The unit of volumetric diffusivity is (A) cm2 /sec (B) cm/sec (C) cm3 /sec (D) cm2 /sec

The unit of volumetric diffusivity is

(A) cm2

/sec

(B) cm/sec

(C) cm3

/sec

(D) cm2

/sec


by

1 Answer

Answer :

(A) cm2

/sec

by

Related questions

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Description : The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Last Answer : (B) 10 -1 cm2 /sec

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Description : One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Last Answer : (B) gm/cm. sec

Unit of viscosity in CGS system is (A) gm .cm-1 sec-1 (B) gm . cm2 . sec-2 (C) gm .cm-2, sec-1 (D) gm . cm . sec-1

Description : Unit of viscosity in CGS system is (A) gm .cm-1 sec-1 (B) gm . cm2 . sec-2 (C) gm .cm-2, sec-1 (D) gm . cm . sec-1

Last Answer : Option A

Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)

Description : Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Wetted wall tower experiment determines the (A) Molal diffusivity (B) Volumetric co-efficient (C) Mass transfer co-efficient (D) None of these

Description : Wetted wall tower experiment determines the (A) Molal diffusivity (B) Volumetric co-efficient (C) Mass transfer co-efficient (D) None of these

Last Answer : (C) Mass transfer co-efficient

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Last Answer : (C) Is independent of pressure

A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Description : A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Last Answer : (A) 7

A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Description : A speaker cabinet has an internal volume 84,950 cm3 . It has a port area on the baffle of 3,230 cm2 and baffle thickness of 19 mm. What is the Helmholtz resonance hertz of this speaker enclosure? A. 260 Hz B. 245 Hz C. 265 Hz D. 250 Hz

Last Answer : B. 245 Hz

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

A soil has bulk density 2.30 g/cm3 and water content 15 per cent, the dry density of the sample, is (A) 1.0 g/cm2 (B) 1.5 g/cm3 (C) 2.0 g/cm3 (D) 2.5 g/cm3

Description : A soil has bulk density 2.30 g/cm3 and water content 15 per cent, the dry density of the sample, is (A) 1.0 g/cm2 (B) 1.5 g/cm3 (C) 2.0 g/cm3 (D) 2.5 g/cm3

Last Answer : (C) 2.0 g/cm3

Liquid diffusivity is of the order of __________ cm2 /second. (A) 0.01 (B) 0.1 (C) 10 -5 to 10 -6 (D) > 1

Description : Liquid diffusivity is of the order of __________ cm2 /second. (A) 0.01 (B) 0.1 (C) 10 -5 to 10 -6 (D) > 1

Last Answer : (C) 10 -5 to 10

Gaseous diffusivity at atmospheric pressure is of the order of __________ cm2 /second. (A) 1 (B) 1 to 5 (C) 5 to 10 (D) > 10

Description : Gaseous diffusivity at atmospheric pressure is of the order of __________ cm2 /second. (A) 1 (B) 1 to 5 (C) 5 to 10 (D) > 10

Last Answer : (A) 1

The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Description : The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Last Answer : (A) cm/sec

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

The unit of specific cake resistance is (A) gm/cm2 (B) cm/gm (C) cm/gm2 (D) gm/gm

Description : The unit of specific cake resistance is (A) gm/cm2 (B) cm/gm (C) cm/gm2 (D) gm/gm

Last Answer : (A) gm/cm2 (

. One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Last Answer : (A) 1 cm2 /second

Research reactors are normally meant for (A) Producing high neutron flux 10 12 -10 13 neutrons/cm2 , sec and studying the effect of neutron bombardment on different materials (B) Accelerating the neutrons (C) Power generation (D) None of these

Description : Research reactors are normally meant for (A) Producing high neutron flux 10 12 -10 13 neutrons/cm2 , sec and studying the effect of neutron bombardment on different materials (B) Accelerating the neutrons (C) Power generation (D) None of these

Last Answer : (A) Producing high neutron flux 10 12 -10 13 neutrons/cm2 , sec and studying the effect of neutron bombardment on different materials

The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm2 /sec. (A) 0.25 (B) 2.5 (C) 1.25 (D) 0.0025

Description : The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm2 /sec. (A) 0.25 (B) 2.5 (C) 1.25 (D) 0.0025

Last Answer : (A) 0.25

Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes

Description : Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes

Last Answer : (C) 1 stoke = 1 m2/sec

A cylindrical vessel can hold 154 g of water. If the radius of its base is 3.5 cm, and 1 cm3 of water weighs lg,find the depth of water. -Maths 9th

Description : A cylindrical vessel can hold 154 g of water. If the radius of its base is 3.5 cm, and 1 cm3 of water weighs lg,find the depth of water. -Maths 9th

Last Answer : Since 1 cm3 of water weighs 1 g. ∴ Volume of cyclinder vessel = 154 cm3 πr2h = 154 h = 154 × 7 / 22 × 3.5 × 3.5 h ;= 4 cm Hence, the depth of water is 4 cm.

A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Description : A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Last Answer : We have, the radius of a metallic sphere (r) = 4.9 cm ∴ Volume of the sphere = 4 / 3 πr3 = 4 / 3 × 22 / 7 × 4.9 × 4.9 × 4.9 = 493.005 cm3 ∵ Density of the metal used = 7.8 g/cm3 Hence, the mass of the shot - put = 493.005 × 7.8 = 3845.44

A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Description : A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Last Answer : We have, the radius of a metallic sphere (r) = 4.9 cm ∴ Volume of the sphere = 4 / 3 πr3 = 4 / 3 × 22 / 7 × 4.9 × 4.9 × 4.9 = 493.005 cm3 ∵ Density of the metal used = 7.8 g/cm3 Hence, the mass of the shot - put = 493.005 × 7.8 = 3845.44

A cylindrical vessel can hold 154 g of water. If the radius of its base is 3.5 cm, and 1 cm3 of water weighs lg,find the depth of water. -Maths 9th

Description : A cylindrical vessel can hold 154 g of water. If the radius of its base is 3.5 cm, and 1 cm3 of water weighs lg,find the depth of water. -Maths 9th

Last Answer : Since 1 cm3 of water weighs 1 g. ∴ Volume of cyclinder vessel = 154 cm3 πr2h = 154 h = 154 × 7 / 22 × 3.5 × 3.5 h ;= 4 cm Hence, the depth of water is 4 cm.

A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is: (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2  MN/mm2  and Poisson's ratio is 0.25, the change in the volume of the bar is:  (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Last Answer : (C) 3.125 cm

The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Description : The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Last Answer : ANSWER: Y -- BETWEEN 25 AND 50% HOLLOW

The radius and height of a right circular cylinder are 42 cm & 63 cm respectively. Find its volume. a) 237564 cm3 b) 349272 cm3 c) 379252 cm3 d) 453213cm3

Description : The radius and height of a right circular cylinder are 42 cm & 63 cm respectively. Find its volume. a) 237564 cm3 b) 349272 cm3 c) 379252 cm3 d) 453213 cm3

Last Answer :  Answer: B 

The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Last Answer : (B) 55.6 %

A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Last Answer : Answer: Option C

Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Description : Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Last Answer : (B) Heat flux

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

Multistage compression of air as compared to single stage compression offers the advantage of (A) Power saving per unit weight of air delivered (B) Moisture elimination in the inter-stage cooler (C) Increased volumetric efficiency (D) All (A), (B) & (C)

Description : Multistage compression of air as compared to single stage compression offers the advantage of (A) Power saving per unit weight of air delivered (B) Moisture elimination in the inter-stage cooler (C) Increased volumetric efficiency (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

Absorption/scattering cross-section of an element is expressed in "barn", which is equivalent to (A) 10 -24 cm2 (B) 10 -12 cm (C) 1 Angstrom (D) 10 -24 cm

Description : Absorption/scattering cross-section of an element is expressed in "barn", which is equivalent to (A) 10 -24 cm2 (B) 10 -12 cm (C) 1 Angstrom (D) 10 -24 cm

Last Answer : (A) 10 -24 cm

200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Description : 200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Last Answer : (C) inch

The effectiveness factor for large value of Thiele modulus [L√(K/D1 )] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2 /second). (A) L √(K/D1 ) (B) 1/[L√(K/D1 )] (C) 1 (D) ∞

Description : The effectiveness factor for large value of Thiele modulus [L√(K/D1 )] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2 /second). (A) L √(K/D1 ) (B) 1/[L√(K/D1 )] (C) 1 (D) ∞

Last Answer : (B) 1/[L√(K/D1 )]

For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm3 and that in vapour phase in 391.1 cm3.Fugacity of water (in kPa) at 9000 kPa will be (A) 6738.9 (B) 6753.5 (C) 7058.3 (D) 9000

Description : For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm3 and that in vapour phase in 391.1 cm3.Fugacity of water (in kPa) at 9000 kPa will be (A) 6738.9 (B) 6753.5 (C) 7058.3 (D) 9000

Last Answer : (B) 6753.5

Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Description : Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find (i) radius of the base -Maths 9th

Last Answer : Slant height of cone, l = 14 cm Let the radius of the cone be r. (i) We know, CSA of cone = πrl Given: Curved surface area of a cone is 308 cm2 (308 ) = (22/7) r 14 308 = 44 r r = 308 ... Total surface area of cone = 308+(22/7) 72 = 308+154 Therefore, the total surface area of the cone is 462 cm2.

The curved surface area of a right circular cylinder of height 14 cm is 88 cm2. Find the diameter of the base of the cylinder. (Assume π =22/7 ) -Maths 9th

Description : The curved surface area of a right circular cylinder of height 14 cm is 88 cm2. Find the diameter of the base of the cylinder. (Assume π =22/7 ) -Maths 9th

Last Answer : Height of cylinder, h = 14cm Let the diameter of the cylinder be d Curved surface area of cylinder = 88 cm2 We know that, formula to find Curved surface area of cylinder is 2πrh. So 2πrh =88 cm2 (r is the ... 88 cm2 2r = 2 cm d =2 cm Therefore, the diameter of the base of the cylinder is 2 cm.

The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Description : The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Last Answer : Let the length of one parallel side of trapezium is a. So length of other parallel side = a + 4 Given the area of trapezium = 475 & the height = 19 Now area of a trapezium = 21 height ... =23∴Length of smalle rparallel side of trapezium =23 & Length of other parallel side of trapezium = 23+4=27

The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Description : The area of a trapezium is 475 cm2 and the height is 19 cm. -Maths 9th

Last Answer : According to question find the lengths of its two parallel sides

The area of a rhombus 10 cm2 .If one if its diagonal is 4 cm,then find the other diagonal. -Maths 9th

Description : The area of a rhombus 10 cm2 .If one if its diagonal is 4 cm,then find the other diagonal. -Maths 9th

Last Answer : hope its clear

If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Description : If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Last Answer : It is 3 cm high.

If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Description : If the surface area of a box is 52 cm2 and you know that it is 4 cm wide and 2 cm long what is the height of the box (Hint Use the perimeter of the base to find the answer.)?

Last Answer : It is 3 cm high.

ΔABC ~ ΔPQR. Area of ΔABC = 81 cm2 and area of ΔPQR =121 cm2. If altitudeAD = 9 cm, then PM is equal to (a) 9 cm (b) 11 cm (c) 10cm (d) None of these

Description : ΔABC ~ ΔPQR. Area of ΔABC = 81 cm2 and area of ΔPQR =121 cm2. If altitudeAD = 9 cm, then PM is equal to (a) 9 cm (b) 11 cm (c) 10cm (d) None of these

Last Answer : (b) 11 cm

The maximum pressure to which cast iron pipes may be subjected to, is (A) 3 kg/cm2 (B) 5 kg/cm2 (C) 7 kg/cm2 (D) 10 kg/cm

Description : The maximum pressure to which cast iron pipes may be subjected to, is  (A) 3 kg/cm2 (B) 5 kg/cm2 (C) 7 kg/cm2 (D) 10 kg/cm

Last Answer : (C) 7 kg/cm