in a catalytic reaction, the apparent activation energy Ea is equal to (A) The intrinsic activation energy E (B) (E + ED) where ED is activation due to diffusion (C) (E + ED)/2 (D) ED/2

Description : If the pore diffusion controls in a catalytic reaction, the apparent activation energy Ea is equal to (A) The intrinsic activation energy E (B) (E + ED) where ED is activation due to diffusion (C) (E + ED)/2 (D) ED/2

Last Answer : (D) ED/2

What is the Thiele modulus of the solid catalysed first order reaction as shown in the bellow figure, if the pore diffusion offers negligible resistance to reaction? (A) < 5 (B) < 0.5(C) > 1 (D) 5

Description : What is the Thiele modulus of the solid catalysed first order reaction as shown in the bellow figure, if the pore diffusion offers negligible resistance to reaction? (A) < 5 (B) < 0.5 (C) > 1 (D) 5

Last Answer : (B) < 0.5

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

__________ resistance is not involved in the combustion of a carbon particle. (A) Gas film (B) Ash (C) Chemical reaction (D) None of these

Description : __________ resistance is not involved in the combustion of a carbon particle. (A) Gas film (B) Ash (C) Chemical reaction (D) None of these

Last Answer : (B) Ash

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

If Thiele modulus is __________, then the pore diffusion resistance in a catalyst may be considered as negligible. (A) 0 (B) ∞ (C) < 0.5 (D) > 0.5

Description : If Thiele modulus is __________, then the pore diffusion resistance in a catalyst may be considered as negligible. (A) 0 (B) ∞ (C) < 0.5 (D) > 0.5

Last Answer : (C) < 0.5

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of the reacting molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules

Consider the following gas - phase reaction : `2A(g)+B(g)rArrC(g)+D(g)` An equilibrium mixture of reactants and products is subjected to the following

Description : Consider the following gas - phase reaction : `2A(g)+B(g)rArrC(g)+D(g)` An equilibrium mixture of reactants and products is subjected to the following

Last Answer : Consider the following gas - phase reaction : `2A(g)+B(g)rArrC(g)+D(g)` An equilibrium mixture of reactants and ... II, III C. II, III, IV D. I, III

Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Description : Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Description : The importance of diffusion in a catalyst are increased by (A) Large catalyst particle size (B) An active surface of the catalyst (C) Small pore diameter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) reaction between absorbed A and B in the gas phase (B) Surface reaction between absorbed A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B(D) Desorption of C

Description : For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) ... A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B (D) Desorption of C

Last Answer : (D) Desorption of C

Effectiveness factor (E) of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) (A) tan hT/T (B) tan T/T(C) tan hT/tan T(D) None of these

Description : Effectiveness factor (E) of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) (A) tan hT/T (B) tan T/T (C) tan hT/tan T (D) None of these

Last Answer : (A) tan hT/T

Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Description : Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Last Answer : (D) None of these

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Burning of Gasoline initially requires heat before it burns spontaneously. Which of the following does not give a good explanation of this phenomenon?  a. the initial heat rises the enthalpy of the reactant  b. the initial heat lowers the activation of energy of the reactants  c. the enthalpy of reactants is lower than the enthalpy of products.  d. The enthalpy of the product is lower than the enthalpy of the reactant

Description : Burning of Gasoline initially requires heat before it burns spontaneously. Which of the following does not give a good explanation of this phenomenon?  a. the initial heat rises the enthalpy of the reactant ... of products.  d. The enthalpy of the product is lower than the enthalpy of the reactant

Last Answer : the enthalpy of reactants is lower than the enthalpy of products.

__________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Description : __________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Last Answer : (A) Homogeneous

Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates is not used to derive BET equation? (A) Langmuir's assumption applies to every adsorbed layer (B) There is no dynamic equilibrium between successive layer (C) The adsorbed layer may be polymolecular in thickness and the heat of adsorption in each layer (except the first one) is involved in each of the evaporation process (D) None of these

Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these

Last Answer : (B) There is no dynamic equilibrium between successive layer

. B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Description : . B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Last Answer : (C) Surface area

In a reversible chemical reaction (where, Δx = number of moles of products-number of moles of reactants) (A) Addition of inert gas favours the forward reaction, when Δx is positive (B) Pressure has no effect on equilibrium, when Δn = 0 (C) Addition of inert gas has no effect on the equilibrium constant at constant volume for any value of Δx (+ ve, - ve) or zero) (D) All 'a', 'b' & 'c'

Description : In a reversible chemical reaction (where, Δx = number of moles of products-number of moles of reactants) (A) Addition of inert gas favours the forward reaction, when Δx is positive (B) Pressure has no effect on equilibrium, when Δn = ... any value of Δx (+ ve, - ve) or zero) (D) All 'a', 'b' & 'c'

Last Answer : D) All 'a', 'b' & 'c'

In solid catalysed reactions the diffusional effects are more likely to affect the overall rate of reaction for (A) Fast reactions in catalyst of small pore diameter (B) Fast reaction in catalyst of large pore diameter (C) Slow reactions in catalyst of small pore diameter (D) Slow reactions in catalyst of large pore diameter

Description : In solid catalysed reactions the diffusional effects are more likely to affect the overall rate of reaction for (A) Fast reactions in catalyst of small pore diameter (B) Fast reaction in catalyst ... reactions in catalyst of small pore diameter (D) Slow reactions in catalyst of large pore diameter

Last Answer : (C) Slow reactions in catalyst of small pore diameter

In the process of dialysis, used on patients with affected kidneys, the phenomenon involved is (a) diffusion (b) absorption (c) osmosis (d) electrophoresis

Description : In the process of dialysis, used on patients with affected kidneys, the phenomenon involved is (a) diffusion (b) absorption (c) osmosis (d) electrophoresis

Last Answer : Ans:(c)

In the process of dialysis, used on patients with affected kidneys, the phenomenon involved is (1) Diffusion (2) Absorption (3) Osmosis (4) Electrophoresis

Description : In the process of dialysis, used on patients with affected kidneys, the phenomenon involved is (1) Diffusion (2) Absorption (3) Osmosis (4) Electrophoresis

Last Answer : (3) Osmosis Explanation: Dialysis is the artificial process of getting rid of waste (diffusion) and unwanted water (ultrafiltration) from the blood. This process is naturally done by our kidneys. It ... it results in osmotic pressure which causes the fluid to move from the blood into the dialysate.

A bottle filled with previously moistened mustard seeds and water was screw capped tightly and kept in a corner. It blew up suddenly after about half an hour. The phenomenon involved is (a) diffusion (b) imbibition (c) osmosis (d) DPD.

Description : A bottle filled with previously moistened mustard seeds and water was screw capped tightly and kept in a corner. It blew up suddenly after about half an hour. The phenomenon involved is (a) diffusion (b) imbibition (c) osmosis (d) DPD.

Last Answer : b) imbibition

In the process of dialysis, used on patients with affected kidneys, the phenomenon involved is (1) Diffusion(2) Absorption (3) Osmosis (4) Electrophoresis

Description : In the process of dialysis, used on patients with affected kidneys, the phenomenon involved is (1) Diffusion(2) Absorption (3) Osmosis (4) Electrophoresis

Last Answer : Osmosis

Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Description : Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

.Which is most likely to be exposed on the surface of a gram-negative bacterium? A.Pore protein (porin) B.Protein involved in energy generation C.Lipoteichoic acid D.Phospholipids

Description : .Which is most likely to be exposed on the surface of a gram-negative bacterium? A.Pore protein (porin) B.Protein involved in energy generation C.Lipoteichoic acid D.Phospholipids

Last Answer : A.Pore protein (porin)

Which is most likely to be exposed on the surface of a gram-negative bacterium? A- Pore protein (porin) B- Protein involved in energy generation C- .Lipoteichoic acid D- Phospholipids

Description : Which is most likely to be exposed on the surface of a gram-negative bacterium? A- Pore protein (porin) B- Protein involved in energy generation C- .Lipoteichoic acid D- Phospholipids

Last Answer : Pore protein (porin)

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Description : In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Last Answer : (B) The conversion of the reactant varies from point to point along a flow path

A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Description : A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Last Answer : (D) Employs all the three phases (i.e. solid, liquid and gas)

Non-catalytic fluid-solid reactions are represented by __________ model. (A) Continuous reaction (B) Unreacted core (C) Both (A) and (B) (D) Neither (A) and (B)

Description : Non-catalytic fluid-solid reactions are represented by __________ model. (A) Continuous reaction (B) Unreacted core (C) Both (A) and (B) (D) Neither (A) and (B)

Last Answer : (C) Both (A) and (B)

Reverse reaction in a chemical equilibrium is favoured by the (A) Removal of one of the products regularly (B) Increase in the concentration of one of the products (C) Increase in the concentration of one of the reactants (D) None of these

Description : Reverse reaction in a chemical equilibrium is favoured by the (A) Removal of one of the products regularly (B) Increase in the concentration of one of the products (C) Increase in the concentration of one of the reactants (D) None of these

Last Answer : (B) Increase in the concentration of one of the products

Which of the following will favour the reverse reaction in a chemical equilibrium reaction? (A) Increasing the concentration of one of the reactants (B) Increasing the concentration of one or more of the products (C) Removal of at least one of the products at regular interval (D) None of these

Description : Which of the following will favour the reverse reaction in a chemical equilibrium reaction? (A) Increasing the concentration of one of the reactants (B) Increasing the concentration of one or more of the products (C) Removal of at least one of the products at regular interval (D) None of these

Last Answer : (B) Increasing the concentration of one or more of the products

For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Description : For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In an exothermic chemical reaction, the reactants compared to the products have (A) Higher temperature (B) More energy (C) Less energy (D) Same energy

Description : In an exothermic chemical reaction, the reactants compared to the products have (A) Higher temperature (B) More energy (C) Less energy (D) Same energy

Last Answer : (B) More energy

The excess energy of reactants in a chemical reaction required to dissociate into products is termed as the __________ energy. (A) Activation (B) Potential (C) Binding (D) Threshold

Description : The excess energy of reactants in a chemical reaction required to dissociate into products is termed as the __________ energy. (A) Activation (B) Potential (C) Binding (D) Threshold

Last Answer : (A) Activation