In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime

In SONET, for each byte, the bitsare transmitted ____________.
A)
from least significant to the most significant
B)
from most significant tothe least significant
C)
two at atime
D)
three at atime
by

1 Answer

Answer :

from least significant to the most significant
by

Related questions

Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Description : Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Last Answer : byte

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above

Description : The communication modethat supports two-way traffic but only one direction at atime is A. simplex B. duplex C. half duplex D. multiplex E. None of the above

Last Answer : half duplex

In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above

Description : In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above

Last Answer : 64

In Bluetooth, the_____layer is roughlyequivalent tothe MAC sublayer in LANs. A) radio B) baseband C) L2CAP D) none of the above

Description : In Bluetooth, the_____layer is roughlyequivalent tothe MAC sublayer in LANs. A) radio B) baseband C) L2CAP D) none of the above

Last Answer : baseband

In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Description : In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Last Answer : link local

In classless addressing, the _______ is the varying part (similar tothe hostid). A) suffix B) prefix C) hostid D) none of the above

Description : In classless addressing, the _______ is the varying part (similar tothe hostid). A) suffix B) prefix C) hostid D) none of the above

Last Answer : suffix

Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Description : Data integrity control A. is used to set upper and lower limits on numeric data B. requires the use of passwords toprohibit unauthorized access tothe file C. has the data dictionary keep thedate and time ... back-up,and most recent modificationfor all files D. All of theabove E. None of the above

Last Answer : has the data dictionary keep thedate and time of lastaccess last back-up,and most recent modificationfor all files

_____ refers tothe structure or format of the data, meaning the order in which they are presented. A) Semantics B) Syntax C) Timing D) All of theabove

Description : _____ refers tothe structure or format of the data, meaning the order in which they are presented. A) Semantics B) Syntax C) Timing D) All of theabove

Last Answer : Syntax

Carrier is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. the condition whentwo or more sections attempt to use the same channel at the same time D. a collection of interconnected functional units that provides a data communications service among stations attached tothe network E. None of the above

Description : Carrier is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. ... that provides a data communications service among stations attached tothe network E. None of the above

Last Answer : a continuous frequency capableof being modulated or impressed witha second signa

Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for multiple access transmission media C. a form of TDMA in which circuit switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

Contention is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. the condition whentwo or more stations attempt to use the same channel at the same time D. a collection of interconnected functional units that provides a data communications service among stations attached tothe network E. None of the above

Description : Contention is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. ... that provides a data communications service among stations attached tothe network E. None of the above

Last Answer : the condition whentwo or more stations attempt to use the same channel at the same time

The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine and the InternetProtocol Software on another C. reports error conditions tothe original source, the source must relate errors to individual applicationprograms and takeaction to correct theproblem D. All of theabove E. None of the above

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

To make SONET backward-compatible with the current hierarchy, its framedesign includes asystem of. A) OCs B) STMs C) STSs D) VTs

Description : To make SONET backward-compatible with the current hierarchy, its framedesign includes asystem of. A) OCs B) STMs C) STSs D) VTs

Last Answer : VTs

A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Last Answer : bidirectional.

A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Last Answer : point-to-point

SONET network topologies can be__________. A) linear B) ring C) mesh D) all of theabove

Description : SONET network topologies can be__________. A) linear B) ring C) mesh D) all of theabove

Last Answer : ring

SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000

Description : SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000

Last Answer : 2000

A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Description : A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Last Answer : add/drop multiplexers

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

SONET defines _______ layers. A) twoB)threeC)fourD)five

Description : SONET defines _______ layers. A) two B) three C) four D) five

Last Answer : four

______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : either (a) or (b)

isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above

Last Answer : 48-b

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Description : The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Last Answer : Data density

A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Last Answer : 4 byte

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

Which of the following magazines covers only the IBM PC and its compatibles? a. Byte b. PC Magazine c. Personal Computing d. Interface Age

Description : Which of the following magazines covers only the IBM PC and its compatibles? a. Byte b. PC Magazine c. Personal Computing d. Interface Age

Last Answer : PC Magazine

A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Description : A name or number used to identify a storage location devices? a. A byte b. A record c. An address d. All of above

Last Answer : An address

A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Description : A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Last Answer : none of above

The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : byte-oriented

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

In IPv4, what is needed to determine thenumber of the last byte of a fragment? A) Identification number B) Offset number C) Total length D) (b) and (c)

Description : In IPv4, what is needed to determine thenumber of the last byte of a fragment? A) Identification number B) Offset number C) Total length D) (b) and (c)

Last Answer : (b) and (c)

In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

Description : In IPv4, if the fragment offset hasa value of 100, it means that _______. A) thedatagram has notbeen fragmented B) thedatagram is 100 bytes in size C) thefirst byte of the datagram is byte100 D) the first byteof the datagram is byte800

Last Answer : the first byteof the datagram is byte800

An ICMP message has _____ headerand a variable-size data section. A) a 16-byte B) a 32-byte C) an 8-byteD) noneof the above

Description : An ICMP message has _____ headerand a variable-size data section. A) a 16-byte B) a 32-byte C) an 8-byte D) noneof the above

Last Answer : an 8-byte

The computer abbreviation KB usually means– (A) Key Block (B) Kernel Boot (C) Key Byte (D) Kit Bit (E) Kilo Byte

Description : The computer abbreviation KB usually means– (A) Key Block (B) Kernel Boot (C) Key Byte (D) Kit Bit (E) Kilo Byte

Last Answer : Kilo Byte

Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Description : Transport layer can identify the symptoms of overload nodes using _________ a. Flow control b. Traffic control c. Byte orientation d. Data integrity

Last Answer : b. Traffic control

Buffer overrun can be reduced by using what? a. Traffic control b. Flow control c. Byte orientation d. Data integrity

Description : Buffer overrun can be reduced by using what? a. Traffic control b. Flow control c. Byte orientation d. Data integrity

Last Answer : b. Flow control

Which form of byte assigning strategy is adopted in class B type of network corresponding to IP addresses? a. Network.Node.Node.Node b. Network.Network.Node.Node c. Network.Network.Network.Node d. Network.Node.Node.Node

Description : Which form of byte assigning strategy is adopted in class B type of network corresponding to IP addresses? a. Network.Node.Node.Node b. Network.Network.Node.Node c. Network.Network.Network.Node d. Network.Node.Node.Node

Last Answer : b. Network.Network.Node.Node

A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Description : A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Last Answer : c. network address & host address

Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B is 128 kbps. What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit

Last Answer : a. 1 byte