The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility
(B) Work done under adiabatic condition
(C) Work done under isothermal condition
(D) Co-efficient of thermal expansion
by

1 Answer

Answer :

C) Work done under isothermal condition
by

Related questions

The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Description : The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Last Answer : (A) With pressure changes at constant temperature

The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Description : The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Last Answer : (A) Work done under adiabatic condition

The expression for entropy change given by, ΔS = - nR ln (P2/P1), holds good for (A) Expansion of a real gas (B) Reversible isothermal volume change (C) Heating of an ideal gas (D) Cooling of a real gas

Description : The expression for entropy change given by, ΔS = - nR ln (P2/P1), holds good for (A) Expansion of a real gas (B) Reversible isothermal volume change (C) Heating of an ideal gas (D) Cooling of a real gas

Last Answer : (B) Reversible isothermal volume change

Which of the following is the Ideal gas law (equation)?  A. V/T = K  B. V= k*(1/P)  C. P1/T1 = P2/T2  D. PV = nRT

Description : Which of the following is the Ideal gas law (equation)?  A. V/T = K  B. V= k*(1/P)  C. P1/T1 = P2/T2  D. PV = nRT

Last Answer : PV = nRT

To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to that of vapour phase (B) Vapour phase behaves as an ideal gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Description : To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to ... gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Description : The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Last Answer : (D) Simultaneous heating and expansion of an ideal gas

The difference between isothermal compressibility and adiabatic compressibility for an ideal gas is (A) 0 (B) +ve (C) -ve (D) ∞

Description : The difference between isothermal compressibility and adiabatic compressibility for an ideal gas is (A) 0 (B) +ve (C) -ve (D) ∞

Last Answer : (B) +ve

What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to the __________ mean of P1 and P2.(where, P1 and P2 are initial and final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Description : A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to ... final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Last Answer : (C) Geometric

Which of the following is the correct option for the free expansion of an ideal gas under adiabatic condition?

Description : Which of the following is the correct option for the free expansion of an ideal gas under adiabatic condition?

Last Answer : Which of the following is the correct option for the free expansion of an ideal gas under adiabatic condition? A. `q= ... q = 0, Delta T lt 0, w ne 0`

Which of the following engines is the most efficient?  a. Isobaric expansion  b. Adiabatic compression  c. Adiabatic expansion  d. Isothermal expansion

Description : Which of the following engines is the most efficient?  a. Isobaric expansion  b. Adiabatic compression  c. Adiabatic expansion  d. Isothermal expansion

Last Answer : Isobaric expansion

What is the ratio of adiabatic compressibility to isothermal compressibility? (A) 1 (B) < 1 (C) > 1 (D) >> 1

Description : What is the ratio of adiabatic compressibility to isothermal compressibility? (A) 1 (B) < 1 (C) > 1 (D) >> 1

Last Answer : (B) < 1

(1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Description : (1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Last Answer : (C) co-efficient of thermal expansion

The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Description : The expression for the work done for a reversible polytropic process can be used to obtain the expression for work done for all processes, except reversible __________ process. (A) Isobaric (B) Isothermal (C) Adiabatic (D) None of these

Last Answer : (B) Isothermal

What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Description : What is the value of ln y (where y = activity co-efficient) for ideal gases? (A) Zero (B) Unity (C) Infinity (D) Negative

Last Answer : (A) Zero

The work done by 100 calorie of heat in isothermal expansion of ideal gas is :-

Description : The work done by 100 calorie of heat in isothermal expansion of ideal gas is :-

Last Answer : The work done by 100 calorie of heat in isothermal expansion of ideal gas is :- A. 418.4 J B. 4.184 J C. 41.84 J D. None

Compressibility factor of a gas is (A) Not a function of its pressure (B) Not a function of its nature (C) Not a function of its temperature (D) Unity, if it follows PV = nRT

Description : Compressibility factor of a gas is (A) Not a function of its pressure (B) Not a function of its nature (C) Not a function of its temperature (D) Unity, if it follows PV = nRT

Last Answer : (A) Not a function of its pressure

Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Description : Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Last Answer : (A) d ln p/dt = Hvap/RT2

In a P-V diagram (for an ideal gas), an isothermal curve will coincide within adiabatic curve (through a point), when (A) Cp < Cv (B) Cp = Cv (C) Cp > Cv (D) C ≥ Cv

Description : In a P-V diagram (for an ideal gas), an isothermal curve will coincide within adiabatic curve (through a point), when (A) Cp < Cv (B) Cp = Cv (C) Cp > Cv (D) C ≥ Cv

Last Answer : (B) Cp = Cv

On a P-V diagram of an ideal gas, suppose a reversible adiabatic line intersects a reversible isothermal line at point A. Then at a point A, the slope of the reversible adiabatic line (∂P/∂V)s and the slope of the reversible isothermal line (∂P/∂V)T are related as (where, y = Cp/Cv) (A) (∂P/∂V)S = (∂P/∂V)T (B) (∂P/∂V)S = [(∂P/∂V)T]Y (C) (∂P/∂V)S = y(∂P/∂V)T (D) (∂P/∂V)S = 1/y(∂P/∂V)T

Description : On a P-V diagram of an ideal gas, suppose a reversible adiabatic line intersects a reversible isothermal line at point A. Then at a point A, the slope of the reversible adiabatic line (∂P/∂V)s and the slope of the reversible isothermal line ... Y (C) (∂P/∂V)S = y(∂P/∂V)T (D) (∂P/∂V)S = 1/y(∂P/∂V)T

Last Answer : (C) (∂P/∂V)S = y(∂P/∂V)T

When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called  a. reversible  b. adiabatic  c. polytropic  d. isothermal

Last Answer : adiabatic

When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called;  a. Isometric process  b. Isothermal process  c. Isobaric process  d. Adiabatic process

Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called;  a. Isometric process  b. Isothermal process  c. Isobaric process  d. Adiabatic process

Last Answer : Adiabatic process

In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Description : In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Last Answer : (D) Adiabatic compression

Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Description : Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Last Answer : (A) Increase the porosity

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

An ideal gas is taken around the cycle ABCA as shown in P-V diagram below: The work done by the gas during the cycle is equal to (A) 12 P1V1 (B) 6 P1 V1 (C) 3 P1V1 (D) P1 V1

Description : An ideal gas is taken around the cycle ABCA as shown in P-V diagram below: The work done by the gas during the cycle is equal to (A) 12 P1V1 (B) 6 P1 V1 (C) 3 P1V1 (D) P1 V1

Last Answer : (C) 3 P1V1

In a totally irreversible isothermal expansion process for an ideal gas, ΔE = 0, ΔH = 0. Then ΔQ and ΔS will be (A) ΔQ = 0, ΔS=0 (B) ΔQ = 0, ΔS = +ve (C) ΔQ = 0, ΔS = -ve (D) ΔQ = +ve, ΔS= +ve

Description : In a totally irreversible isothermal expansion process for an ideal gas, ΔE = 0, ΔH = 0. Then ΔQ and ΔS will be (A) ΔQ = 0, ΔS=0 (B) ΔQ = 0, ΔS = +ve (C) ΔQ = 0, ΔS = -ve (D) ΔQ = +ve, ΔS= +ve

Last Answer : (B) ΔQ = 0, ΔS = +ve

Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B) The co-efficient of contraction of a Venturimeter is always unity (C) For a fixed pressure drop, the discharge of a gas through a Venturimeter is greater, when compressibility is taken into account, than when it is neglected (D) None of these

Description : Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B ... , when compressibility is taken into account, than when it is neglected (D) None of these

Last Answer : (D) None of these

The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Description : The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Last Answer : (B) Free expansion of an ideal gas

The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Description : The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Last Answer : Option A

A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Last Answer : Answer: A

Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Description : Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Last Answer : Answer : e

The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Description : The value of n = 1 in the polytropic process indicates it to be  (a) reversible process  (b) isothermal process  (c) adiabatic process  (d) irreversible process  (e) free expansion process.

Last Answer : Answer : b

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Description : Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Last Answer : (C) Pyrex

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Description : Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Last Answer : (C) ZnO

__________ glass has the lowest co-efficient of thermal expansion and hence is more heat resistant. (A) Pyrex (B) Soda lime (C) Lead (D) High silica

Description : __________ glass has the lowest co-efficient of thermal expansion and hence is more heat resistant. (A) Pyrex (B) Soda lime (C) Lead (D) High silica

Last Answer : (A) Pyrex

Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Description : Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Last Answer : (D) Thermal co-efficient of expansion

For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to `20 dm^(3), Delta H` is -

Description : For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to `20 dm^(3), Delta H` is -

Last Answer : For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to ` ... . `-1.73 KJ` C. `3.46 KJ` D. Zero

The work done in isothermal compression compared to that in adiabatic compression will be (A) Less (B) More (C) Same (D) More or less depending upon the extent of work done

Description : The work done in isothermal compression compared to that in adiabatic compression will be (A) Less (B) More (C) Same (D) More or less depending upon the extent of work done

Last Answer : (B) More

Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k

Description : Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k

Last Answer : a.2i+2j-6k

Two lines are parallel when a.P1 X P2=0 b.P1 . P2=0 c.P1 = P2 d.P1+ P2=0

Description : Two lines are parallel when a.P1 X P2=0 b.P1 . P2=0 c.P1 = P2 d.P1+ P2=0

Last Answer : a.P1 X P2=0

Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Last Answer : c.[3.75 4.75 6.75]

Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Last Answer : b.3i-j-5k

Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Last Answer : a.[3 5 8]+u[3 -1 -5]

In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)

The molecular formula of phosphorus is (a) P1 (b) P2 (c) P3 (d) P4

Description : The molecular formula of phosphorus is (a) P1 (b) P2 (c) P3 (d) P4

Last Answer : Ans:(d)

Q No: 251 In a sludge digestion tank if the moisture content of sludge V1 litres is reduced from p1 % to p2 % the volume V2 is A. [(100 + P1)/(100 – P2)] V1 B. [(100 – P1)/(100 + P2)] V1 C. [(100 – P1)/(100 – P2)] V1 D. [(100 + P2)/(100 – P1)] V1

Description : Q No: 251 In a sludge digestion tank if the moisture content of sludge V1 litres is reduced from p1 % to p2 % the volume V2 is A. [(100 + P1)/(100 – P2)] V1 B. [(100 – P1)/(100 + P2)] V1 C. [(100 – P1)/(100 – P2)] V1 D. [(100 + P2)/(100 – P1)] V1

Last Answer : ANS: C