Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B) The co-efficient of contraction of a Venturimeter is always unity (C) For a fixed pressure drop, the discharge of a gas through a Venturimeter is greater, when compressibility is taken into account, than when it is neglected (D) None of these

Pick out the correct statement pertaining to Venturimeter.
(A) A Venturimeter with a fixed pressure drop discharges more, when the
flow is vertically downward, than when the flow is vertically upward
(B) The co-efficient of contraction of a Venturimeter is always unity
(C) For a fixed pressure drop, the discharge of a gas through a Venturimeter
is greater, when compressibility is taken into account, than when it is neglected
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

The discharge through a Venturimeter depends upon (A) Pressure drop only (B) Its orientation (C) Co-efficient of contraction only (D) None of these

Description : The discharge through a Venturimeter depends upon (A) Pressure drop only (B) Its orientation (C) Co-efficient of contraction only (D) None of these

Last Answer : (A) Pressure drop only

Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube when the Mach number at exit is greater than unity (C) Throughout the converging portion of the tube, the density increases in the downstream direction (D) None of these

Description : Pick out the correct statement pertaining to the flow through a converging-diverging tube. (A) The value of Mach number is always unity at the throat (B) No shock wave develops in the tube ... the converging portion of the tube, the density increases in the downstream direction (D) None of these

Last Answer : (B) No shock wave develops in the tube when the Mach number at exit is greater than unity

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

Cd , Cc and Cv are related (for flow through an orifice) as (where, Cd = discharge co-efficient, Cc = co-efficient of contraction = (area of jet at vena￾contracta/area of opening), Cv = co-efficient of velocity = (actual velocity at vena-contracta/theoretical velocity). (A) Cd = Cc /Cv (B) Cd = Cc .Cv (C) Cd = Cv / Cc (D) None of these

Description : Cd , Cc and Cv are related (for flow through an orifice) as (where, Cd = discharge co-efficient, Cc = co-efficient of contraction = (area of jet at vena￾contracta/area of opening), Cv = co-efficient of velocity = (actual velocity ... A) Cd = Cc /Cv (B) Cd = Cc .Cv (C) Cd = Cv / Cc (D) None of these

Last Answer : (B) Cd = Cc .Cv

Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed column, but the liquid hold up is more in the case of plate column (C) For the same duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed ... duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow centrifugal pump, the impeller discharges into a gradually expanding spiral casing (C) The efficiency of turbine type of radial flow centrifugal pump, is always higher than that of volute type (D) All the above

Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps:  (A) These are provided with volute type or turbine type casings  (B) In involute type of radial flow ... centrifugal pump, is always higher than that of  volute type  (D) All the above 

Last Answer : (D) All the above 

An exceptional demand curve is one that moves - (1) upward to the right (2) downward to the right (3) horizontally (4) vertically

Description : An exceptional demand curve is one that moves - (1) upward to the right (2) downward to the right (3) horizontally (4) vertically

Last Answer : (2) downward to the right Explanation: A demand curve that violates the law of demand is termed an exceptional demand curve. If a household expects the price of a commodity to increase, it may ... backward slope from the top right to down left. This curve is known as an exceptional demand curve.

A particle is thrown vertically upward. When it reaches the highest point, it has – (1) a downward acceleration (2) an upward acceleration (3) a downward velocity (4) a horizontal velocity

Description : A particle is thrown vertically upward. When it reaches the highest point, it has – (1) a downward acceleration (2) an upward acceleration (3) a downward velocity (4) a horizontal velocity

Last Answer : (1) a downward acceleration Explanation: When a particle is thrown vertically upwards in space, it will experience constant acceleration towards the ground (irrespective of the direction in which it ... point, it has zero velocity but has downward acceleration equal to acceleration due to gravity.

An object is projected vertically upward near the surface of the earth. At the very top of its path, the object's velocity is zero, and its acceleration is: w) 0 x) 9.8 meters per second squared DOWNWARD y) 9.8 meters per second squared UPWARD z) depends on the mass of the object

Description : An object is projected vertically upward near the surface of the earth. At the very top of its path, the object's velocity is zero, and its acceleration is: w) 0 x) 9.8 meters per second squared DOWNWARD y) 9.8 meters per second squared UPWARD z) depends on the mass of the object

Last Answer : ANSWER: X -- 9.8 METERS PER SECOND SQUARED DOWNWARD

A boy is standing on an elevator which is traveling downward with a constant velocity of 30 meters per second. The boy throws a ball vertically upward with a velocity of 10 meters per second relative to the elevator. What is the velocity of the ball, MAGNITUDE AND DIRECTION, relative to the elevator shaft the instant the boy releases the ball?

Description : A boy is standing on an elevator which is traveling downward with a constant velocity of 30 meters per second. The boy throws a ball vertically upward with a velocity of 10 meters per second ... the ball, MAGNITUDE AND DIRECTION, relative to the elevator shaft the instant the boy releases the ball?

Last Answer : ANSWER: 20 METERS PER SECOND DOWN

A particle is thrown vertically upward. When it reaches the highest point, it has (1) a downward acceleration (2) an upward acceleration (3) a downward velocity (4) a horizontal velocity

Description : A particle is thrown vertically upward. When it reaches the highest point, it has (1) a downward acceleration (2) an upward acceleration (3) a downward velocity (4) a horizontal velocity

Last Answer : a downward acceleration

An exceptional demand curve is one that moves (1) upward to the right (2) downward to the right (3) horizontally (4) vertically

Description : An exceptional demand curve is one that moves (1) upward to the right (2) downward to the right (3) horizontally (4) vertically

Last Answer : downward to the right

In which of the following cases, it is possible for flow to occur from low pressure to high pressure? (A) Flow of liquid upward in a vertical pipe (B) Flow through a converging section (C) Flow of air downward in a pipe (D) Impossible in a constant cross-section conduit

Description : In which of the following cases, it is possible for flow to occur from low pressure to high pressure? (A) Flow of liquid upward in a vertical pipe (B) Flow through a converging section (C) Flow of air downward in a pipe (D) Impossible in a constant cross-section conduit

Last Answer : (B) Flow through a converging section

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Description : Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Last Answer : (B) 0.62

Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Description : Co-efficient of discharge (Cd ) is defined as actual discharge/theoretical discharge and is equal to Cc . Cv ; where Cc = Co-efficient of contraction and Cv = co-efficient of velocity. Cd of an orifice is usually about (A) 0.42 (B) 0.62 (C) 0.82 (D) 0.98

Last Answer : (B) 0.62

In case of flow through parallel pipes, (A) The head loss for all the pipes is same (B) The total discharge is equal to the sum of discharges in the various pipes (C) The total head loss is the sum of head losses in the various pipes (D) Both (A) and (B)

Description : In case of flow through parallel pipes, (A) The head loss for all the pipes is same (B) The total discharge is equal to the sum of discharges in the various pipes (C) The total head loss is the sum of head losses in the various pipes (D) Both (A) and (B)

Last Answer : Answer: Option D

In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Description : In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Last Answer : (B) Flows outside the tubes

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

The total discharge from two wells situated near to each other is(A) Sum of the discharges from individual wells (B) Less than the sum of the discharges from individual wells (C) Greater than the sum of the discharges from individual wells (D) Equal to larger of the two discharges from individual wells

Description : The total discharge from two wells situated near to each other is (A) Sum of the discharges from individual wells (B) Less than the sum of the discharges from individual wells (C) Greater ... of the discharges from individual wells (D) Equal to larger of the two discharges from individual wells

Last Answer : (B) Less than the sum of the discharges from individual wells

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

For measuring flow by a Venturimeter, if should be installed in (A) Vertical line (B) Horizontal line (C) Inclined line with flow downward (D) In any direction and in any location

Description : For measuring flow by a Venturimeter, if should be installed in (A) Vertical line (B) Horizontal line (C) Inclined line with flow downward (D) In any direction and in any location

Last Answer : Answer: Option D

Compressibility factor of a gas is (A) Not a function of its pressure (B) Not a function of its nature (C) Not a function of its temperature (D) Unity, if it follows PV = nRT

Description : Compressibility factor of a gas is (A) Not a function of its pressure (B) Not a function of its nature (C) Not a function of its temperature (D) Unity, if it follows PV = nRT

Last Answer : (A) Not a function of its pressure

Compressibility factor (i.e., the ratio of actual volume of gas to the volume predicted by ideal gas law) for all gases are (A) Always greater than one (B) Same at the same reduced temperature (C) Same at the same reduced pressure (D) Both (B) & (C)

Description : Compressibility factor (i.e., the ratio of actual volume of gas to the volume predicted by ideal gas law) for all gases are (A) Always greater than one (B) Same at the same reduced temperature (C) Same at the same reduced pressure (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Average Fixed Cost Curve is - (1) Upward sloping (2) `U' shaped (3) 'V' shaped (4) Downward sloping

Description : Average Fixed Cost Curve is - (1) Upward sloping (2) `U' shaped (3) 'V' shaped (4) Downward sloping

Last Answer : (4) Downward sloping Explanation: The Average Fixed Cost Curve graphically represents the relation between average fixed cost incurred by a firm in the short-run product of a good or service and the quantity produced. It is relatively high at small quantities of output.

Average Fixed Cost Curve is (1) Upward sloping (2) ‘U’ shaped (3) ‘V’ shaped (4) Downward sloping

Description : Average Fixed Cost Curve is (1) Upward sloping (2) ‘U’ shaped (3) ‘V’ shaped (4) Downward sloping

Last Answer : Downward sloping 

The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Description : The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Last Answer : (A) Work done under adiabatic condition

The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Description : The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Last Answer : C) Work done under isothermal condition

Archimedes principle states that  a. when a body is inversed in a fluid, the fluid exerts a downward force on the body whose magnitude is equal to the weight of the displaced fluid  b. when a body is inversed in a fluid, the fluid exerts a upward force on the body whose magnitude is equal to the weight of the displaced fluid.  c. when a body is inversed in a fluid, the fluid exerts a downward force on the body whose magnitude is greater than the weight of the displaced fluid.  d. when a body is inversed in a fluid, the fluid exerts a downward force on the body whose magnitude is lower than the weight of the displaced fluid.

Description : Archimedes principle states that  a. when a body is inversed in a fluid, the fluid exerts a downward force on the body whose magnitude is equal to the weight of the displaced fluid  b. ... fluid exerts a downward force on the body whose magnitude is lower than the weight of the displaced fluid.

Last Answer : when a body is inversed in a fluid, the fluid exerts a upward force on the body whose magnitude is equal to the weight of the displaced fluid.

For an ideal gas, the activity co-efficient is (A) Directly proportional to pressure (B) Inversely proportional to pressure (C) Unity at all pressures (D) None of these

Description : For an ideal gas, the activity co-efficient is (A) Directly proportional to pressure (B) Inversely proportional to pressure (C) Unity at all pressures (D) None of these

Last Answer : (C) Unity at all pressures

Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Description : Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Last Answer : (A) Mass transfer co-efficient does not account for gas-liquid diffusion

Pick up the correct statement from the following: A. The sewer pipes of sizes less than 0.4 m diameter are designed as running full at maximum discharge B. The sewer pipes of sizes greater than 0.4 m diameter are designed as running 2/3rd or 3/4th full at maximum discharge C. The minimum design velocity of sewer pipes is taken as 0.8 m/sec D. All the above

Description : Pick up the correct statement from the following: A. The sewer pipes of sizes less than 0.4 m diameter are designed as running full at maximum discharge B. The sewer pipes of sizes greater than 0.4 m ... discharge C. The minimum design velocity of sewer pipes is taken as 0.8 m/sec D. All the above

Last Answer : ANS: D

For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Description : For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Last Answer : (A) Venturimeter

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication

Description : The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication 

Last Answer : (a) Upward communication ; 

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of an inert gas at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Description : Pick out the wrong statement pertaining to the decomposition of PCl5 represented by, PCl5 ⇌ PCl3 + Cl2.Degree of dissociation of PCl5 will (A) Decrease on addition of Cl2 (B) Increase on addition of ... at constant pressure (C) Decrease on increasing the pressure of the system (D) None of these

Last Answer : (D) None of thes

The adiabatic saturation curve for a vapour-gas mixture is (A) Straight line (B) Slightly concave upward (C) Slightly concave downward (D) None of these

Description : The adiabatic saturation curve for a vapour-gas mixture is (A) Straight line (B) Slightly concave upward (C) Slightly concave downward (D) None of these

Last Answer : (B) Slightly concave upward

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

The direction in which the formal communication flows is always (a) Upward (b) Downward (c) Horizontal (d) All of these

Description : The direction in which the formal communication flows is always (a) Upward (b) Downward (c) Horizontal (d) All of these

Last Answer : d) All of these

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the correct statement. (A) Deforestation helps in controlling the green house effect (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone (C) Lightening discharges are natural source of production of SO2 & H2S pollutant (D) Sulphur dioxide causes death by asphyxiation

Description : Pick out the correct statement. (A) Deforestation helps in controlling the green house effect (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone ( ... natural source of production of SO2 & H2S pollutant (D) Sulphur dioxide causes death by asphyxiation

Last Answer : (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone

In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Description : In an incompressible flow of fluid, the fluid (A) Temperature remains constant (B) Compressibility is greater than zero (C) Density does not change with pressure & temperature (D) Is frictionless

Last Answer : (C) Density does not change with pressure & temperature