The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour pressure of liquid. (A) Equal to (B) Less than (C) More than (D) None of these

The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour
pressure of liquid.
(A) Equal to
(B) Less than
(C) More than
(D) None of these
by

1 Answer

Answer :

Answer: Option C
by

Related questions

What is the pipe called which lifts water from a reservoir to a greater height than the initial level in the supply reservoir? (A) Penstock (B) Siphon (C) Tunnel (D) Pressure pipeline

Description : What is the pipe called which lifts water from a reservoir to a greater height than the initial level in the supply reservoir? (A) Penstock (B) Siphon (C) Tunnel (D) Pressure pipeline

Last Answer : (B) Siphon

An inverted siphon is designed generally for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Description : An inverted siphon is designed generally for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Last Answer : ANS: C

For sewers, inverted siphon is provided for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Description : For sewers, inverted siphon is provided for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Last Answer : ANS: C

Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Description : Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Last Answer : Answer: Option A

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid(C) Equal to the vapour pressure of the liquid(D) Less than barometric pressure

Description : Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid (C) Equal to the vapour pressure of the liquid (D) Less than barometric pressure

Last Answer : (A) Greater than the vapour pressure of the liquid

Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Description : Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Last Answer : (A) Less than the vapour pressure of the liquid at that temperature

Moisture in a substance exerting an equilibrium vapour pressure less than that of pure liquid at the same temperature is called the __________ moisture. (A) Bound (B) Unbound (C) Critical (D) None of these

Description : Moisture in a substance exerting an equilibrium vapour pressure less than that of pure liquid at the same temperature is called the __________ moisture. (A) Bound (B) Unbound (C) Critical (D) None of these

Last Answer : (A) Bound

Radiation heat losses from satisfactorily insulated high pressure boiler may be about __________ percent. (A) 1 (B) 7 (C) 18

Description : Radiation heat losses from satisfactorily insulated high pressure boiler may be about __________ percent. (A) 1 (B) 7 (C) 18

Last Answer : (B) 7

Mercury is often used in barometer because (A) It is the best liquid (B) The height of barometer will be less (C) Its vapour pressure is so low that it may be neglected (D) Both (B) and (C)

Description : Mercury is often used in barometer because (A) It is the best liquid (B) The height of barometer will be less (C) Its vapour pressure is so low that it may be neglected (D) Both (B) and (C)

Last Answer : Answer: Option D

Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Description : Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Last Answer : (A) Unbound

An air vessel is provided at the summit in a siphon to (A) Avoid interruption in the flow (B) Increase discharge (C) Increase velocity (D) Maintain pressure difference

Description : An air vessel is provided at the summit in a siphon to (A) Avoid interruption in the flow (B) Increase discharge (C) Increase velocity (D) Maintain pressure difference

Last Answer : Answer: Option A

The vapour pressure over the concave surface is (A) Less man the vapour pressure over the plane surface (B) Equal to the vapour pressure over the plane surface (C) Greater than the vapour pressure over the plane surface (D) Zero

Description : The vapour pressure over the concave surface is (A) Less man the vapour pressure over the plane surface (B) Equal to the vapour pressure over the plane surface (C) Greater than the vapour pressure over the plane surface (D) Zero

Last Answer : Answer: Option A

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

The factional resistance of a pipe varies approximately with __________ of the liquid. (A) Pressure (B) Velocity (C) Square of velocity (D) Cube of velocit

Description : The factional resistance of a pipe varies approximately with __________ of the liquid. (A) Pressure (B) Velocity (C) Square of velocity (D) Cube of velocit

Last Answer : Answer: Option C

In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure __________ that if the same plate is immersed perpendicular to the flow. (A) Less than (B) More than (C) Equal to (D) None of these

Description : When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure __________ that if the same plate is immersed perpendicular to the flow. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

When a liquid is flowing through a pipe, the velocity of the liquid is (A) Maximum at the centre and minimum near the walls (B) Minimum at the centre and maximum near the walls (C) Zero at the centre and maximum near the walls (D) Maximum at the centre and zero near the walls

Description : When a liquid is flowing through a pipe, the velocity of the liquid is (A) Maximum at the centre and minimum near the walls (B) Minimum at the centre and maximum near the walls (C) Zero at the centre and maximum near the walls (D) Maximum at the centre and zero near the walls

Last Answer : Answer: Option A

In Azeotropic mixture, the equilibrium vapour composition is (A) More than liquid composition (B) Less than liquid composition (C) Same as liquid composition (D) Independent of pressure

Description : In Azeotropic mixture, the equilibrium vapour composition is (A) More than liquid composition (B) Less than liquid composition (C) Same as liquid composition (D) Independent of pressure

Last Answer : (C) Same as liquid composition

Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Description : Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it satisfactorily (C) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Description : Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it ... ) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Last Answer : (D) All the above

A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Description : A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Last Answer : (A) Sub-cooled

At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Description : At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Last Answer : (C) Same

14. A siphon is used to connect two reservoirs at different levels intervened by a high ridge. A) True B) False

Description : 14. A siphon is used to connect two reservoirs at different levels intervened by a high ridge. A) True B) False

Last Answer : A

To avoid an interruption in the flow of a siphon, an air vessel is provided (A) At the inlet (B) At the outlet (C) At the summit (D) At any point between inlet and outle

Description : To avoid an interruption in the flow of a siphon, an air vessel is provided (A) At the inlet (B) At the outlet (C) At the summit (D) At any point between inlet and outle

Last Answer : Answer: Option C

Consider the following statements : 1. In a super-passage, the drain runs over the canal 2. In a siphon, the drain runs below the canal 3. In a siphon aqueduct, type- II, the canal banks are made of RCC walls Which of these statements are correct ? a) 1 only b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements : 1. In a super-passage, the drain runs over the canal 2. In a siphon, the drain runs below the canal 3. In a siphon aqueduct, type- II, the canal banks are made of RCC walls Which of ... are correct ? a) 1 only b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution is proportional to the mole fraction in the vapour (C) Vapour pressure is equal to the product of the mole fraction and total pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Description : Henry's law states that the (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid (B) Partial pressure of a component over a solution ... pressure (D) Partial pressure is equal to the product of the mole fraction and total pressure

Last Answer : (A) Partial pressure of a component over a solution is proportional to its mole fraction in the liquid

In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because(A) Temperature is less(B) Total pressure is less(C) Mixing of steam with the material being vaporised is not so intimate asto result in equilibrium condition(D) Saturated steam is used for steam distillation

Description : In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because (A) Temperature is less (B) Total pressure is less (C) Mixing of steam ... not so intimate as to result in equilibrium condition (D) Saturated steam is used for steam distillation

Last Answer : (C) Mixing of steam with the material being vaporised is not so intimate as to result in equilibrium condition

True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Description : True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Last Answer : (D) May be either more or less than

The force of buoyancy is always __________ the weight of the liquid displaced by the body. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The force of buoyancy is always __________ the weight of the liquid displaced by the body. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option A

The body will float if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The body will float if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

The body will sink down if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The body will sink down if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option B

The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The  expected pressure due to water hammer is 7.5 kg/cm2  in a pressure conduit of diameter 1 m.  Assuming the efficiency of the ... , is  (A) 10 mm  (B) 15 mm  (C) 20 mm  (D) 25 mm 

Last Answer : (C) 20 mm

At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be (A) Minimum (B) Maximum (C) Zero (D) Could be any value

Description : At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be (A) Minimum (B) Maximum (C) Zero (D) Could be any value

Last Answer : Answer: Option D

State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

Star/star transformers work satisfactorily when?

Last Answer : Star/star transformers work satisfactorily when load is balanced .

For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Description : For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Last Answer : (C) Number of plates required will be maximum

Barometer is used to measure (A) Velocity of liquid(B) Atmospheric pressure (C) Pressure in pipes and channels (D) Difference of pressure between two points in a pipe

Description : Barometer is used to measure (A) Velocity of liquid (B) Atmospheric pressure (C) Pressure in pipes and channels (D) Difference of pressure between two points in a pipe

Last Answer : Answer: Option B

A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Description : A venturi-flume is used to measure (A) Pressure of liquid (B) Discharge of liquid (C) Pressure difference between two points in a channel (D) Pressure difference between two points in a pipe

Last Answer : Answer: Option B

A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Description : A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Last Answer : Answer: Option A

Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Description : Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Last Answer : Answer: Option C

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

Pick up the correct statement from the following: (A) Absolute humidity at a given temperature is equal to weight of moisture present in a unit volume (B) Relative humidity is the ratio of actual vapour pressure and saturation vapour pressure at the same temperature (C) Relative humidity is the ratio of the weight of the vapours present per unit volume to the weight of vapours which could be contained at the same temperature when fully saturated (D) All the above

Description : Pick up the correct statement from the following: (A) Absolute humidity at a given temperature is equal to weight of moisture present in a unit volume (B) Relative humidity is the ratio of ... of vapours which could be contained at the same temperature when fully saturated (D) All the above

Last Answer : Answer: Option D

Choose the wrong statement. Alcohol is used in manometer, because (A) Its vapour pressure is low (B) It provides suitable meniscus for the inclined tube (C) Its density is less (D) It provides longer length for a given pressure difference

Description : Choose the wrong statement. Alcohol is used in manometer, because (A) Its vapour pressure is low (B) It provides suitable meniscus for the inclined tube (C) Its density is less (D) It provides longer length for a given pressure difference

Last Answer : Answer: Option A

In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) Bubbles from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Description : In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) ... from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Last Answer : (B) Temperature of the heating surface is more than the boiling point of the liquid

The pressure outside a bubble/droplet of liquid is __________ the internal pressure. (A) Greater than (B) Less than (C) Equal to (D) Unpredictable; depends on the bubble size

Description : The pressure outside a bubble/droplet of liquid is __________ the internal pressure. (A) Greater than (B) Less than (C) Equal to (D) Unpredictable; depends on the bubble size

Last Answer : Option B

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation temperature of the liquid (C) Heat transfer from the surface of the liquid is less than that in film boiling (D) The temperature is less than that of film boiling

Description : Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation ... less than that in film boiling (D) The temperature is less than that of film boiling

Last Answer : (D) The temperature is less than that of film boiling

The intensity of pressure at any point, in a liquid, is __________ to the depth of liquid from the surface. (A) Equal (B) Directly proportional (C) Inversely proportional (D) None of these

Description : The intensity of pressure at any point, in a liquid, is __________ to the depth of liquid from the surface. (A) Equal (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B