The maximum delivery pressure of compressors can be upto __________ atmospheres. (A) 10 (B) 100 (C) 250 (D) 1000

The maximum delivery pressure of compressors can be upto
__________ atmospheres.
(A) 10
(B) 100
(C) 250
(D) 1000
by

1 Answer

Answer :

(D) 1000
by

Related questions

The maximum head that can be developed by a single impeller is __________ ft(A) 25(B) 100(C) 250-300(D) 1000.

Description : The maximum head that can be developed by a single impeller is __________ ft. (A) 25 (B) 100 (C) 250-300 (D) 1000

Last Answer : (C) 250-300

The maximum delivery pressure of a reciprocating compressor may be about __________ kg/cm2 . (A) 1000 (B) 2000 (C) 3000 (D) 4000

Description : The maximum delivery pressure of a reciprocating compressor may be about __________ kg/cm2 . (A) 1000 (B) 2000 (C) 3000 (D) 4000

Last Answer : (D) 4000

Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Description : Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Last Answer : (B) 10

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Description : Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Last Answer : 10, 500

In case of loss or damage of the parcel, compensation is paid upto a maximum in EPP is a) 100/- b) 500/- c) 200/- d) 1000/

Description : In case of loss or damage of the parcel, compensation is paid upto a maximum in EPP is a) 100/- b) 500/- c) 200/- d) 1000/

Last Answer : b) 500/

In thermodynamics the standard pressure is 100.0 kpa . What is this value in units of atmospheres?

Description : In thermodynamics the standard pressure is 100.0 kpa . What is this value in units of atmospheres?

Last Answer : 1 atm

In thermodynamics the standard pressure is 100.0 kpa . What is this value in units of atmospheres?

Description : In thermodynamics the standard pressure is 100.0 kpa . What is this value in units of atmospheres?

Last Answer : 1 atm

The earth's atmosphere is an envelope of gases present upto a height of about __________ kms. (A) 10 (B) 200 (C) 1000 (D) 2000

Description : The earth's atmosphere is an envelope of gases present upto a height of about __________ kms. (A) 10 (B) 200 (C) 1000 (D) 2000

Last Answer : (B) 200

Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Last Answer : (B) 150

Which of the following produces maximum pressure difference for transportation of gases? (A) Vacuum pumps (B) Blowers (C) Fans (D) Compressors

Description : Which of the following produces maximum pressure difference for transportation of gases? (A) Vacuum pumps (B) Blowers (C) Fans (D) Compressors

Last Answer : (D) Compressors

At one atmosphere, a cylinder with movable piston contains 2,000 milliliters of gas. If the pressure is increased to 5 atmospheres and the temperature remains unchanged, what is the new volume of the gas? w) 10,000 milliliters x) 400 milliliters y) 1,000 milliliters z) 4,000 milliliters

Description : At one atmosphere, a cylinder with movable piston contains 2,000 milliliters of gas. If the pressure is increased to 5 atmospheres and the temperature remains unchanged, what is the new volume of the gas? w) 10,000 milliliters x) 400 milliliters y) 1,000 milliliters z) 4,000 milliliters

Last Answer : ANSWER: X -- 400 MILLILITERS

How many molecules of an ideal gas are there in 22.414 liters at 10 atmospheres pressure and 0 degrees C?

Description : How many molecules of an ideal gas are there in 22.414 liters at 10 atmospheres pressure and 0 degrees C? 

Last Answer : ANSWER: 6.02 x 1024 (or accept 10 x AVAGADRO'S NUMBER) 

The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Description : The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Last Answer : Answer : D

Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, 49, 50, 74, 75, 99,100 B. 10, 50, 75,100, 250, 1000 C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101

……………….. is a high performance fiber optic token ring LAN running at 100 Mbps over distances upto 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Description : ……………….. is a high performance fiber optic token ring LAN running at 100 Mbps over distances upto 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Last Answer : A) FDDI

Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Description : Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Last Answer : (A) < 1

Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Last Answer : (A) 600-750

Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Description : Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Last Answer : (B) 650

Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Description : Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Last Answer : (B) 250-400

For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Description : For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Last Answer : (B) 500

The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml

Description : The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml

Last Answer : Answer : C

The total serum testosterone in adult men is (A) 50–100 ng/100 ml (B) 150–250 ng/100 ml (C) 300–1000 ng/100 ml (D) 1000–3000 ng/100 ml

Description : The total serum testosterone in adult men is (A) 50–100 ng/100 ml (B) 150–250 ng/100 ml (C) 300–1000 ng/100 ml (D) 1000–3000 ng/100 ml

Last Answer : Answer : C

Prepayment of postage on cash facility is authorized by and how much letter may be posted to have these facility. a) HOC, UR-500 big city and 250 small city, Reg -50 b) DG post, UR-1000 big city and 500 small city, Reg -100 c) Head of the division UR-5000 big city and 1000 small city, Reg -500 d) None of these

Description : Prepayment of postage on cash facility is authorized by and how much letter may be posted to have these facility. a) HOC, UR-500 big city and 250 small city, Reg -50 b) DG post, UR-1000 big city and 500 ... -100 c) Head of the division UR-5000 big city and 1000 small city, Reg -500 d) None of these

Last Answer : a) HOC, UR-500 big city and 250 small city, Reg -50

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : 250-350 genes

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : .250-350 genes

What is the range of minimum set of genes required for life? A- 50-100 genes B- 250-350 genes C- 1000-1500 genes D- 1500-2000 genes

Description : What is the range of minimum set of genes required for life? A- 50-100 genes B- 250-350 genes C- 1000-1500 genes D- 1500-2000 genes

Last Answer : 250-350 genes

Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range between (A) 100 to 250 (B) 250 to 500 (C) 500 to 750 (D) 750 to 1000

Description : Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range  between  (A) 100 to 250  (B) 250 to 500  (C) 500 to 750  (D) 750 to 1000 

Last Answer : (C) 500 to 750 

A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made is nearly equal to (A) 25 (B) 50 (C) 100 (D) 250

Description : A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made is  nearly equal to  (A) 25  (B) 50  (C) 100  (D) 250 

Last Answer : (B) 50 

One cubic metre of water weighs (A) 100 litres (B) 250 litres (C) 500 litres (D) 1000 litres

Description : One cubic metre of water weighs (A) 100 litres (B) 250 litres (C) 500 litres (D) 1000 litres

Last Answer : Answer: Option D

One litre of water occupies a volume of (A) 100 cm3 (B) 250 cm3 (C) 500 cm3 (D) 1000 cm3

Description : One litre of water occupies a volume of (A) 100 cm3 (B) 250 cm3 (C) 500 cm3 (D) 1000 cm3

Last Answer : Answer: Option A

Test sorting or practical, sorting with qualifying speed of _____ letters per hour for outward sorting and ______ per hour for distribution of letter for delivery beats allowing for a max eight mistake in either cases a) 100, 50 b) 1000,500 c) 1000,600 d) None of these

Description : Test sorting or practical, sorting with qualifying speed of _____ letters per hour for outward sorting and ______ per hour for distribution of letter for delivery beats allowing for a max eight mistake in either cases a) 100, 50 b) 1000,500 c) 1000,600 d) None of these

Last Answer : c) 1000,600

Limit of VP and ins article for delivery at addressee place is a) 100, 500 b) 500,1000 c) 1000,5000 d) No limit

Description : Limit of VP and ins article for delivery at addressee place is a) 100, 500 b) 500,1000 c) 1000,5000 d) No limit

Last Answer : a) 100, 500

Electrical machines having power outputs ranging from a few kW upto approximately 250 kW may be classified as (a) small size machines (b) medium size machines (c) large size machines (d) any ofthe above

Description : Electrical machines having power outputs ranging from a few kW upto approximately 250 kW may be classified as (a) small size machines (b) medium size machines (c) large size machines (d) any ofthe above

Last Answer : (b) medium size machines

Ordinarily cash in excess of Rs __________ should be enclosed in a cash bag a) 500 b) 1000 c) 5000 d) 250

Description : Ordinarily cash in excess of Rs __________ should be enclosed in a cash bag a) 500 b) 1000 c) 5000 d) 250

Last Answer : d) 250

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85

While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000

Description : While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000

Last Answer : (C) 4500

Rotary compressors are used for delivering A. Small quantities of air at high pressure B. Large quantities of air at high pressure C. Small quantities of air at low pressure D. Large quantities of air at low pressure

Description : Rotary compressors are used for delivering A. Small quantities of air at high pressure B. Large quantities of air at high pressure C. Small quantities of air at low pressure D. Large quantities of air at low pressure

Last Answer : ANSWER : D

Which one of the following statements is correct? A. Reciprocating compressors are used to supply large quantities of air at a lower pressure ratio B. Centrifugal compressors are used to supply large quantities of air at a lower pressure ratio C. Centrifugal compressors are used to supply small quantities of air at a lower pressure ratio D. Centrifugal compressors cannot be run at high speed because of impeller, diffuser and casing.

Description : Which one of the following statements is correct? A. Reciprocating compressors are used to supply large quantities of air at a lower pressure ratio B. Centrifugal compressors are used to supply ... . Centrifugal compressors cannot be run at high speed because of impeller, diffuser and casing.

Last Answer : ANSWER : B

List the advantages of keeping the discharge pressure for reciprocating compressors at minimum.

Description : List the advantages of keeping the discharge pressure for reciprocating compressors at minimum. 

Last Answer : Lower power consumption Less load on the piston rods and hence reduced maintenance costs Lower leakage losses

Which of the statement is “True” for centrifugal compressors? a) The compressor should not be operated at full load b) The compressor should be operated at shut off pressure c) The compressor should not be operated with inlet-guide vane control d) The compressor should not be operated close to the surge point

Description : Which of the statement is True for centrifugal compressors? a) The compressor should not be operated at full load b) The compressor should be operated at shut off pressure c) The ... operated with inlet-guide vane control d) The compressor should not be operated close to the surge point 

Last Answer : d) The compressor should not be operated close to the surge point

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

A hardness depth of about 3 mm can be achieved by induction hardness in __________ seconds. (A) 5 (B) 100 (C) 250 (D) 500

Description : A hardness depth of about 3 mm can be achieved by induction hardness in __________ seconds. (A) 5 (B) 100 (C) 250 (D) 500

Last Answer : (A) 5

Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Description : Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Last Answer : (A) 5

Fermentation of molasses to produce ethyl alcohol is done at __________ °C. (A) 20 - 30 (B) < - 5 (C) 100 - 150 (D) 250 - 300

Description : Fermentation of molasses to produce ethyl alcohol is done at __________ °C. (A) 20 - 30 (B) < - 5 (C) 100 - 150 (D) 250 - 300

Last Answer : (A) 20 - 30

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Last Answer : (A) 15-30

In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Last Answer : (C) 1000-10000

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

Electro-magnetic spectrum range, which is important for radiation varies from __________ microns. (A) 1 to 100 (B) 0.5 to 50 (C) 10 to 100 (D) 100 to 1000

Description : Electro-magnetic spectrum range, which is important for radiation varies from __________ microns. (A) 1 to 100 (B) 0.5 to 50 (C) 10 to 100 (D) 100 to 1000

Last Answer : (B) 0.5 to 50