Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Which of the following is an adsorbent used for the removal of SO2
from
gas/air?
(A) Bog iron
(B) Limestone powder or alkalised alumina
(C) Silica gel
(D) Active carbon
by

1 Answer

Answer :

(B) Limestone powder or alkalised alumina
by

Related questions

Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone

Description : Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone

Last Answer : (B) Silica gel

H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder

Description : H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder

Last Answer : (C) Bog iron

Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)

Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Last Answer : (D) Activated carbon

Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay

Description : Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay

Last Answer : (A) Bone charcoal

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel(C) Platinum(D) Nickel

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Quartz is a crystalline form of - (1) Alumina (2) Glass (3) Silica (4) Limestone

Description : Quartz is a crystalline form of - (1) Alumina (2) Glass (3) Silica (4) Limestone

Last Answer : (3) Silica Explanation: Quartz is made up of a continuous framework of SiO4 silicon-oxygen tetrahedra, with each oxygen being shared between two tetrahedra, giving an overall formula SiO2. Tridymite ... is a denser polymorph of quartz found in some meteorite impact sites and in metamorphic rocks.

Quartz is a crystalline form of (1) Alumina (2) Glass (3) Silica (4) Limestone

Description : Quartz is a crystalline form of (1) Alumina (2) Glass (3) Silica (4) Limestone

Last Answer : Silica

Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : C

Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Description : Which of the following is commonly used as liquid absorbent?  a. Silica gel  b. Activated alumina  c. Ethylene glycol  d. None of these

Last Answer : Ethylene glycol

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these

Description : Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these

Last Answer : (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide)

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Last Answer : (A) Reduced iron oxide

Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : Lime : Iron oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Description : Pick up the correct proportions of chemical ingredients of cement (A) Lime : Silica : Alumina : Iron oxide : 63 : 22 : 6 : 3 (B) Silica : Lime : Alumina : Iron oxide : 63 : 22 : 6 : 3 (C) Alumina : Silica : ... oxide : 63 : 22 : 6 : 3 (D) Iron oxide : Alumina : Silica : Lime : 63 : 22 : 6 : 3

Last Answer : Answer: Option A

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Description : The main ingredients of Portland cement are (A) Lime and silica (B) Lime and alumina (C) Silica and alumina (D) Lime and iron

Last Answer : Answer: Option A

Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia

Description : Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia

Last Answer : Answer: Option B

Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Description : Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Last Answer : Answer: Option B

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Description : The proportion of lime, silica, alumina and iron oxide in a Portland cement is (a) 63:22:6:3 (b) 63:22:3:6 (c) 22:63:6:3 (d) All the above

Last Answer : (a) 63:22:6:3

The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Description : The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Last Answer : (c) Lime

Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Description : Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Last Answer : [ A ] Alkalies

White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Description : White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Last Answer : [ D ] Iron oxide

Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Description : Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Last Answer : b) Silica*

. Ethanolamine is an absorbent used for the removal of __________ from air/gas. (A) HF (B) SO2 (C) H2S (D) Both (B) & (C)

Description : . Ethanolamine is an absorbent used for the removal of __________ from air/gas. (A) HF (B) SO2 (C) H2S (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Naphthalene is removed from coke oven gas by (A) Scrubbing with wash oil (a petroleum product) (B) Adsorbing on bog iron bed (C) Absorbing in vetro-coke solution (D) None of these

Description : Naphthalene is removed from coke oven gas by (A) Scrubbing with wash oil (a petroleum product) (B) Adsorbing on bog iron bed (C) Absorbing in vetro-coke solution (D) None of these

Last Answer : (A) Scrubbing with wash oil (a petroleum product)

At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

Wet chlorine gas produced during electrolysis of brine is dehydrated by (A) Spraying 66° Be H2SO4 counter current to the flow of the gas (B) Passing it through a bed of diatomaceous earth (C) Passing it through a bed of silica gel (D) None of these

Description : Wet chlorine gas produced during electrolysis of brine is dehydrated by (A) Spraying 66° Be H2SO4 counter current to the flow of the gas (B) Passing it through a bed of diatomaceous earth (C) Passing it through a bed of silica gel (D) None of these

Last Answer : (A) Spraying 66° Be H2SO4 counter current to the flow of the gas

Fusion of limestone and __________ produces high alumina cement. (A) Sand (B) Bauxite (C) Quicklime (D) Calcite

Description : Fusion of limestone and __________ produces high alumina cement. (A) Sand (B) Bauxite (C) Quicklime (D) Calcite

Last Answer : (B) Bauxite

Fusion of bauxite and __________ produces high alumina cement. (A) Alum (B) Limestone (C) Coke (D) Quartz

Description : Fusion of bauxite and __________ produces high alumina cement. (A) Alum (B) Limestone (C) Coke (D) Quartz

Last Answer : (B) Limestone

When air passes through silica gel, A. it absorbs water vapour molecules B. latent heat of condensation is released C.dbt of air increases D. all of the mentioned

Description : When air passes through silica gel, A. it absorbs water vapour molecules B. latent heat of condensation is released C.dbt of air increases D. all of the mentioned

Last Answer : ANSWER : D

The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer is `129 cm^(3) g^(-1)` of gel. Ca

Description : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer is `129 cm^(3) g^(-1)` of gel. Ca

Last Answer : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer ... `16.2 xx 10^(-20) m^(2).`

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Description : Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Last Answer : (D) High alumina & high magnesia

Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Description : Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Last Answer : (C) Synthetic zeolites crystals/metal alumino-silicates

Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Description : Scale formation in boiler is controlled by (A) Preheating of feed water (B) Reduction in hardness, silica & alumina in feed water (C) Keeping the pH value of feed water just below 7 (D) Eliminating H2S in feed water

Last Answer : (B) Reduction in hardness, silica & alumina in feed water

The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Description : The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Last Answer : (C) 20% oleum

Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda

Description : Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda

Last Answer : (A) Lead oxide

The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Last Answer : Option C