The maximum head that can be developed by a single impeller is __________ ft(A) 25(B) 100(C) 250-300(D) 1000.

The maximum head that can be developed by a single impeller is
__________ ft.
(A) 25
(B) 100
(C) 250-300
(D) 1000
by

1 Answer

Answer :

(C) 250-300
by

Related questions

Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Description : Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Last Answer : (A) D = 1840 H0.5 /N

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Description : Theoretical head developed by a centrifugal pump does not depend upon the __________ the impeller. (A) Radius of (B) Speed of (C) Fluid velocity leaving (D) None of these

Last Answer : (D) None of these

In case of a centrifugal pump, the theoretical head developed is dependent on the __________ the impeller. (A) Speed of (B) Diameter of (C) Fluid velocity leaving (D) All (A), (B) and (C)

Description : In case of a centrifugal pump, the theoretical head developed is dependent on the __________ the impeller. (A) Speed of (B) Diameter of (C) Fluid velocity leaving (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The maximum delivery pressure of compressors can be upto __________ atmospheres. (A) 10 (B) 100 (C) 250 (D) 1000

Description : The maximum delivery pressure of compressors can be upto __________ atmospheres. (A) 10 (B) 100 (C) 250 (D) 1000

Last Answer : (D) 1000

Head developed by a centrifugal pump depends on its (A) Speed (B) Impeller diameter (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Head developed by a centrifugal pump depends on its (A) Speed (B) Impeller diameter (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : C) Both (A) and (B)

The head developed by a centrifugal pump is largely determined by the (A) Power of the pump(B) Nature of the liquid being pumped(C) Angle of the vanes and the speed of the tip of the impeller(D) Vapour pressure of the liquid

Description : The head developed by a centrifugal pump is largely determined by the (A) Power of the pump (B) Nature of the liquid being pumped (C) Angle of the vanes and the speed of the tip of the impeller (D) Vapour pressure of the liquid

Last Answer : (C) Angle of the vanes and the speed of the tip of the impeller

The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml

Description : The daily water allowance for normal infant is about (A) 100–200 ml (B) 250–300 ml (C) 330–1000 ml (D) 1000–2000 ml

Last Answer : Answer : C

The total serum testosterone in adult men is (A) 50–100 ng/100 ml (B) 150–250 ng/100 ml (C) 300–1000 ng/100 ml (D) 1000–3000 ng/100 ml

Description : The total serum testosterone in adult men is (A) 50–100 ng/100 ml (B) 150–250 ng/100 ml (C) 300–1000 ng/100 ml (D) 1000–3000 ng/100 ml

Last Answer : Answer : C

The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Description : The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs

Last Answer : Answer : D

What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Description : What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Last Answer : B.25mi

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

In case of a centrifugal pump, the ratio of total delivered pressure to pressure developed with the impeller is called the __________ efficiency. (A) Manometric (B) Mechanical (C) Volumetric (D) Overall

Description : In case of a centrifugal pump, the ratio of total delivered pressure to pressure developed with the impeller is called the __________ efficiency. (A) Manometric (B) Mechanical (C) Volumetric (D) Overall

Last Answer : (A) Manometric

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

Which of the following options will facilitate the achievement of a very high head (say 30 metres) in case of a centrifugal pump? (A) Increasing the impeller speed and the volute area (B) Increasing the number of vanes in the impeller (C) Mounting of two or more impellers in series on a single shaft (D) Either of (A), (B) or (C)

Description : Which of the following options will facilitate the achievement of a very high head (say 30 metres) in case of a centrifugal pump? (A) Increasing the impeller speed and the volute area (B) Increasing the number of vanes ... or more impellers in series on a single shaft (D) Either of (A), (B) or (C)

Last Answer : (C) Mounting of two or more impellers in series on a single shaft

Fermentation of molasses to produce ethyl alcohol is done at __________ °C. (A) 20 - 30 (B) < - 5 (C) 100 - 150 (D) 250 - 300

Description : Fermentation of molasses to produce ethyl alcohol is done at __________ °C. (A) 20 - 30 (B) < - 5 (C) 100 - 150 (D) 250 - 300

Last Answer : (A) 20 - 30

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Last Answer : (A) 15-30

A officer undertakes to complete a job in 250 days. He employs 300 male for 50 days and they complete 1/2 of the work . He then reduces the number of male to 100, who work for 120 days, after which there are 20 days holidays. How many male must be employed for the remaining period to finish the work? a) 25 b) 50 c) 45 d) 35

Description : A officer undertakes to complete a job in 250 days. He employs 300 male for 50 days and they complete 1/2 of the work . He then reduces the number of male to 100, who work for 120 days, after which there ... male must be employed for the remaining period to finish the work? a) 25 b) 50 c) 45 d) 35

Last Answer : B 300 male in 50 days do = 1/2work 1 male in 1 day does = ½*1/50*1/300 work 100 male in 120 days do = ½ *1/50*1/300 *100*120 =2/5 work Total work done = ½ + 2/5 =(5+4)/10=9/10 ... is done in 50 days by 300 male 1/10 work is done in 60 days by =300*50*1*2/10*60 =50 male

Prepayment of postage on cash facility is authorized by and how much letter may be posted to have these facility. a) HOC, UR-500 big city and 250 small city, Reg -50 b) DG post, UR-1000 big city and 500 small city, Reg -100 c) Head of the division UR-5000 big city and 1000 small city, Reg -500 d) None of these

Description : Prepayment of postage on cash facility is authorized by and how much letter may be posted to have these facility. a) HOC, UR-500 big city and 250 small city, Reg -50 b) DG post, UR-1000 big city and 500 ... -100 c) Head of the division UR-5000 big city and 1000 small city, Reg -500 d) None of these

Last Answer : a) HOC, UR-500 big city and 250 small city, Reg -50

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

At a constant speed of the centrifugal pump, it’s __________ the impeller diameter. (A) Capacity varies directly with (B) Head varies as the square of (C) Horsepower varies as the cube of (D) All (A), (B) and (C)

Description : At a constant speed of the centrifugal pump, it’s __________ the impeller diameter. (A) Capacity varies directly with (B) Head varies as the square of (C) Horsepower varies as the cube of (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Description : In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Last Answer : A) Mechanical

A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made is nearly equal to (A) 25 (B) 50 (C) 100 (D) 250

Description : A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made is  nearly equal to  (A) 25  (B) 50  (C) 100  (D) 250 

Last Answer : (B) 50 

Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, 49, 50, 74, 75, 99,100 B. 10, 50, 75,100, 250, 1000 C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101

Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Description : Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Last Answer : (B) 10

In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Last Answer : (C) 1000-10000

Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Last Answer : A) 2 to 3

Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Description : Which of the following arevalid Minimum and Maximum zoom sizes in MSOffice? A. 10, 100 B. 20,250 C. 10, 500 D. 10,1000

Last Answer : 10, 500

Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Last Answer : (C) 50 -100 BTU/hr. ft. 2°F

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

. Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Description : . Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Last Answer : (B) 100-130

Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Last Answer : (D) 1400-1450

Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

With a constant diameter impeller of a centrifugal pump (A) Its capacity varies directly as the square of speed (B) Head varies as the square of speed (C) Horsepower input varies as the square of speed (D) Head varies as the speed

Description : With a constant diameter impeller of a centrifugal pump (A) Its capacity varies directly as the square of speed (B) Head varies as the square of speed (C) Horsepower input varies as the square of speed (D) Head varies as the speed

Last Answer : (B) Head varies as the square of speed

Design of the casing of centrifugal pump should be such as to minimise the (A) Back flow through impeller (B) Loss of kinetic head (C) Loss of static head (D) None of these

Description : Design of the casing of centrifugal pump should be such as to minimise the (A) Back flow through impeller (B) Loss of kinetic head (C) Loss of static head (D) None of these

Last Answer : (B) Loss of kinetic head

Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid from the periphery of the impeller and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Description : Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid ... and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Last Answer : Option D

Normal quantity of urobilinogen excreted in the feces per day is about (A) 10–25 mg (B) 50–250 mg (C) 300–500 mg (D) 700–800 mg FATS AND FATTY ACID METABOLISM 79

Description : Normal quantity of urobilinogen excreted in the feces per day is about (A) 10–25 mg (B) 50–250 mg (C) 300–500 mg (D) 700–800 mg FATS AND FATTY ACID METABOLISM 79

Last Answer : Answer : B

Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Last Answer : (A) 600-750

Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Description : Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Last Answer : (B) 650

Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Description : Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Last Answer : (B) 250-400

For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Description : For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Last Answer : (B) 500

TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100(D) 1000

Description : TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100 (D) 1000

Last Answer : (A) 0.1

The __________ of a double acting reciprocating pump as compared to the single acting pump will be almost double. (A) Flow output (B) Head developed (C) Overall efficiency (D) Weight

Description : The __________ of a double acting reciprocating pump as compared to the single acting pump will be almost double. (A) Flow output (B) Head developed (C) Overall efficiency (D) Weight

Last Answer : Option A

The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

The normal concentration of chlorine in mg/100 ml of C.S.F is about (A) 200 (B) 250 (C) 300 (D) 440

Description : The normal concentration of chlorine in mg/100 ml of C.S.F is about (A) 200 (B) 250 (C) 300 (D) 440

Last Answer : Answer : D

What is the estimated medium wind loading in the Philippines for antenna tower design? A. 300 kph B. 100 kph C. 200 kph D. 250 kph

Description : What is the estimated medium wind loading in the Philippines for antenna tower design? A. 300 kph B. 100 kph C. 200 kph D. 250 kph

Last Answer : C. 200 kph