Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Steam side heat transfer co-efficient in an evaporator is in the range of

__________ kcal/hr.m2°C.

(A) 10-50

(B) 100-500

(C) 1000-1500

(D) 5000-15000

by

1 Answer

Answer :

(D) 5000-15000

by

Related questions

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Last Answer : (C) 50 -100 BTU/hr. ft. 2°F

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Description : A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Last Answer : (B) 4.88 kcal/hr. m. 2°C

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500(D) 4000 to 5000

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Description : Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of __________ kcal/kg. (A) 600-750 (B) 250-350 (C) 1000-1500 (D) 2000-2500

Last Answer : (A) 600-750

Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000

Description : Calorific value of dry wood may be around __________ Kcal/kg. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (A) 5

Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000

Description : Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000

Last Answer : (C) 8000

Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Last Answer : Ans: C

Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Last Answer : 5000-6500 kcal / kg

Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are normally carried out at about __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Last Answer : (B) 900-1000

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient for the cooling water, whether on shell side or tube side is the same. The best arrangement is (A) Vertical heat exchanger with steam on tube side (B) Vertical heat exchanger with steam on shell side (C) Horizontal heat exchanger with steam on tube side (D) Horizontal heat exchanger with steam on shell side

Description : Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient ... ) Horizontal heat exchanger with steam on tube side (D) Horizontal heat exchanger with steam on shell side

Last Answer : (B) Vertical heat exchanger with steam on shell side

The range of electromagnetic spectrum important in heat transfer by radiation is __________ microns. (A) 0.38-0.78 (B) 0.5-50 (C) 100-1000 (D) 5-50

Description : The range of electromagnetic spectrum important in heat transfer by radiation is __________ microns. (A) 0.38-0.78 (B) 0.5-50 (C) 100-1000 (D) 5-50

Last Answer : (B) 0.5-50

Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000

Description : Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000

Last Answer : (C) 6500

Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

The unit of heat transfer co-efficient is (A) BTU/hr. ft 2°F (B) BTU/hr. °F. ft (C) BTU/hr. °F (D) BTU/hr. ft

Description : The unit of heat transfer co-efficient is (A) BTU/hr. ft 2°F (B) BTU/hr. °F. ft (C) BTU/hr. °F (D) BTU/hr. ft

Last Answer : (A) BTU/hr. ft 2°F

Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range between (A) 100 to 250 (B) 250 to 500 (C) 500 to 750 (D) 750 to 1000

Description : Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range  between  (A) 100 to 250  (B) 250 to 500  (C) 500 to 750  (D) 750 to 1000 

Last Answer : (C) 500 to 750 

Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Description : Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Last Answer : (B) 500

Prepayment of postage on cash facility is authorized by and how much letter may be posted to have these facility. a) HOC, UR-500 big city and 250 small city, Reg -50 b) DG post, UR-1000 big city and 500 small city, Reg -100 c) Head of the division UR-5000 big city and 1000 small city, Reg -500 d) None of these

Description : Prepayment of postage on cash facility is authorized by and how much letter may be posted to have these facility. a) HOC, UR-500 big city and 250 small city, Reg -50 b) DG post, UR-1000 big city and 500 ... -100 c) Head of the division UR-5000 big city and 1000 small city, Reg -500 d) None of these

Last Answer : a) HOC, UR-500 big city and 250 small city, Reg -50

Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In a heat exchanger, one transfer unit means (A) A section of the exchanger in which change in temperature of one stream equals the average driving force in the section (B) The size of the exchanger in which heat transfer rate is 1 kcal/hr (C) Both (A) and (B) (D) None of these

Description : In a heat exchanger, one transfer unit means (A) A section of the exchanger in which change in temperature of one stream equals the average driving force in the section (B) The size of the exchanger in which heat transfer rate is 1 kcal/hr (C) Both (A) and (B) (D) None of these

Last Answer : (A) A section of the exchanger in which change in temperature of one stream equals the average driving force in the section

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Description : The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Last Answer : (B) 4 0.8

In case of physical adsorption, the heat of adsorption is of the order of __________ kcal/kg.mole. (A) 100 (B) 1000 (C) 10000 (D) 100000

Description : In case of physical adsorption, the heat of adsorption is of the order of __________ kcal/kg.mole. (A) 100 (B) 1000 (C) 10000 (D) 100000

Last Answer : (B) 1000

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : 250-350 genes

What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Description : What is the range of minimum set of genes required for life? A.50-100 genes B.250-350 genes C.1000-1500 genes D.1500-2000 genes

Last Answer : .250-350 genes

What is the range of minimum set of genes required for life? A- 50-100 genes B- 250-350 genes C- 1000-1500 genes D- 1500-2000 genes

Description : What is the range of minimum set of genes required for life? A- 50-100 genes B- 250-350 genes C- 1000-1500 genes D- 1500-2000 genes

Last Answer : 250-350 genes

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

The maximum heat transfer co-efficient from steam heating will beattained when the steam is: (A) Supersaturated (B) Saturated (C) Wet (D) None of these

Description : The maximum heat transfer co-efficient from steam heating will beattained when the steam is: (A) Supersaturated (B) Saturated (C) Wet (D) None of these

Last Answer : (B) Saturated

One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Description : One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Last Answer : (C) 200 BTU/minute

Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Description : Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________ gms of zinc per m2 of steel strip. (A) 5-10 (B) 1000-1500 (C) 120-500 (D) 1500-3000

Last Answer : Option C

A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Description : A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

Last Answer : (C) Higher steam economy

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively).(A) C/E (B) E/C (C) CE (D) 1/CE

Description : Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively). (A) C/E (B) E/C (C) CE (D) 1/CE

Last Answer : (A) C/E

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Description : If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Last Answer : 1000 bps

If cost of the herbicide is INR 1000 and application cost is INR 500 and net return over weedy is INR 15000, MBCR will be a). 35 b). 25 c). 15 d). 10

Description : If cost of the herbicide is INR 1000 and application cost is INR 500 and net return over weedy is INR 15000, MBCR will be a). 35 b). 25 c). 15 d). 10

Last Answer : d). 10

In case of a vertical tube evaporator, with increase in the liquor level, the __________ is increased. (A) Velocity of circulation (B) Liquor-film co-efficient (C) Both (A) and (B) (D) Neither (A) and (B)

Description : In case of a vertical tube evaporator, with increase in the liquor level, the __________ is increased. (A) Velocity of circulation (B) Liquor-film co-efficient (C) Both (A) and (B) (D) Neither (A) and (B)

Last Answer : (D) Neither (A) and (B)

Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Description : Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Last Answer : (B) Results in making part of the heating surface inactive

For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Description : For a small scale toy factory, the fixed cost per month is Rs. 5000/-. The variable cost per toy is Rs. 20 and sales price is Rs. 30 per toy. The break even production per month will be __________ toys. (A) 250 (B) 500 (C) 1000 (D) 3000

Last Answer : (B) 500

Normal values of overflow rate for sedimentation tanks using coagulants in litres/hr/m2 , generally range between (A) 250 to 500 (B) 500 to 750 (C) 750 to 1000 (D) 1000 to 1250

Description : Normal values of overflow rate for sedimentation tanks using coagulants in litres/hr/m2 , generally range between (A) 250 to 500 (B) 500 to 750 (C) 750 to 1000 (D) 1000 to 1250

Last Answer : (D) 1000 to 1250

Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100

Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100

Last Answer : (B) ∞

The calorific value of 'LPG' (50% propane + 50% butane) is about __________ kcal/Nm3 . (A) 5000 (B) 25,000 (C) 10,000 (D) 15,000

Description : The calorific value of 'LPG' (50% propane + 50% butane) is about __________ kcal/Nm3 . (A) 5000 (B) 25,000 (C) 10,000 (D) 15,000

Last Answer : (B) 25,000

A minimum yearly deposit of ________ is required to open and maintain a PPF account, and a maximum deposit of _____. A. Rs. 500 and Rs 1.50 lakhs B. Rs. 1000 and Rs 2.50 lakhs C. Rs. 2000 and Rs 3.50 lakhs D. Rs. 5000 and Rs 4.50 lakhs

Description : A minimum yearly deposit of ________ is required to open and maintain a PPF account, and a maximum deposit of _____. A. Rs. 500 and Rs 1.50 lakhs B. Rs. 1000 and Rs 2.50 lakhs C. Rs. 2000 and Rs 3.50 lakhs D. Rs. 5000 and Rs 4.50 lakhs

Last Answer : A. Rs. 500 and Rs 1.50 lakhs Explanation: A minimum yearly deposit of Rs. 500 is required to open and maintain a PPF account, and a maximum deposit of Rs.1.5 lakhs (as on Financial year 2015- ... Income Tax Act. The amount can be deposited in lump sum or in a maximum of 12 instalments per year.

The seed capital of Bharatiya Mahila Bank is ________ A. Rs.5000 crore B. Rs.1000 crore C. Rs.500 crore D. Rs.100 crore E. None of the above

Description : The seed capital of Bharatiya Mahila Bank is ________ A. Rs.5000 crore B. Rs.1000 crore C. Rs.500 crore D. Rs.100 crore E. None of the above

Last Answer : B. Rs.1000 crore Explanation: Bharatiya Mahila Bank (BMB) is an Indian financial services banking company based in New Delhi, India. India is the third country in the world to have a bank especially for women, after Pakistan and Tanzania.The Bank‘s initial capital consists of Rs 1,000 crores.