Wet chlorine gas produced during electrolysis of brine is dehydrated by (A) Spraying 66° Be H2SO4 counter current to the flow of the gas (B) Passing it through a bed of diatomaceous earth (C) Passing it through a bed of silica gel (D) None of these

Wet chlorine gas produced during electrolysis of brine is dehydrated by
(A) Spraying 66° Be H2SO4 counter current to the flow of the gas
(B) Passing it through a bed of diatomaceous earth
(C) Passing it through a bed of silica gel
(D) None of these
by

1 Answer

Answer :

(A) Spraying 66° Be H2SO4 counter current to the flow of the gas
by

Related questions

Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)

The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel

Description : The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel

Last Answer : (A) Diatomaceous earth

Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Description : Chlorine gas is produced by the electrolysis of brine (NaCl solution with solid NaCl make up) in mercury electrolytic cell. Which of the following is the anodic reaction? (A) Oxidation of Na + ions (B) Oxidation of Cl - ions (C) Reduction of Na + ions (D) Reduction of Cl - ions

Last Answer : (B) Oxidation of Cl - ions

Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Description : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` released a diatomic gas Q. Find the value

Last Answer : A gas P is obtained at anode during the electrolysis of brine. The gas P when treated with excess of `NH_3` ... x & y are the molar mass of P and Q.

Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Description : Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Last Answer : (A) Oxidation of ammonia

Which of the following is a co-product during the manufacture of caustic soda by electrolysis of brine? (A) Na2CO3 (B) NaHCO3 (C) H2 (D) None of these

Description : Which of the following is a co-product during the manufacture of caustic soda by electrolysis of brine? (A) Na2CO3 (B) NaHCO3 (C) H2 (D) None of these

Last Answer : (C) H2

Good quality of edible salt is obtained from brine by the process of (A) Solar evaporation (B) Vacuum evaporation (C) Freeze drying (D) Electrolysis

Description : Good quality of edible salt is obtained from brine by the process of (A) Solar evaporation (B) Vacuum evaporation (C) Freeze drying (D) Electrolysis

Last Answer : (B) Vacuum evaporation

What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Last Answer : (D) Cl2 , H2 & NaOH solution

Centrifugal pump made of pyrex or glass can't be used to pump (A) Milk and fruit juices (B) Alkaline solutions (C) Dilute H2SO4 at room temperature (D) Brine

Description : Centrifugal pump made of pyrex or glass can't be used to pump (A) Milk and fruit juices (B) Alkaline solutions (C) Dilute H2SO4 at room temperature (D) Brine

Last Answer : (B) Alkaline solutions

Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Last Answer : (D) Activated carbon

Phosphoric acid is produced in wet process from phosphate rock and (A) Dilute H2SO4 (B) Concentrated H2SO4 (C) Concentrated NHO3 (D) Concentrated HCl

Description : Phosphoric acid is produced in wet process from phosphate rock and (A) Dilute H2SO4 (B) Concentrated H2SO4 (C) Concentrated NHO3 (D) Concentrated HCl

Last Answer : (A) Dilute H2SO4

Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone

Description : Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone

Last Answer : (B) Silica gel

Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon

Last Answer : (B) Limestone powder or alkalised alumina

Electrolysis of aqueous solution of Brine (NaCI) gives

Description : Electrolysis of aqueous solution of Brine (NaCI) gives

Last Answer : Electrolysis of aqueous solution of Brine (NaCI) gives A. (A)`Cl_2` B. (B) `H_2` C. (C) NaHO D. (D) all of these

Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Description : Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Last Answer : (B) Through circulation

At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

The sunlight is available 24 hours on the longest day at which of the following latitudes of the earth? (1) 49° (2) 66° (3) 63° (4) 69°51'

Description : The sunlight is available 24 hours on the longest day at which of the following latitudes of the earth? (1) 49° (2) 66° (3) 63° (4) 69°51'

Last Answer : (2) 66° Explanation: During the June solstice the Earth's North Pole is tilted 23.5 degrees towards the Sun relative to the circle of illumination. This phenomenon keeps all places above latitude of ... N in 24 hours of sunlight, while locations below latitude of 66.5 degrees are in darkness.

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer is `129 cm^(3) g^(-1)` of gel. Ca

Description : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer is `129 cm^(3) g^(-1)` of gel. Ca

Last Answer : The volume of nitrogen gas Um (measured at STP) required to cover a sample of silica get with a mono-molecular layer ... `16.2 xx 10^(-20) m^(2).`

__________ is obtained as a by-product in the manufacture of sodium hydroxide using brine. (A) Chlorine (B) Ammonium chloride (C) Sodium carbonate (D) Sodium bi-carbonate

Description : __________ is obtained as a by-product in the manufacture of sodium hydroxide using brine. (A) Chlorine (B) Ammonium chloride (C) Sodium carbonate (D) Sodium bi-carbonate

Last Answer : (A) Chlorine

When air passes through silica gel, A. it absorbs water vapour molecules B. latent heat of condensation is released C.dbt of air increases D. all of the mentioned

Description : When air passes through silica gel, A. it absorbs water vapour molecules B. latent heat of condensation is released C.dbt of air increases D. all of the mentioned

Last Answer : ANSWER : D

At which latitude, heat gain through insolation approximately equals heat loss through terrestrial radiation? (a) 22 1 2 ° North and South (b) 40° North and South (c) 42 1 2 ° North and South (d) 66° North and South

Description : At which latitude, heat gain through insolation approximately equals heat loss through terrestrial radiation? (a) 22 1 2 ° North and South (b) 40° North and South (c) 42 1 2 ° North and South (d) 66° North and South

Last Answer : (b) 40° North and South

Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap silica gel around the commutator. C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Description : Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap ... C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Last Answer : Answer: C

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay

Description : Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay

Last Answer : (A) Bone charcoal

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel

Description : Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel

Last Answer : (A) Co-Mo

Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel

Last Answer : (A) Reduced iron oxide

Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Last Answer : (A) Nickel

H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder

Description : H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder

Last Answer : (C) Bog iron

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel(C) Platinum(D) Nickel

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina

Last Answer : (A) Nickel

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Diatomaceous earth is a/an (A) Explosive (B) Filter aid (C) Filter medium (D) Catalyst

Description : Diatomaceous earth is a/an (A) Explosive (B) Filter aid (C) Filter medium (D) Catalyst

Last Answer : (B) Filter aid

__________ is the most commonly used 'filter aid'. (A) Diatomaceous earth (B) Fuller's earth (C) Vermiculite (D) Semi-plastic clay

Description : __________ is the most commonly used 'filter aid'. (A) Diatomaceous earth (B) Fuller's earth (C) Vermiculite (D) Semi-plastic clay

Last Answer : (A) Diatomaceous earth

Which one is a filter aid? (A) Canvas fabric (B) Diatomaceous earth (C) Calcined lime (D) None of these

Description : Which one is a filter aid? (A) Canvas fabric (B) Diatomaceous earth (C) Calcined lime (D) None of these

Last Answer : (B) Diatomaceous earth

Which of the following is not used as filter aid? (A) Asbestos (B) Diatomaceous earth (C) Purified wood cellulose (D) Rice husk

Description : Which of the following is not used as filter aid? (A) Asbestos (B) Diatomaceous earth (C) Purified wood cellulose (D) Rice husk

Last Answer : (D) Rice husk

Yellow glycerine is made into white, using (A) Activated carbon (B) Diatomaceous earth (C) Bauxite (D) Bentonite

Description : Yellow glycerine is made into white, using (A) Activated carbon (B) Diatomaceous earth (C) Bauxite (D) Bentonite

Last Answer : (A) Activated carbon

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

Can spraying alcohol or chlorine all over your body kill the new coronavirus? -Biology

Description : Can spraying alcohol or chlorine all over your body kill the new coronavirus? -Biology

Last Answer : No. Spraying alcohol or chlorine all over your body will not kill viruses that have already entered your body. Spraying such substances can be harmful to clothes or mucous membranes (i.e., ... chlorine can be useful to disinfect surfaces, but they need to be used under appropriate recommendations.

What is the color before using silica gel ?

Description : What is the color before using silica gel ?

Last Answer : Silica gel is brown or light in color before application.

Why is silica gel used in breeders ?

Description : Why is silica gel used in breeders ?

Last Answer : Answer : Silica gel absorbs fumes from the air as it enters the breather. It is a type of chemical substance.

Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Description : Which of the following is an absorbent? A.silica gel B. activated alumina C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : C

A 'breath test' used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium permanganate-sulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Description : A 'breath test' used by traffic police to check drunken driving uses: (1) potassium dichromate-sulphuric acid (2) potassium permanganate-sulphuric acid (3) turmeric on filter paper (4) silica gel coated with silver nitrate

Last Answer : (1) potassium dichromatesulphuric acid Explanation: The main constituent of alcohol is Ethanol and the concentration of ethanol in a sample can be determined by back titration with acidified potassium ... contact with the yellow dichromate-coated crystals, the color changes from yellow to green.

Silica gel is a - (1) moisturizer (2) flavouring agent (3) drying agent (4) delicious food

Description : Silica gel is a - (1) moisturizer (2) flavouring agent (3) drying agent (4) delicious food

Last Answer : (3) drying agent Explanation: Silica gel is a drying agent, meant to remove moisture from an enclosed space. It is a granular, vitreous, porous form of silicon dioxide made synthetically from ... bottles. The packets contain either granular silicic acid, which resembles sand, or tiny gel beads.

Why Silica gel is used in transformers?

Description : Why Silica gel is used in transformers?

Last Answer : Silica Gel is used to remove the moisture in the air entering in to the transformer. During the breathing of the transformer air enters in to the transformer. This air makes contact with the hot ... Silica gel crystals will be in blue color initially and after absorbing moisture it turns to pink.

What is the colour of silica gel in dry stage and when saturated with moisture in a breather?

Description : What is the colour of silica gel in dry stage and when saturated with moisture in a breather?

Last Answer : Dry stage – Deep blue Saturated stage – Whitish pink

Why silica gel is used in breather?

Description : Why silica gel is used in breather?

Last Answer : The silica gel is used to absorb the moisture when the air is drawn from the atmosphere in to the transformer.