Description : Fermentator temperature during production of alcohol from molasses is around __________ °C. (A) 5 (B) 30 (C) 130 (D) 300
Last Answer : (B) 30
Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0
Last Answer : (A) 15-30
Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280
Last Answer : (D) 250-280
Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300
Last Answer : (B) 60-70
Description : Production of alcohol by fermentation of molasses is a/an __________ process. (A) Anaerobic (B) Aerobic (C) Endothermic (D) Both (B) and (C)
Last Answer : (B) Aerobic
Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300
Last Answer : (C) 350-400
Description : __________ is produced using molasses as the starting raw material. (A) Methyl alcohol (B) Ethyl alcohol (C) Benzol (D) Dimethyl ether
Last Answer : (B) Ethyl alcohol
Description : 1. Which organ breaks fat to produce cholesterol? 2. By whom the salary and perquisites of the Prime Minister of India are decided? 3. During the fermentation of sugar, which enzyme which converts ... any delta at its mouth? 20. Who presided over the first Buddhist Council held at Rajgriha ?
Last Answer : Answer : 1. Liver 2. Parliament 3. zymase 4. Equator 5. Abdur Rahim 6. Protection of human rights 7. Lungs 8. Leaf 9. F. Galton 10. Town planning and drainage 11. The Ministry is dissolved 12. ... property 16. Loss of the sense of smell 17. Insects 18. Nagaland 19. Tapti & Narmada 20. Maha Kassapa
Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270
Last Answer : (A) 80-170
Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450
Last Answer : (D) 1400-1450
Description : The fermenter used for the production of ethyl alcohol from molasses is made of (A) Wood (B) Concrete (C) Copper bearing steel (D) Porcelain
Last Answer : (C) Copper bearing steel
Description : The process used for the manufacture of ethyl alcohol from molasses is (A) Distillation (B) Dehydration (C) Dehydrogenation (D) None of these
Last Answer : (D) None of these
Description : Ethyl alcohol cannot be produced (A) From waste sulphite substrate of paper mills (B) By Esterification and hydrolysis of ethylene (C) From molasses (D) None of these
Description : . Starting material for the commercial production of ethyl alcohol in India is (A) Rice (B) Molasses (C) Fruit of Mahua tree (D) Maize
Last Answer : (B) Molasses
Description : Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80
Last Answer : (C) 30 to 50
Description : The method used to obtain alcohol from molasses is called – (1) distillation (2) hydrolysis (3) fermentation (4) oxidation
Last Answer : (3) fermentation Explanation: On industrial scale, ethanol can be prepared by the fermentation of molasses. Molasses is the mother liquor left after the crystallization of sugarcane juice. It is a dark colored viscous liquid. Molasses contains about 60% fermentable sugar.
Description : The method used to obtain alcohol from molasses is called (1) distillation (2) hydrolysis (3) fermentation (4) oxidation
Last Answer : fermentation
Description : Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100
Last Answer : (A) 150-300
Description : Brinell Hardness Number (BHN) for talc is approximately in the range of (A) 1-5 (B) 20-30 (C) 100 -150 (D) 200 - 250
Last Answer : (B) 20-30
Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch
Last Answer : (A) Catalytic dehydrogenation of ethyl benzene
Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (C) 250-280
Description : Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900
Last Answer : (B) 250-400
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (B) 10-30
Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300
Last Answer : (B) 1 and 200
Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450
Last Answer : (B) 150
Description : Flash point of motor gasoline may be around __________ °C. (A) 10 (B) 45 (C) 100 (D) 150
Last Answer : (B) 45
Description : Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. (A) 50 (B) 100 (C) 150
Last Answer : (C) 150
Description : The temperature at which plastic layer formation takes place during carbonisation of coal varies from __________ °C. (A) 100 to 150 (B) 350 to 450 (C) 550 to 650 (D) 700 to 850
Last Answer : (B) 350 to 450
Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200
Last Answer : (B) 100
Description : The total serum testosterone in adult men is (A) 50–100 ng/100 ml (B) 150–250 ng/100 ml (C) 300–1000 ng/100 ml (D) 1000–3000 ng/100 ml
Last Answer : Answer : C
Description : The amount of coproporphyrins excreted per day in feces is about (A) 10–50 µgs (B) 100–150 µgs (C) 200–250 µgs (D) 300–1000 µgs
Last Answer : Answer : D
Description : In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2
Last Answer : (A) 100 kg/cm2
Description : Traditionally, waste heat of low temperature range ________ has not been used for electricitygeneration despite efforts by ORC companies, mainly because the Carnot efficiency is rather low. a) 0-250 °C b) 0-150 °C c) 0-200 °C d) 0-120 °C
Last Answer : 0-120 °C
Description : During the fermentation of sugar, which enzyme which converts glucose into ethyl alcohol? -Do You Know?
Last Answer : answer:
Description : During fermentation of sugar, the compound which is always formed is – (1) Methyl Alcohol (2) Ethyl Alcohol (3) Acetic Acid (4) Ethylene
Last Answer : (2) Ethyl Alcohol Explanation: Fermentation is the conversion of sugar into car-bon dioxide has (CO2) and ethyl alcohol. This process is carried out by yeast cells using a range of enzymes.
Description : Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles
Last Answer : Methyl alcohol is produced by fermentation of sugars
Description : In fermentation reactions occurring in yeast, two products of metabolism are ______ and ______. a. Acid; Hydrogen Gas b. Hydrogen Gas; Sucrose c. Ethyl Alcohol; Methane d. Carbon Dioxide; Ethyl Alcohol
Last Answer : a. Acid; Hydrogen Gas
Description : During the fermentation of sugar, which enzyme which converts glucose into ethyl alcohol?
Last Answer : zymase
Description : During fermentation of sugar, the compound which is always formed is : (1) Methyl Alcohol (2) Ethyl Alcohol (3) Acetic Acid (4) Ethylene
Last Answer : Ethyl Alcohol
Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200
Last Answer : (A) 700 - 1000
Description : Flash point of most vegetable oils is about __________ °C. (A) 50 (B) 100 (C) 200 (D) 300
Last Answer : (C) 200
Description : A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300
Last Answer : (A) 370
Description : Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400
Last Answer : (B) 30-80
Description : The two enzymes present in yeast that are responsible for the formation of ethylalcohol from molasses in the fermentation process are
Last Answer : The two enzymes present in yeast that are responsible for the formation of ethylalcohol from molasses ... C. Zymase, diastase D. Invertase, maltase
Description : Assertion(A): In the fermentation process of molasses, along with yeast `(NH_(4))_(2)SO_(4), (NH_(4))_(3) PO_(4)` is added Reason (R): `(NH_(4))_(3)PO
Last Answer : Assertion(A): In the fermentation process of molasses, along with yeast `(NH_(4))_(2)SO_(4), (NH_(4))_ ... but R is false D. A is false but R is true
Description : The temperature range necessary for fermentation of molasses is
Last Answer : 308 K to 313K.
Description : The maximum head that can be developed by a single impeller is __________ ft. (A) 25 (B) 100 (C) 250-300 (D) 1000
Last Answer : (C) 250-300
Description : Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250
Last Answer : (B) 130
Description : Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000
Last Answer : (B) 650