One poise is equal to
(A) 0.1 N-s/m2
(B) 1 N-s/m2
(C) 10 N-s/m2
(D) 100 N-s/m2

1 Answer

Answer :

Answer: Option A

Related questions

Description : The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke

Last Answer : Answer: Option B

Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Last Answer : (A) The S.I. unit of dynamic viscosity

Description : One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Last Answer : (B) gm/cm. sec

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

Description : The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke

Last Answer : Answer: Option A

Description : One stoke is equal to (A) 10-2 m2 /s (B) 10-3 m2 /s (C) 10-4 m2 /s (D) 10-6 m2 /s

Last Answer : Answer: Option C

Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Last Answer : Answer: Option C

Description : Poise is the unit of (A) Surface tension (B) Capillarity (C) Viscosity (D) Shear stress in fluids

Last Answer : Answer: Option C

Description : Which of the following is the unit of kinematic viscosity? (A) Pascal (B) Poise (C) Stoke (D) Faraday

Last Answer : Answer: Option C

Description : The viscosity of water at 20°C is (A) One stoke (B) One centistoke (C) One poise (D) One centipoise

Last Answer : Answer: Option D

Description : A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke's law. A particle B with diameter 20microns settling in the same oil will have a settling velocity (A) ... ) One fourth as that of A (C) Twice as that of A (D) Four times as that of A

Last Answer : (B) One fourth as that of A

Description : The permissible diagonal tensile stress in reinforced brick work is (A) About 0.1 N/mm² (B) Zero (C) 0.3 N/mm² to 0.7 N/mm² (D) About 1.0 N/m2

Last Answer : Answer: Option A

Description : Stress may be expressed in Newtons  (A) Per millimetre square (N/mm2 )  (B) Per centimetre square (N/cm2 )  (C) Per metre square (N/m2 )  (D) None of these 

Last Answer : (A) Per millimetre square (N/mm2 )

Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the  base, has vertical water face. The minimum stress at the base of the dam when the reservoir is  full, will be  (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m

Last Answer : (C) 7500 N/m

Description : The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Last Answer : Answer: Option A

Description : The pressure measured with the help of a Piezometer tube is in (A) N/mm2 (B) N/m2 (C) Head of liquid (D) All of these

Last Answer : Answer: Option C

Description : The compressive strength an ordinary Portland cement (1:3) after 7 days test should not be less than. (a) 11N/mm2 (b) 17.5 N/mm2 (c) 22 N/mm2 (d) 27.5N/m2

Last Answer : (b) 17.5 N/mm2

Description : A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that  of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2  MN/mm2  and Eb = 0.1 ... 6 N/mm2 s  = 12 N/mm2 (D) b = 5 N/mm2 s  = 10 N/mm

Last Answer : (A) b = 10 N/mm2 s  = 20 N/mm

Description : The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Last Answer : Answer: C

Description : Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range  between  (A) 100 to 250  (B) 250 to 500  (C) 500 to 750  (D) 750 to 1000 

Last Answer : (C) 500 to 750 

Description : If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Last Answer : (C) 10 metres

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

Description : The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Last Answer : (C) N/m2

Description : What is the S.I. unit of torsional rigidity? a. Nm b. N.m2 c. Nm/ radian d. None of the above

Last Answer : b. N.m2

Description : According to the Snell's law if an electromagnetic wave is incident in a medium (refractive index n1) on another medium (refractive index m2); (A) The angle of incidence is equal to the angle of refraction (B) The angle of ... r) is given by sin i (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option B

Description : A 100 kg flywheel having a radius of gyration of 1 m is rotating at 1000 rpm. The angular momentum of the flywheel about its axis of rotation, in kg m2/s is a.1000 b.107 dynes c.10000 d.10470 e.5235

Last Answer : d. 10470

Description : Which of the following statement(s) is/are true concerning oxygen consumption (O2)? a. O2 is normally 100-120 cc2/m2/min b. Resting O2 is controlled by the level of thyroid and catecholamine ... of oxygen taken up by the pulmonary capillaries d. O2 is dependent on the status of pulmonary function

Last Answer : Answer: a, b Oxygen consumed in the process of metabolism is expressed as the volume of oxygen per minute (O2). O2 is normally 100-120 cc2/m2/min, or 200 cc/min for a typical adult. ... , so we measure O2 across the lung and assume that it is exactly the amount consumed in the systemic metabolism

Description : Poise is converted into stoke by (A) Multiplying with density (gm/c.c) (B) Dividing by density (gm/c.c) (C) Multiplying with specific gravity (D) Dividing by specific gravity

Last Answer : (B) Dividing by density (gm/c.c)

Description : The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Last Answer : (B) Water

Description : (Visual) Identify this gentleman, caricatured here by Al Hirschfeld, known for what Time magazine called “a sense of personal style, a combination of cheek and chic, pose and poise”.

Last Answer : Noël Coward.

Description : A Poise is the unit of measure of which of the following? w) pressure x) viscosity y) force z) mass

Last Answer : ANSWER: X -- VISCOSITY

Description : Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes

Last Answer : (C) 1 stoke = 1 m2/sec

Description : For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Last Answer : (B) ∞ N/m2

Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Last Answer : Answer : a

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Last Answer : Answer : c

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

Description : In a 100 quadrat study of 1 sqm each Cyperus rotundus was found in 80 quadrats with overall of 5640 individuals. The frequency (%), abun dance and density (m2) would be a). 70.5, 80.0 and 56.4 b). 56.4, 70.5 and 80.0 c). 80.0, 70.5 and 56.4 d). 80.0, 56.4 and 70.5

Last Answer : c). 80.0, 70.5 and 56.4

Description : The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Last Answer : Answer: Option C

Description : The atmospheric pressure at sea level is (A) 103 kN/m2 (B) 10.3 m of water (C) 760 mm of mercury (D) All of these

Last Answer : Answer: Option D

Description : Safe bearing capacity of black cotton soil varies from (A) 2 to 3 t/m2 (B) 5 to 7.5 t/m2 (C) 8 to 10 t/m2 (D) 10 to 12 t/m2

Last Answer : Answer: Option B

Description : For a given material Young's modulus is 200 GN/m2 and modulus of rigidity is 80 GN/m2 . The value of Poisson's ratio is (A) 0.15 (B) 0.20 (C) 0.25 (D) 0.30

Last Answer : (C) 0.25

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

Description : If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by (A) D = 0.00775 aP (B) D = 0.0775 aP (C) D = 0.07775 aP (D) D = 0.775 Pa

Last Answer : Answer: Option A