Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)

Thermal diffusivity of a material
(A) Has the unit m2
/sec
(B) Is defined as K/ρ . Cp
(C) Is the ratio of thermal conductivity to thermal capacity
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

The Schmidt number which is defined as, μ/ρ D, is the ratio of the (A) Momentum diffusivity to the mass diffusivity (B) Thermal diffusivity to the mass diffusivity (C) Momentum diffusivity to the thermal diffusivity (D) None of these

Description : The Schmidt number which is defined as, μ/ρ D, is the ratio of the (A) Momentum diffusivity to the mass diffusivity (B) Thermal diffusivity to the mass diffusivity (C) Momentum diffusivity to the thermal diffusivity (D) None of these

Last Answer : (A) Momentum diffusivity to the mass diffusivity

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

Thermal diffusivity of a substance is proportional to (where, k = Thermal conductivity) (A) 1/k (B) k (C) k2 (D) 1/k2

Description : Thermal diffusivity of a substance is proportional to (where, k = Thermal conductivity) (A) 1/k (B) k (C) k2 (D) 1/k2

Last Answer : (B) k

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Description : Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Last Answer : (B) Heat flux

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

Velocity of a gas in sound is not proportional to (where, T = Absolute temperature of the gas. P = Absolute pressure of the gas. y = Ratio of specific heats (Cp/Cv) ρ = specific weight of the gas) (A) √T (B) 1/√P (C) √y (D) 1/√ρ

Description : Velocity of a gas in sound is not proportional to (where, T = Absolute temperature of the gas. P = Absolute pressure of the gas. y = Ratio of specific heats (Cp/Cv) ρ = specific weight of the gas) (A) √T (B) 1/√P (C) √y (D) 1/√ρ

Last Answer : (B) 1/√P

What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Description : What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Last Answer : (B) Kcal/hr.m.°C

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Description : In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Last Answer : (C) Thermal conductivity

A bimetallic strip commonly found in home furnace thermostats works because of the difference in this property of the two metals. Is it: w) thermal shock x) thermal conductivity y) thermal expansion z) thermal diffusivity

Description : A bimetallic strip commonly found in home furnace thermostats works because of the difference in this property of the two metals. Is it: w) thermal shock x) thermal conductivity y) thermal expansion z) thermal diffusivity

Last Answer : ANSWER: Y -- THERMAL EXPANSION

In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Description : In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Last Answer : (A) Watt/m.°K

The unit of volumetric diffusivity is (A) cm2 /sec (B) cm/sec (C) cm3 /sec (D) cm2 /sec

Description : The unit of volumetric diffusivity is (A) cm2 /sec (B) cm/sec (C) cm3 /sec (D) cm2 /sec

Last Answer : (A) cm2 /sec

ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Description : ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Last Answer : Option D

Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Description : Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Last Answer : (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

Which solid material has a high heat capacity but low thermal conductivity?

Description : Which solid material has a high heat capacity but low thermal conductivity?

Last Answer : https://en.wikipedia.org/wiki/Thermal_barrier_coating

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Description : A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Last Answer : (A) 7

Specific capacity or yield of wells, is generally expressed, as (A) m 3 per sec (B) m 3 /hour (C) m 3 /hour/m2 (D) m 3 /hour/m2 /m

Description : Specific capacity or yield of wells, is generally expressed, as  (A) m 3  per sec  (B) m 3 /hour  (C) m 3 /hour/m2 (D) m 3 /hour/m2 /m 

Last Answer : (D) m 3 /hour/m2 /m 

Lewis number, which is important in problems involving simultaneous heat and mass transfer, is the ratio of (A) Mass diffusivity to momentum diffusivity (B) Thermal diffusivity to mass diffusivity (C) Momentum diffusivity to thermal diffusivity (D) None of these

Description : Lewis number, which is important in problems involving simultaneous heat and mass transfer, is the ratio of (A) Mass diffusivity to momentum diffusivity (B) Thermal diffusivity to mass diffusivity (C) Momentum diffusivity to thermal diffusivity (D) None of these

Last Answer : (B) Thermal diffusivity to mass diffusivity

Prandtl number is the ratio of (A) Mass diffusivity to thermal diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Description : Prandtl number is the ratio of (A) Mass diffusivity to thermal diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Last Answer : (B) Momentum diffusivity to thermal diffusivity

The ratio of momentum diffusivity to thermal diffusivity is the __________ number. (A) Prandtl (B) Nusselt (C) Stanton (D) Grashoff

Description : The ratio of momentum diffusivity to thermal diffusivity is the __________ number. (A) Prandtl (B) Nusselt (C) Stanton (D) Grashoff

Last Answer : (A) Prandtl

The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Description : The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Last Answer : (B) Prandtl

Prandtl number is the ratio of (A) Momentum diffusivity to mass diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Description : Prandtl number is the ratio of (A) Momentum diffusivity to mass diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Last Answer : (B) Momentum diffusivity to thermal diffusivity

The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Description : The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Last Answer : (A) kg/m. sec

One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Description : One poise (unit of absolute/dynamic viscosity) is equivalent to one (A) gm/cm2 . sec (B) gm/cm. sec (C) cm2 /sec (D) m2 /sec

Last Answer : (B) gm/cm. sec

The thermal radiative flux from a surface of emissivity = 0.4 is 22.68 kW/m2 . The approximate surface temperature (K) is (Stefan-Boltzmann constant = 5.67 × 10 -8 W/m2 .K4 )(A) 1000(B) 727(C) 800(D) 1200

Description : The thermal radiative flux from a surface of emissivity = 0.4 is 22.68 kW/m2 . The approximate surface temperature (K) is (Stefan-Boltzmann constant = 5.67 × 10 -8 W/m2 .K4 ) (A) 1000 (B) 727 (C) 800 (D) 1200

Last Answer : (A) 1000

The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Description : The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Last Answer : (B) 10 -1 cm2 /sec

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Description : Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Last Answer : (B) Density

Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock(D) All (A), (B) and (C)

Description : Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Heat required to raise the temperature of a body by 1 °C is called its (A) Heat capacity (B) Specific heat capacity (C) Thermal conductivity (D) Water equivalent

Description : Heat required to raise the temperature of a body by 1 °C is called its (A) Heat capacity (B) Specific heat capacity (C) Thermal conductivity (D) Water equivalent

Last Answer : (A) Heat capacity

The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be (A) W/m.k (B) W/m (C) W/m.k

Description : The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be (A) W/m.k (B) W/m (C) W/m.k

Last Answer : (C) W/m.k

Conductance is given by (where, x = thickness, A = heat flow area, K = thermal conductivity.) (A) x/KA (B) KA/x (C) K/Ax (D) A/Kx

Description : Conductance is given by (where, x = thickness, A = heat flow area, K = thermal conductivity.) (A) x/KA (B) KA/x (C) K/Ax (D) A/Kx

Last Answer : (B) KA/x

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Description : One face of a furnace wall is at 1030°C and the other face is exposed to room temperature (30°C). If the thermal conductivity of furnace wall is 3 W. m-1. k-1 and the wall thickness is 0.3 m, the maximum heat loss (in W/m) is (A) 100 (B) 900 (C) 9000 (D) 10000

Last Answer : (D) 10000

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ ... (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Last Answer : (C) Linear

Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)