Vane anemometer (A) Is an area meter (B) Is a variable head meter (C) Rotates an element at a speed determined by the velocity of the fluid inwhich the meter is immersed(D) None of these

Vane anemometer
(A) Is an area meter
(B) Is a variable head meter
(C) Rotates an element at a speed determined by the velocity of the fluid inwhich the meter is immersed
(D) None of these
by

1 Answer

Answer :

(C) Rotates an element at a speed determined by the velocity of the fluid inwhich the meter is immersed
by

Related questions

Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Description : Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Last Answer : (B) Hot wire anemometer

What is a vane anemometer?

Description : What is a vane anemometer?

Last Answer : Need answer

Drag co-efficient for flow past immersed body is the ratio of __________ to the product of velocity head and density. (A) Shear stress (B) Shear force (C) Average drag per unit projected area (D) None of these

Description : Drag co-efficient for flow past immersed body is the ratio of __________ to the product of velocity head and density. (A) Shear stress (B) Shear force (C) Average drag per unit projected area (D) None of these

Last Answer : (C) Average drag per unit projected area

26. Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer

Description : Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer

Last Answer : Pitot tube

Which of the following flow measuring devices is an area meter? (A) Venturimeter (B) Orificemeter (C) Anemometer (D) Rotameter

Description : Which of the following flow measuring devices is an area meter? (A) Venturimeter (B) Orificemeter (C) Anemometer (D) Rotameter

Last Answer : (D) Rotameter

the fluid flow rate increases, the float of the Rotameter (A) Rises in the tube (B) Rotates at higher speed (C) Rotates at lower speed (D) Drops down in the tube

Description : the fluid flow rate increases, the float of the Rotameter (A) Rises in the tube (B) Rotates at higher speed (C) Rotates at lower speed (D) Drops down in the tube

Last Answer : Option A

Anemometer is used to measure – (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Description : Anemometer is used to measure – (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Last Answer : (2) wind velocity Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The first known description of an anemometer was given by Leon Battista Alberti around 1450.

Anemometer is an instrument meant for measuring (1) velocity (2) air masses (3) wind speed (4) temperature

Description : Anemometer is an instrument meant for measuring (1) velocity (2) air masses (3) wind speed (4) temperature

Last Answer :  wind speed

Anemometer is used to measure (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Description : Anemometer is used to measure (1) wind direction (2) wind velocity (3) pressure gradient (4) wind speed and time

Last Answer : wind velocity

Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Description : Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Last Answer : Answer: A

A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe

Description : A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe

Last Answer : Answer: C

Inwhich market structure is the demand curve of the market represented by the demand curve of the firm? (1) Monopoly (2) Oligopoly (3) Duopoly (4) Perfect Competition

Description : Inwhich market structure is the demand curve of the market represented by the demand curve of the firm? (1) Monopoly (2) Oligopoly (3) Duopoly (4) Perfect Competition

Last Answer : (1) Monopoly Explanation: Because the monopolist is the market's only supplier, the demand curve the monopolist faces is the market demand curve. The market demand curve is downward sloping, ... expect to receive for its output will not remain constant as the monopolist increases its output.

Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Description : Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Last Answer : (D) None of these

In case of a centrifugal pump, the theoretical head developed is dependent on the __________ the impeller. (A) Speed of (B) Diameter of (C) Fluid velocity leaving (D) All (A), (B) and (C)

Description : In case of a centrifugal pump, the theoretical head developed is dependent on the __________ the impeller. (A) Speed of (B) Diameter of (C) Fluid velocity leaving (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Compare variable head flow meter with variable area flow meter.

Description : Compare variable head flow meter with variable area flow meter.

Last Answer : Parameter Variable head flowmeter Variable area flowmeter Working principle Restriction or obstacle is placed in the path of flow to create a differential Pressure. The pressure ... viscous fluid slurries and dirty fluids. In laboratories and testing and production lines.

Which apparatus is used to measure the intensity of light? (1) Lux meter (2) Calorimeter (3) Anemometer (4) Altimeter

Description : Which apparatus is used to measure the intensity of light? (1) Lux meter (2) Calorimeter (3) Anemometer (4) Altimeter

Last Answer : Lux meter

For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing guide vane angle at inlet as 90o c) Providing runner vane angle at exit as 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Description : For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing ... 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Last Answer : d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids

Description : Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids

Last Answer : (C) Velocity of gases

Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer

Description : Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer

Last Answer : (D) Hot wire anemometer

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis

Which is not a variable head meter? (A) Venturimeter (B) Pitot tube (C) Rotameter (D) None of these

Description : Which is not a variable head meter? (A) Venturimeter (B) Pitot tube (C) Rotameter (D) None of these

Last Answer : (C) Rotameter

Deformation drag, which is caused by widespread deformation of fluid around the immersed body(A) Occurs when NReis very small(B) Is primarily a friction drag(C) Is independent of body length(D) Depends mainly on cross-sectional shape

Description : Deformation drag, which is caused by widespread deformation of fluid around the immersed body (A) Occurs when NRe is very small (B) Is primarily a friction drag (C) Is independent of body length (D) Depends mainly on cross-sectional shape

Last Answer : (A) Occurs when NRe is very small

Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid(A) Lies above the centroid of the plane surface(B) Is independent of the specific weight of the fluid(C) Is different for different fluids(D) Is at the centroid of the plane surface

Description : Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid (A) Lies above the centroid of the plane surface (B) Is independent of the specific weight of the fluid (C) Is different for different fluids (D) Is at the centroid of the plane surface

Last Answer : (B) Is independent of the specific weight of the fluid

Instrument for measuring wind velocity is called – (1) Coulombmeter (2) Anemometer (3) Cyanometer (4) Chronometer

Description : Instrument for measuring wind velocity is called – (1) Coulombmeter (2) Anemometer (3) Cyanometer (4) Chronometer

Last Answer : (2) Anemometer Explanation: An anemometer is an instrument that measures wind speed and wind pressure. Anemometers are important tools for meteorologists, who study weather patterns. The term is derived from the Greek word anemos, which means wind.

Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is – (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : (2) Anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, and ... between the pressure and the speed, an anemometer designed for one will give information about both.

------- is used for measuring velocity? A. Speedometer (Answer) B. Anemometer C. Odometer D. Hygrometer

Description : ------- is used for measuring velocity? A. Speedometer (Answer) B. Anemometer C. Odometer D. Hygrometer

Last Answer : A. Speedometer (Answer)

Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Description : Instrument used to measure the force and velocity of the wind is (1) Ammeter (2) Anemometer (3) Altimeter (4) Audiometer

Last Answer : Anemometer

Speed of a submarine in deep sea & that of an aeroplane is measured by a/an (A) Pitot tube (B) Hot wire anemometer (C) Rotameter (D) Stroboscope

Description : Speed of a submarine in deep sea & that of an aeroplane is measured by a/an (A) Pitot tube (B) Hot wire anemometer (C) Rotameter (D) Stroboscope

Last Answer : (A) Pitot tube

The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called (A) Up-thrust (B) Reaction (C) Buoyancy (D) Metacentre

Description : The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called (A) Up-thrust (B) Reaction (C) Buoyancy (D) Metacentre

Last Answer : Answer: Option C

According to the principle of buoyancy a body totally or partially immersed in a fluid will be lifted up by a force equal to (A) The weight of the body (B) More than the weight of the body (C) Less than the weight of the body (D) Weight of the fluid displaced by the body

Description : According to the principle of buoyancy a body totally or partially immersed in a fluid will be lifted up by a force equal to (A) The weight of the body (B) More than the weight of the body (C) Less than the weight of the body (D) Weight of the fluid displaced by the body

Last Answer : Answer: Option D

The resultant upward pressure of the fluid on an immersed body is called (A) Up-thrust (B) Buoyancy (C) Center of pressure (D) All the above are correct

Description : The resultant upward pressure of the fluid on an immersed body is called (A) Up-thrust (B) Buoyancy (C) Center of pressure (D) All the above are correct

Last Answer : Answer: Option B

The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Description : The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called (A) Newton's law of motion (B) Newton's law of cooling (C) Newton's law of viscosity (D) Newton's law of resistance

Last Answer : Answer: Option D

Which principle states that when a body is partially or totally immersed in a fluid, it experiences an upward thrust equal to the weight of the fluid displaced by it?

Description : Which principle states that when a body is partially or totally immersed in a fluid, it experiences an upward thrust equal to the weight of the fluid displaced by it?

Last Answer : Archimedes

A fluid element has a velocity V = -y 2 . xi + 2yx 2 . j. The motion at (x, y) = (1/√2, 1) is (A) Rotational and incompressible (B) Rotational and compressible (C) Irrotational and compressible (D) Irrotational and incompressible

Description : A fluid element has a velocity V = -y 2 . xi + 2yx 2 . j. The motion at (x, y) = (1/√2, 1) is (A) Rotational and incompressible (B) Rotational and compressible (C) Irrotational and compressible (D) Irrotational and incompressible

Last Answer : (B) Rotational and compressible

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

A disc of radius R rotates with constant angular velocity `omega` about its own axis. Surface charge density of this disc varies as `sigma = alphar^(2

Description : A disc of radius R rotates with constant angular velocity `omega` about its own axis. Surface charge density of this disc varies as `sigma = alphar^(2

Last Answer : A disc of radius R rotates with constant angular velocity `omega` about its own axis. Surface charge density of ... D. `(mu_(0)alphaomegaR^(3))/(3)`

The head loss in turbulent flow in pipe is proportional to(where, V = velocity of fluid through the pipe) (A) V 2 (B) 1/V 2 (C) 1/V (D) V

Description : The head loss in turbulent flow in pipe is proportional to(where, V = velocity of fluid through the pipe) (A) V 2 (B) 1/V 2 (C) 1/V (D) V

Last Answer : (A) V

Speed of wind is measured by – (1) barometer (2) hygrometer (3) thermometer (4) anemometer

Description : Speed of wind is measured by – (1) barometer (2) hygrometer (3) thermometer (4) anemometer

Last Answer : (4) anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, ... aerodynamics. The first known description of an anemometer was given by Leon Battista Alberti around 1450.

The instrument used to measure the speed of the wind is – (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Description : The instrument used to measure the speed of the wind is – (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Last Answer : (2) Anemometer Explanation: An anemometer is a device for measuring wind speed, and is a common weather station instrument. The term is derived from the Greek word anemos, meaning wind, ... aerodynamics. The first known description of an anemometer was given by Leon Battista Alberti around 1450.

Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Last Answer : Answer: Option D

Which of the following pairing is incorrect? (1) Hygrometer Water vapour content of the atmosphere (2) Lactometer Specific gravity of liquids (3) Anemometer Speed of the wind (4) Seismograph Earthquakes

Description : Which of the following pairing is incorrect? (1) Hygrometer Water vapour content of the atmosphere (2) Lactometer Specific gravity of liquids (3) Anemometer Speed of the wind (4) Seismograph Earthquakes

Last Answer : Lactometer Specific gravity of liquids

An anemometer measures which of the following ? (1) Speed of light (2) Speed of wind (3) Speed of water current (4) Speed of satellites

Description : An anemometer measures which of the following ? (1) Speed of light (2) Speed of wind (3) Speed of water current (4) Speed of satellites 

Last Answer :  Speed of wind

The instrument used to measure the speed of the wind is (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Description : The instrument used to measure the speed of the wind is (1) Altimeter (2) Anemometer (3) Chronometer (4) Dosimeter

Last Answer : Anemometer

Speed of wind is measured by (1) barometer (2) hygrometer (3) thermometer (4)anemometer

Description : Speed of wind is measured by (1) barometer (2) hygrometer (3) thermometer (4)anemometer

Last Answer : anemometer

The head developed by a centrifugal pump is largely determined by the (A) Power of the pump(B) Nature of the liquid being pumped(C) Angle of the vanes and the speed of the tip of the impeller(D) Vapour pressure of the liquid

Description : The head developed by a centrifugal pump is largely determined by the (A) Power of the pump (B) Nature of the liquid being pumped (C) Angle of the vanes and the speed of the tip of the impeller (D) Vapour pressure of the liquid

Last Answer : (C) Angle of the vanes and the speed of the tip of the impeller

In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Description : In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Last Answer : (B) Pressure drop is almost constant

Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Description : Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Last Answer : (A) Vane

__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Description : __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Last Answer : (C) Plunger