Description : Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above
Last Answer : 200 photons
Description : The cheapest modems cantransmit A. 300 bits per second B. 1,200 bitsper second C. 2,400 bits per second D. 4,800 bits per second E. None of the above
Last Answer : 300 bits per second
Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode
Last Answer : Avalanche photodiode
Last Answer : D. Avalanche photodiode
Description : Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode
Last Answer : ∙ d. Avalanche photodiode
Description : Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode
Last Answer : ∙ b. Photovoltaic diode
Description : APD stands for: a. Avalanche Photodiode b. Advanced Photodiode c. Avalanche Photo Detector d. Advanced Photo Detector
Last Answer : a. Avalanche Photodiode
Description : Draw the construction of Avalanche photodiode. State its working principle.
Last Answer : Avalanche photodiode are used to obtain the large gain, i.e. large output because Conventional photodiodes and PIN photodiodes obtain the limited gain. CONSTRUCTION: APD's are usually variation ... in avalanche with the number of carriers growing exponentially as the process continues.
Description : The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application
Last Answer : a. presentation
Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200
Last Answer : b. 800
Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500
Last Answer : a. 2500
Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above
Last Answer : b. CRC
Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms
Last Answer : c. 1+x is a factor of G(x)
Description : What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers? A. 16 B. 9 C. 8 D. 4 E. None of the above
Last Answer : 9
Description : Which of the following is not correct in relation to multi-destination routing? a. is same as broadcast routing b. contains the list of all destinations c. data is not sent by packets d. there are multiple receivers
Last Answer : c. data is not sent by packets
Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800
Last Answer : c. 400
Description : The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml
Last Answer : Answer : C
Description : Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100
Last Answer : d) 100
Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000
Last Answer : d. 20000
Description : Radar is used to (1) locate submerged submarines. (2) receive signal from radio receivers. (3) detect and locate distant objects. (4) locate geostationary satellites.
Last Answer : detect and locate distant objects
Description : Geiger-Muller counter is used to detect-----? A. Protons (Answer) B. Neutrons C. Photons D. none
Last Answer : A. Protons (Answer)
Description : If the baudrate fora 64-QAM signal is 2000, what is the bit rate? A) 300 B) 400 C) 1000 D) 12000
Last Answer : 12000
Description : Which of the following statement is incorrect? A. The Addresses Resolution Protocol, ARP, allows a host to find the physicaladdress ofa target host on the samephysical network, given only the target IP address. ... -addresses of our choice to every machine. D. All of theabove E. None of the above
Last Answer : All of theabove
Description : Which of the following is correct IPv4 address? a. 124.201.3.1.52 b. 01.200.128.123 c. 300.142.210.64 d. 128.64.0.0
Last Answer : d. 128.64.0.0
Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above
Last Answer : can do one way data transmission only
Description : The technique in which a congested node stops receiving data from the immediate upstream node or nodes is called as _______ A. Admission policy B. Backpressure C. Forward signaling D. Backward signaling
Last Answer : B. Backpressure
Description : a computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as a. Super computer b. Mini computer c. Micro computer d. Macro computer
Last Answer : Super computer
Description : A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above
Last Answer : none of above
Description : Consider a source computer(S) transmitting a file of size 106 bits to a destination computer (D)over a network of two routers (R1 and R2) and three links(L1, L2, and L3). L1connects S to R1; L2 connects R1 to ... file from S to D? a. 1005 ms b. 1010 ms c. 3000 ms d. 3003 ms Answer: Option(a)
Last Answer : a. 1005 ms
Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256
Last Answer : d. 256
Description : The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500
Last Answer : (C) 2000-2200
Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3
Last Answer : [ C ] 450 kg/m3
Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above
Last Answer : they contain clock recovery circuits
Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : DSSS
Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above
Last Answer : isochronous
Description : A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps
Last Answer : 6 Kbps
Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above
Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C
Last Answer : B) Baud
Description : The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation
Last Answer : A) Physical
Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes
Last Answer : c. packets
Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes
Last Answer : b. 12,000 bytes
Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5
Last Answer : b. 2
Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error
Last Answer : b. burst error
Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session
Last Answer : A. Data Link
Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes
Last Answer : C. packets
Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error
Last Answer : B. burst error
Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes
Last Answer : c) packets
Description : Before data can be transmitted, they must be transformed to________. A) periodic signals B) electromagnetic signals C) aperiodic signals D) low-frequency sine waves
Last Answer : electromagnetic signals