__________ pumps are a group of vacuum pumps.
(A) Hyster
(B) Sump
(C) Mono
(D) Submerged

1 Answer

Answer :

(A) Hyster

Related questions

Description : A compressor that takes suction at a pressure below atmospheric and discharge against atmospheric pressure is called a __________ pump. (A) Sump (B) Volute (C) Vacuum (D) Submerged

Last Answer : (C) Vacuum

Description : A mono pump is a __________ pump. (A) Centrifugal (B) Piston (C) Positive acting rotary (D) A group of vacuum

Last Answer : (C) Positive acting rotary

Description : What exactly are sump pumps and how much are they?

Last Answer : Sump Pumps automatically drain water out from the ground outside to prevent basements from flooding. They cost about 50 dollars but are tough to install on your own.

Description : What stores carry sump pumps and approximately what is the cost?

Last Answer : You do not need a plumber to install or maintain a sump pumping system. As long as you provide adequate exhaust for the pump to take its water to, there should be no complications with a sump system.

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

Description : Which of the following produces maximum pressure difference for transportation of gases? (A) Vacuum pumps (B) Blowers (C) Fans (D) Compressors

Last Answer : (D) Compressors

Description : Does anyone have a wiring diagram for a Hyster electric forklift model E65XM2-40 Thanks, Ken.?

Last Answer : You can request a wiring diagram from Hyster Company. Just visit their website at http://hyster.com/americas/en-US and click on Contact Us at the bottom of the page.

Description : where can I get a hyster forklift?

Last Answer : The best place to begin looking for Hyster forklifts in your area is to visit www.hyster.com. This is the main website for the Hyster company and they provide all the information you would need to purchase such a forklift.

Description : Draining of shallow pits or sump is done by a sump pump, which is a __________ pump. (A) Single stage vertical (B) Centrifugal (C) Plunger (D) Diffuser

Last Answer : (A) Single stage vertical

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

Description : How much do brake vacuum pumps cost for a Saturn Vue?

Last Answer : You would have to go to Auto Zone, Pep Boys and speak to a mechanic to find out how much a brake pump would cost for a Saturn Vue. You can also go to the Saturn Dealership to find out how much they cost.

Description : Inside an aeroplane flying at a high altitude, (a) the pressure is the same as that outside (b) normal atmospheric pressure is maintained by the use of air pumps (c) the pressure inside is less than the pressure outside (d) normal humidity and partial vacuum are maintained

Last Answer : Ans:(b)

Description : Which of the following vacuum pumps operates by using a very cold surface to trap the gases on the cold surface? Is it a: w) sublimation pump x) turbo pump y) cryopump z) diffusion pump.

Last Answer : ANSWER: Y -- CRYOPUMP

Description : In case of __________ boiling, the bubbles formed on a submerged hot surface get absorbed in the mass of the liquid. (A) Nucleate (B) Pool (C) Low pressure (D) None of these

Last Answer : (B) Pool

Description : Bunsen burner is an example of a/an __________ burner. (A) Inside mixing/premix type (B) Outside mixing/diffusion flame/nozzle mix type (C) Rotary cup (D) Submerged combustion

Last Answer : (A) Inside mixing/premix type

Description : In Michelson interferometer semi silvered mirror is used To obtain __________. A. Thin film interference B. Phase coherence C. mono chromatic light D. colored fringe

Last Answer : B. Phase coherence

Description : A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy. (A) Coincides with (B) Lies below (C) Lies above (D) None of these

Last Answer : Answer: Option B

Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Last Answer : c. Steam boiler

Description : __________ pumps are axial flow pumps. (A) Turbine (B) Propeller (C) Diffuser (D) None of these

Last Answer : (B) Propeller

Description : Most of the centrifugal pumps used in chemical plants are usually __________ driven. (A) Steam (B) Diesel engine (C) Electric motor (D) Gas turbine

Last Answer : (C) Electric motor

Description : Foot valves provided in pumps are __________ valves. (A) Relief (B) Three/four way (C) Pressure reducing (D) Directional contro

Last Answer : (D) Directional control

Description : Sump Pump won't pump; how to fix?

Last Answer : Did you prime it to get it sucking? Small pumps will often need to be primed, especially if they were sitting dry for 20 years. Honestly, I am surprised that the motor is humming in the first ... years in a box, I would have expected the oil/lubricant/grease inside the housing to have dried out.

Description : Is there a typical lifespan for a sump pump?

Last Answer : It has to do with the number of cycles. A sump that has to turn on 5 times an hour will wear out five time fast than one that only is on once an hour. I bought a stainless steel, made in Germany, pump that ran for eighteen years without a problem, very wet basement.

Description : Is my sump pump running too long?

Last Answer : answer:Normal current surge at start-up is what creates the most wear and tear on a motor. The motor is air cooled, and it is not running long enough to overheat. Has it always performed this way? Or ... owned have had adjustments for the float. At this point, if it were mine, I would let it be.

Description : What tools will I need to clean up a sump pump mess?

Last Answer : This sounds like a HazMat scene. You may need to get a professional mold removal job done. The mask is a good idea BUT need to have the mask fitted and thoroughly cleaned after every use. You ... totally covered with mold and mildew. The studs, walls and flooring that were wet have to be replaced.

Description : Where does the water come from in a sump pump hole?

Last Answer : At our parents's house (built in 1962), the water that goes into the sump pump hole in the basement floor comes from the washing machine and utility sink when they are draining. Once the water gets to ... kicks on. The sink and washing machine are hooked up to the rest of the plumbing in the house.

Description : Taking Care Of Your Sump Pump?

Last Answer : If you live in an older home, your home might use a sump pump aspart of its sewage system. Some older homes also use a sump pump toprevent basement or crawlspace flooding. If your family's ... sand, dirt, and minerals from your pipes, can damageyour sump pump. There are chemical products available

Description : How to Troubleshoot a Sump Pump?

Last Answer : Sump pumps are used to prevent flooding in your basement. Theydo this by removing all of the excess water that is left in yoursump pit. It is important for you to understand how to fix itshould it ... to look in the drainpipe or the pump screen for thepossible clog. Make sure the pump is unplugg

Description : How To Know When A Sump Pump Will Help Dry Out Your Basement?

Last Answer : In homes across the country a damp basement is a fact of lifemany people live with. However, flowing water in any setting isproblem that generally needs to be addressed at some point in time ... , it canbe pumped into yards or other areas without fear of contamination.However, local building codes

Description : How To Install A Sump Pump In Your Home’s Crawl Space?

Last Answer : When you have a crawl space under your home, you have thepossibility of having flooding or water build up. If the level ofwater is allowed to build up too much you can find that your homecan sustain ... be level for thebest results.Step 3. Drill a small hole in the discharge pipe. This will hel

Description : Are all new homes built with a sump pump or do you have to install one yourself?

Last Answer : Not all new homes are built with a sump pump, but many communities that have had flooding problems now require them. You can install one yourself relatively easily if your home does not have one installed.

Description : How does a sump pump work and what is it used on?

Last Answer : A sump pump pumps the water that accumulates in the sump pit of your basement out into a place far enough away from your home so that it is no loner problematic. A sump pump is basically a vacumm ... in the basement of a home it is used to remove water that may find its way into your basement.

Description : What is the general cost of a sump pump?

Last Answer : Sump pumps cost around 100-300 dollars, depending on the type. This does not include the installation fee, however.

Description : Does a sump pump need regular maintenance?

Last Answer : The most important maintenance of a sump pump is to remove any dirt, particles, or debris that collects within the pump. This should be done regularly to prevent problems.

Description : what is a sump pump?

Last Answer : A sump pump is a pump used to remove water that has accumulated in a sump pit. A sump pit, commonly found in the home basement, is simply a hole to collect water. The water may enter via ... arrive because of rain or because of natural ground water, if the basement is below the water table level.

Description : Sump Pump Reviews?

Last Answer : form_title= Sump Pump Reviews form_header= Find the best Sump Pump for your home. Is this for a residential or commercial property?*= () Residential () Commercial What is your budget for sump pump?*= _ [50] Do you currently have water damage?*= () Yes () No

Description : Sump Pump Repair?

Last Answer : form_title=Sump Pump Repair form_header=11513 How would you best describe the problem?*= () "Bad odors () Motor sounds, but not discharging water () No power to sump pump unit () Water in sump overflowing () Needs general servicing () Other"

Description : Sump Pump Installation?

Last Answer : form_title=Sump Pump Installation form_header=11503 What is it you need a sump pump for?*= () Water leaks through walls () Basement floods during storms () Basement floods due to rising water table () In case ... Does the new pump location have electricity close-by?*= () Yes () No () Don't Know

Description : How to Repair a Boken Sump Pump?

Last Answer : A sump pump can normally last seven years, provided it stays covered. An uncovered pit would allow things to fall in, blocking the full ability of the pump. It is normally the small pieces that cause ... . If the pump starts and the level of water goes down, the float and switch are working normally

Description : Water to the consumers may be supplied from  (A) Infiltration galleries connected to sump well  (B) Infiltration well dug out on the banks of rivers  (C) Ranney wells sunk to the water level  (D) All the above 

Last Answer : (D) All the above 

Description : Mercury is typically used in the placement of which of the following tubes? a) Miller-Abbott Most nasoenteric tubes use mercury to carry the tube by gravity to its desired location. b) ... Dobbhoff tubes are used for enteric feeding. d) EnterafloW Enteraflow tubes are used for enteric feeding

Last Answer : a) Miller-Abbott Most nasoenteric tubes use mercury to carry the tube by gravity to its desired location.

Description : Medium -length nasoenteric tubes are used for: a) Feeding Placement of the tube must be verified prior to any feeding. b) Decompression A gastric sump and nasoenteric tube are used for ... aspiration. d) Emptying Gastric sump tubes are used to decompress the stomach and keep it empty.

Last Answer : a) Feeding Placement of the tube must be verified prior to any feeding.

Description : Elaborate the working of dry sump lubrication system with sketch.

Last Answer : Dry Sump Lubrication: Working of dry sump lubrication system: In this system, the lubricating oil is not stored in oil sump .The oil from the sump is carried to a ... engines. The pressure relief valves are used to maintain the predefined pressure value inside the lubricating system

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

Description : Rock phosphate constitutes mainly of (A) Fluorapatite (B) Di-calcium phosphate (C) Mono-calcium phosphate (D) Di-ammonium phosphate

Last Answer : (A) Fluorapatite

Description : The main constituent of rock phosphate is (A) Mono-calcium phosphate (B) Di-calcium phosphate (C) Fluorspar (D) None of these

Last Answer : (B) Di-calcium phosphate

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : The basic constituent of vegetable oils is (A) Triglyceride (B) Fatty acids (C) Fatty alcohol (D) Mono esters

Last Answer : (A) Triglyceride

Description : Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Last Answer : (B) 30

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace