Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Which feature of Go Back N ARQ
mechanism possesses an ability to assign the
sliding window in the forward direction?
a. Control Variables
b. Sender Sliding Window
c. Receiver Sliding Window
d. Resending of frames
by

1 Answer

Answer :

b. Sender Sliding Window
by

Related questions

Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Description : Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Last Answer : B. Sender Sliding Window

Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait B) Simplest

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Description : The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Last Answer : Go-Back-N ARQ; Stop-and-Wait

In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Description : In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Last Answer : 7

Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Selective-Repeat ARQ

Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Go-Back-N ARQ

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Description : Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Last Answer : b. Selective Repeat ARQ

In a Go-Back-N ARQ, if the window size is 63,what is the range of sequence numbers? A) 0to 63 B) 0to 64 C) 1to 63 D) 1to 64

Description : In a Go-Back-N ARQ, if the window size is 63,what is the range of sequence numbers? A) 0to 63 B) 0to 64 C) 1to 63 D) 1to 64

Last Answer : 0to 63

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 1

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 31

In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence numbers? A. 0 to 63 B. 0 to 64 C. 1 to 63 D. 1 to 64

Description : In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence numbers? A. 0 to 63 B. 0 to 64 C. 1 to 63 D. 1 to 64

Last Answer : A. 0 to 63

The range of sequence number which is the concern of the receiver is called the receive sliding window. A. receive sliding window. B. sliding window C. frame buffer D. both a and b

Description : The range of sequence number which is the concern of the receiver is called the receive sliding window. A. receive sliding window. B. sliding window C. frame buffer D. both a and b

Last Answer : A. receive sliding window.

In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A. Packet which are not lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Description : In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A ... lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Last Answer : B. Only those packets which are lost or corrupted

In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Description : In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Last Answer : modulo-2

Which consequences are more likely to occur during the frame transmission in StopandWait ARQ mechanism? a. Loss of frame or an acknowledgementb. Delay in an acknowledgement c. Normal operation d. All of the above

Description : Which consequences are more likely to occur during the frame transmission in StopandWait ARQ mechanism? a. Loss of frame or an acknowledgement b. Delay in an acknowledgement c. Normal operation d. All of the above

Last Answer : d. All of the above

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 16

In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Description : In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 16

The TCP sliding window a. can be used to control the flow of information b. always occurs when the field value is 0 c. always occurs when the field value is 1 d. occurs horizontally

Description : The TCP sliding window a. can be used to control the flow of information b. always occurs when the field value is 0 c. always occurs when the field value is 1 d. occurs horizontally

Last Answer : a. can be used to control the flow of information

Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding windowC)sliding packetD)none of the above

Description : Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding window C) sliding packet D) none of the above

Last Answer : sliding window

Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length of packet increases, efficiency of channel also increases. c. Distance between sender and receiver is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Description : Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length ... is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Last Answer : Distance between sender and receiver is directly proportional to efficiency of channel.

The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Description : The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Last Answer : A. electronic mail, server (storage)

The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is approximately equal to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Description : The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is ... to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Last Answer : 0.009

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B is 128 kbps. What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

The maximum size of the window in a Sliding Window Protocol is _______ A. 2m – 1 B. 2m + 1 C. 2m D. 2m-1

Description : The maximum size of the window in a Sliding Window Protocol is _______ A. 2m – 1 B. 2m + 1 C. 2m D. 2m-1

Last Answer : A. 2m – 1

A ________bridge can forward and filter frames andautomatically buildits forwarding table. A) simple B) dual C) transparent D) none of the above

Description : A ________bridge can forward and filter frames andautomatically buildits forwarding table. A) simple B) dual C) transparent D) none of the above

Last Answer : transparent

In ________ error correction, the receiver asks thesender tosend thedata again. A) backward B) retransmission C) forward D) none of the above

Description : In ________ error correction, the receiver asks thesender tosend thedata again. A) backward B) retransmission C) forward D) none of the above

Last Answer : retransmission

In ________ error correction, the receiver correctserrors without requestingretransmission. A) backward B) onward C) forward D) none of the above

Description : In ________ error correction, the receiver correctserrors without requestingretransmission. A) backward B) onward C) forward D) none of the above

Last Answer : forward

. ________ is the process in which the receiver tries to guess the message by using redundant bits A. Connection-Oriented Service B. Forward error correctionC. both a and b D. Confirm

Description : . ________ is the process in which the receiver tries to guess the message by using redundant bits A. Connection-Oriented Service B. Forward error correction C. both a and b D. Confirm

Last Answer : B. Forward error correction

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Last Answer : exactly 10

ARQ stands for _______. A) Automatic repeatquantization B) Automatic repeat request C) Automatic retransmissionrequest D) Acknowledge repeat request

Description : ARQ stands for _______. A) Automatic repeatquantization B) Automatic repeat request C) Automatic retransmissionrequest D) Acknowledge repeat request

Last Answer : Automatic repeat request

ARQ stands for __________ a. Automatic Repeat Request b. Automatic Request Repeat c. Application Repeat Request d. Application Request Repeat

Description : ARQ stands for __________ a. Automatic Repeat Request b. Automatic Request Repeat c. Application Repeat Request d. Application Request Repeat

Last Answer : a. Automatic Repeat Request

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Last Answer : B. High-level data link control

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Description : Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Last Answer : Sframes

_______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Description : _______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Flow

The term ___________ is used for a depth-first search that chooses values for one variable at a time and returns when a variable has no legal values left to assign. a) Forward search b) Backtrack search c) Hill algorithm d) Reverse-Down-Hill search

Description : The term ___________ is used for a depth-first search that chooses values for one variable at a time and returns when a variable has no legal values left to assign. a) Forward search b) Backtrack search c) Hill algorithm d) Reverse-Down-Hill search

Last Answer : b) Backtrack search

Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambleb. receiver section of a synchronous modem contains the scrambler c. transmission section of a synchronous modem contains the scrambler d. control section of a synchronous modem contains the scrambler e. none of the abover

Description : Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambler b. receiver section of a synchronous modem contains the scrambler c. transmission section of ... d. control section of a synchronous modem contains the scrambler e. none of the above

Last Answer : transmission section of a synchronous modem contains the scrambler

The suitable medium to establish commonness between sender and receiver of message

Description : The suitable medium to establish commonness between sender and receiver of message

Last Answer : Ans. Communication

Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Description : Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Last Answer : A. agreed upon in advance between sender and receiver

The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Description : The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Last Answer : C. determined by the sender and receiver

ECE Board Exam March 1996 Communications code is ____________. A. eight bits per character B. agreed upon in advance between sender and receiver C. the same in all modern computers D. either seven or eight bits per character

Description : ECE Board Exam March 1996 Communications code is ____________. A. eight bits per character B. agreed upon in advance between sender and receiver C. the same in all modern computers D. either seven or eight bits per character

Last Answer : B. agreed upon in advance between sender and receiver

Who should take the most responsibility for clear and effective communication? A. The Communications Manager B. The sender and the receiver C. The sender D. The receiver

Description : Who should take the most responsibility for clear and effective communication?  A. The Communications Manager B. The sender and the receiver C. The sender D. The receiver

Last Answer : B. The sender and the receiver

Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Description : Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Last Answer : a) Encryption

In the communication process, the receiver and sender are classified as A. communication functions B. communication parties C. communication tools D. communication channels

Description : In the communication process, the receiver and sender are classified as A. communication functions B. communication parties C. communication tools D. communication channels

Last Answer : B. communication parties