Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Exothermic condensation reaction of monochlorobenzene with chloral
in presence of 20% oleum as catalyst produces DDT. The reaction
temperature is maintained at __________ °C.
(A) 15-30
(B) 90-100
(C) 250-300
(D) < 0
by

1 Answer

Answer :

(A) 15-30
by

Related questions

Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral is obtained by the chlorination of ethyl alcohol (C) Insecticides acting on the insects through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Description : Pick out the wrong statement. (A) DDT is manufactured by the condensation of chlorobenzene with chloral at 30°C in presence of oleum, which is a highly exothermic reaction (B) Chloral ... through the respiratory system are called fumigants (D) Benzene hexachloride is not a contact insecticide

Last Answer : (D) Benzene hexachloride is not a contact insecticide

The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Description : The catalyst used in the manufacture of DDT (from chloral and chlorobenzene) is (A) Dilute H2SO4 (B) Oleum (C) Ultraviolet light (D) None of these

Last Answer : (B) Oleum

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (C) 250-280

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30(C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (B) 10-30

The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Description : The catalyst used in the manufacture of DDT is (A) Alumina (B) Silica (C) 20% oleum (D) Aluminium chloride

Last Answer : (C) 20% oleum

DDT should not be allowed to come in contact with iron (during itsmanufacture) to(A) Avoid its decomposition(B) Prevent sulphonation of the monochlorobenzene by the acid catalyst(C) Achieve non-hygroscopic property(D) None of thes

Description : DDT should not be allowed to come in contact with iron (during itsmanufacture) to (A) Avoid its decomposition (B) Prevent sulphonation of the monochlorobenzene by the acid catalyst (C) Achieve non-hygroscopic property (D) None of thes

Last Answer : (A) Avoid its decomposition

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

DDT is prepared by the reaction of chlorobenzene with (in the presence of conc. H2SO4) (a) Chloral (b) Chlorine (c) Chloroform (d) Carbon tetrachloride

Description : DDT is prepared by the reaction of chlorobenzene with (in the presence of conc. H2SO4) (a) Chloral (b) Chlorine (c) Chloroform (d) Carbon tetrachloride

Last Answer : Chloral

Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Description : Fusion zone in the electric furnace used for reduction of phosphate rock to elemental phosphorous is maintained at __________ °C. (A) 250-300 (B) 500-750 (C) 950-1050 (D) 1400-1450

Last Answer : (D) 1400-1450

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Last Answer : (B) 1 and 200

Fermentation of molasses to produce ethyl alcohol is done at __________ °C. (A) 20 - 30 (B) < - 5 (C) 100 - 150 (D) 250 - 300

Description : Fermentation of molasses to produce ethyl alcohol is done at __________ °C. (A) 20 - 30 (B) < - 5 (C) 100 - 150 (D) 250 - 300

Last Answer : (A) 20 - 30

A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300

Description : A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300

Last Answer : (A) 370

Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200

Last Answer : (A) 700 - 1000

Chloral is used in the manufacture of (A) DDT (B) BHC (C) Parathion (D) None of these

Description : Chloral is used in the manufacture of (A) DDT (B) BHC (C) Parathion (D) None of these

Last Answer : (A) DDT

Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Description : Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

20% oleum means that in 100 kg oleum, there are 20 kg of (A) SO3 and 80kg of H2SO4 (B) H2SO4 and 80kg of SO3 (C) SO3 for each 100 kg of H2SO4 (D) None of these

Description : 20% oleum means that in 100 kg oleum, there are 20 kg of (A) SO3 and 80kg of H2SO4 (B) H2SO4 and 80kg of SO3 (C) SO3 for each 100 kg of H2SO4 (D) None of these

Last Answer : (A) SO3 and 80kg of H2SO4

Fermentator temperature during production of alcohol from molasses is around __________ °C. (A) 5(B) 30 (C) 130 (D) 300

Description : Fermentator temperature during production of alcohol from molasses is around __________ °C. (A) 5 (B) 30 (C) 130 (D) 300

Last Answer : (B) 30

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Flash point of most vegetable oils is about __________ °C. (A) 50 (B) 100 (C) 200 (D) 300

Description : Flash point of most vegetable oils is about __________ °C. (A) 50 (B) 100 (C) 200 (D) 300

Last Answer : (C) 200

Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Description : Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Last Answer : (B) 130

Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Description : Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Last Answer : (B) 30-80

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Last Answer : (B) 200-300

Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Description : Which is the most efficient absorbent for SO3 out of the following? (A) 20% oleum (B) 65% oleum (C) 78% H2SO4 (D) 98% H2SO4

Last Answer : (D) 98% H2SO4

Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700

Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700

Last Answer : (C) 700

The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500

Description : The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500

Last Answer : (C) 2000-2200

Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900

Description : Low temperature carbonisation of coal takes place at __________ °C. (A) 300 (B) 1100 (C) 700 (D) 900

Last Answer : (C) 700

Keeping the pressure constant, to double the volume of a given mass of an ideal gas at 27°C, the temperature should be raised to __________ °C. (A) 270 (B) 327 (C) 300 (D) 540

Description : Keeping the pressure constant, to double the volume of a given mass of an ideal gas at 27°C, the temperature should be raised to __________ °C. (A) 270 (B) 327 (C) 300 (D) 540

Last Answer : (B) 327

Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Last Answer : (D) 1000-1100

Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100

Description : Temperature attained in soldering of metals is about __________ °C. (A) 150-300 (B) 400-500 (C) 650-800 (D) 1000-1100

Last Answer : (A) 150-300

Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800

Description : Recrystallisation temperature of steel is __________ °C. (A) 50 (B) 300 (C) 500 (D) 800

Last Answer : (D) 800

The compound formed on heating chlorobenzene with chloral in te presence of concentrated sulphuric acid is

Description : The compound formed on heating chlorobenzene with chloral in te presence of concentrated sulphuric acid is

Last Answer : The compound formed on heating chlorobenzene with chloral in te presence of concentrated sulphuric acid is ... B. DDT C. freon D. Hexachloroethane

Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140

Description : Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C. (A) 50 (B) 70 (C) 90 (D) 140

Last Answer : (C) 90

Temperature maintained in the emulsion polymerisation reactor for PVC manufacture is about __________ ° C. (A) -20 (B) 50 (C) 250 (D) 500

Description : Temperature maintained in the emulsion polymerisation reactor for PVC manufacture is about __________ ° C. (A) -20 (B) 50 (C) 250 (D) 500

Last Answer : (B) 50

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Description : While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Last Answer : (B) 2000

Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100

Description : Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100

Last Answer : (B) 750

More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2

Last Answer : (B) H2SO4

The maximum head that can be developed by a single impeller is __________ ft(A) 25(B) 100(C) 250-300(D) 1000.

Description : The maximum head that can be developed by a single impeller is __________ ft. (A) 25 (B) 100 (C) 250-300 (D) 1000

Last Answer : (C) 250-300

Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Description : Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Last Answer : (B) 650

Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Description : Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Last Answer : (B) 250-400

Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80

Description : Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80

Last Answer : (C) 30 to 50

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Description : The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Last Answer : (C) Remain unaffected

The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Description : The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Last Answer : (C) Remain unaffected

Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Description : Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4

Last Answer : (C) SO3