In case of flow through parallel pipes, (A) The head loss for all the pipes is same (B) The total discharge is equal to the sum of discharges in the various pipes (C) The total head loss is the sum of head losses in the various pipes (D) Both (A) and (B)

In case of flow through parallel pipes,
(A) The head loss for all the pipes is same
(B) The total discharge is equal to the sum of discharges in the various pipes
(C) The total head loss is the sum of head losses in the various pipes
(D) Both (A) and (B)
by

1 Answer

Answer :

Answer: Option D
by

Related questions

In parallel pipe problems, the (A) Head loss is the same through each pipe (B) Discharge is the same through all the pipes (C) Total head loss is equal to the sum of the head losses through each pipe (D) None of these

Description : In parallel pipe problems, the (A) Head loss is the same through each pipe (B) Discharge is the same through all the pipes (C) Total head loss is equal to the sum of the head losses through each pipe (D) None of these

Last Answer : (A) Head loss is the same through each pipe

In case of end to end connection of two or more pipes in series, the __________ each pipe.(A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Description : In case of end to end connection of two or more pipes in series, the __________ each pipe. (A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Last Answer : (A) Same rate of flow passes through

The total discharge from two wells situated near to each other is(A) Sum of the discharges from individual wells (B) Less than the sum of the discharges from individual wells (C) Greater than the sum of the discharges from individual wells (D) Equal to larger of the two discharges from individual wells

Description : The total discharge from two wells situated near to each other is (A) Sum of the discharges from individual wells (B) Less than the sum of the discharges from individual wells (C) Greater ... of the discharges from individual wells (D) Equal to larger of the two discharges from individual wells

Last Answer : (B) Less than the sum of the discharges from individual wells

A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of head and discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Description : A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of ... discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Last Answer : Answer: Option C

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

14. When the pipes are in series, the total head loss is equal to the sum of the head loss in each pipe A) Yes B) No

Description : 14. When the pipes are in series, the total head loss is equal to the sum of the head loss in each pipe A) Yes B) No

Last Answer : A

Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B) The co-efficient of contraction of a Venturimeter is always unity (C) For a fixed pressure drop, the discharge of a gas through a Venturimeter is greater, when compressibility is taken into account, than when it is neglected (D) None of these

Description : Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B ... , when compressibility is taken into account, than when it is neglected (D) None of these

Last Answer : (D) None of these

the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as (A) 0.10 m (B) 0.20 m (C) 0.5 m (D) 1.0 m

Description : the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as (A) 0.10 m (B) 0.20 m (C) 0.5 m (D) 1.0 m

Last Answer : Answer: Option D

If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Description : If Nf , Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant) (A) q = (Nf/Nd) (B) q = KH (Nd/(Nf ) (C) q = KH (Nf/Nd) (D) q = KH Nf/Nd)

Last Answer : Answer: Option C

The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Description : The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Last Answer : Answer: Option D

A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Description : A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Head loss in smaller size pipes at equal velocities, is less (B) Cost of pumping is less in smaller size pipes (C) Cost of smaller pipes is comparatively more (D) None of these

Description : Pick up the correct statement from the following:  (A) Head loss in smaller size pipes at equal velocities, is less  (B) Cost of pumping is less in smaller size pipes  (C) Cost of smaller pipes is comparatively more  (D) None of these 

Last Answer : (D) None of these 

The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Description : The discharge through a convergent mouthpiece is __________ the discharge through an internal mouthpiece of the same diameter and head of water. (A) Equal to (B) One-half (C) Three fourth (D) Double

Last Answer : Answer: Option D

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow centrifugal pump, the impeller discharges into a gradually expanding spiral casing (C) The efficiency of turbine type of radial flow centrifugal pump, is always higher than that of volute type (D) All the above

Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps:  (A) These are provided with volute type or turbine type casings  (B) In involute type of radial flow ... centrifugal pump, is always higher than that of  volute type  (D) All the above 

Last Answer : (D) All the above 

Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss of head in the orifice to the head of water available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Last Answer : Answer: Option C

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal ... resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Description : A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Last Answer : Answer: Option A

Two identical pumps, each capable of delivering 0.2 cumec, against a head of 30 m, are connected in parallel. The resulting discharge is : a) 0.4 cumec against a head of 30 m b) 0.4 cumec against a head of 60 m c) 0.2 cumec against a head of 30 m d) 0.2 cumec against a head of 60 m

Description : Two identical pumps, each capable of delivering 0.2 cumec, against a head of 30 m, are connected in parallel. The resulting discharge is : a) 0.4 cumec against a head of 30 m b) 0.4 cumec against a head of 60 m c) 0.2 cumec against a head of 30 m d) 0.2 cumec against a head of 60 m

Last Answer : a) 0.4 cumec against a head of 30 m

Free (threshed) seed carried over straw discharge from the rear of shoe is called:- a) Cylinder loss b) Walker losses ( rack loss) C) Shoe loss d) Gathering losses

Description : Free (threshed) seed carried over straw discharge from the rear of shoe is called:- a) Cylinder loss b) Walker losses ( rack loss) C) Shoe loss d) Gathering losses

Last Answer : C) Shoe loss

Free (threshed) seed carried over the Walker or rack in straw and discharge from the rear of machine is called as :- a) Cylinder loss b) Walker losses (rack loss) C) Shoe loss d) Gathering losses

Description : Free (threshed) seed carried over the Walker or rack in straw and discharge from the rear of machine is called as :- a) Cylinder loss b) Walker losses (rack loss) C) Shoe loss d) Gathering losses

Last Answer : b) Walker losses (rack loss)

Unthreshed seed discharge from the rear of the machine either in straw or in the material from the cleaning shoe is called :- a) Cylinder loss b) Walker losses(rack loss) C) Shoe loss d) Gathering losses

Description : Unthreshed seed discharge from the rear of the machine either in straw or in the material from the cleaning shoe is called :- a) Cylinder loss b) Walker losses(rack loss) C) Shoe loss d) Gathering losses

Last Answer : a) Cylinder loss

Pick up the correct statement from the following: (A) Deposition of calcium carbonate on the inside of the well pipe, causes incrustation of the pipe (B) Incrustation of the pipe reduces the discharge (C) Acidic waters cause corrosion of the pipes (D) All the above

Description : Pick up the correct statement from the following:  (A) Deposition of calcium carbonate on the inside of the well pipe, causes incrustation of the  pipe  (B) Incrustation of the pipe reduces the discharge  (C) Acidic waters cause corrosion of the pipes  (D) All the above 

Last Answer : (D) All the above 

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

The loss of pressure head in case of laminar flow is proportional to (A) Velocity (B) (Velocity)2 (C) (Velocity)3 (D) (Velocity)4

Description : The loss of pressure head in case of laminar flow is proportional to (A) Velocity (B) (Velocity)2 (C) (Velocity)3 (D) (Velocity)4

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The internal pressure within a pipe, is caused due to water head and hammer pressure (B) In pressure pipes with water at rest, the pressure is equal to water head (C) Sudden closure of a valve, causes the water hammer pressure (D) All the above

Description : Pick up the correct statement from the following:  (A) The internal pressure within a pipe, is caused due to water head and hammer pressure  (B) In pressure pipes with water at rest, the pressure ... (C) Sudden closure of a valve, causes the water hammer pressure  (D) All the above 

Last Answer : (D) All the above 

If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Description : If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Last Answer : Answer: Option D

The seepage exit gradient in a soil is the ratio of A) Total head to the length of seepage (B) Flow line to slope (C) Head upstream to that at downstream (D) Head loss to the length of the seepage

Description : The seepage exit gradient in a soil is the ratio of A) Total head to the length of seepage (B) Flow line to slope (C) Head upstream to that at downstream (D) Head loss to the length of the seepage

Last Answer : Answer: Option D

Which of the following statements is true concerning simple parallel resistance circuits? A. The total current flow equals the sum of the individual currents. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistance. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements is true concerning simple parallel resistance circuits? A. The total current flow equals the sum of the individual currents. B. The total current flow equals the ... resistance. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

List various minor losses in fluid flow. Explain any one type with sketch and formula.

Description : List various minor losses in fluid flow. Explain any one type with sketch and formula.

Last Answer : List various minor losses a) Sudden expansion of pipe b) Sudden contraction of pipe c) Pipe fittings d) Bend in pipe e) Loss of head at Entry. f) Loss of ... The head loss resulting from pipe expansion may be greatly reduced by introducing gradual pipe transition known as diffuser. 

In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth

Description : In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth

Last Answer : Answer: Option C

Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Description : Pick up the correct statement in case of water supply. (A) Pipes laid in trenches and pipes fixed to walls are measured separately (B) Cutting through walls and floors are included with the item (C) Pipes are classified according to their sizes and quality (D) All the above

Last Answer : (D) All the above

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Total flow in stream is known (A) Run off (B) Stream flow (C) Discharge (D) All the above

Description : Total flow in stream is known (A) Run off (B) Stream flow (C) Discharge (D) All the above

Last Answer : (D) All the above

Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option C

Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Reynolds number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option B

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity force, and wave making effects, as with ship's hulls (D) All of the above

Description : Mach number is significant in (A) Supersonics, as with projectiles and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through ... gravity force, and wave making effects, as with ship's hulls (D) All of the above

Last Answer : Answer: Option A

The quantity of seepage of water through soils is proportional to (A) Coefficient of permeability of soil (B) Total head loss through the soil (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : The quantity of seepage of water through soils is proportional to (A) Coefficient of permeability of soil (B) Total head loss through the soil (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece. (A) Less than (B) More than (C) Equal to (D) None of these

Description : The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a given discharge. 4. The Froude number is equal to unity. Which of these statements are correct? (a) 1 , 2 & 3 only (b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Description : Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a ... b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Last Answer : (b) 1, 2, 3 & 4

A no bhzzle placed at the end of a water pipe line discharges water at a (A) Low pressure (B) High pressure (C) Low velocity(D) High velocity

Description : A nozzle placed at the end of a water pipe line discharges water at a (A) Low pressure (B) High pressure (C) Low velocity (D) High velocity

Last Answer : Answer: Option D

A fire hose has a nozzle attached to it, and the nozzle discharges a jet of water into the atmosphere at a velocity of 20 m/s. this causes the joint of the nozzle with the hose to be in : (a) Tension (b) A state of zero stress (c) Compression (d) Bending stress

Description : A fire hose has a nozzle attached to it, and the nozzle discharges a jet of water into the atmosphere at a velocity of 20 m/s. this causes the joint of the nozzle with the hose to be in : (a) Tension (b) A state of zero stress (c) Compression (d) Bending stress

Last Answer : (a) Tension

Flow of air from one place to the other is caused due to (A) The sum of elevation (B) Pressure head (C) Velocity head (D) All of the above

Description : Flow of air from one place to the other is caused due to (A) The sum of elevation (B) Pressure head (C) Velocity head (D) All of the above

Last Answer : (D) All of the above