A Venturimeter cannot be used for the direct measurement of (A) Datum difference in the stretch of pipe-flow (B) Pressure difference in the flow through pipeline(C) Friction loss in pipe flow(D) All (A), (B) and (C)

A Venturimeter cannot be used for the direct measurement of
(A) Datum difference in the stretch of pipe-flow
(B) Pressure difference in the flow through pipeline
(C) Friction loss in pipe flow
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

Which of the following can be used for the direct measurement of volumetric flow rate of slurry? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Description : Which of the following can be used for the direct measurement of volumetric flow rate of slurry? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Last Answer : (C) Rotameter

Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Description : Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Last Answer : (C) Intensity of pressure of the liquid

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Description : The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Last Answer : (B) Directly proportional to square of

__________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge(C) Pitot tube(D) Orificemeter

Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter

Last Answer : (C) Pitot tube

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Description : Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Last Answer : (B) Pipe

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Description : The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Last Answer : e. A particle moving in gravitational field

In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above

Description : In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above

Last Answer : Answer: Option D

Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Description : Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Last Answer : (C) Weir

Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Description : Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Last Answer : (A) Pitot tube

Venturimeter is used to measure the flow rate of fluids in pipes, when the pipe is in __________ position. (A) Horizontal (B) Vertical (C) Inclined (D) Any

Description : Venturimeter is used to measure the flow rate of fluids in pipes, when the pipe is in __________ position. (A) Horizontal (B) Vertical (C) Inclined (D) Any

Last Answer : (D) Any

Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Description : Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Last Answer : (B) Venturimeter

Major loss in sudden contraction in pipe flow is due to (A) Boundary friction (B) Flow contraction (C) Expansion of flow after sudden contraction (D) None of these

Description : Major loss in sudden contraction in pipe flow is due to (A) Boundary friction (B) Flow contraction (C) Expansion of flow after sudden contraction (D) None of these

Last Answer : (B) Flow contraction

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Description : The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Last Answer : (C) Sudden expansion of flow in the downstream occurs

The most suitable flow measuring device for the fluid flow measurement in a very large diameter pipeline is a (A) Weir(B) Pitot tube(C) Kennison nozzle(D) V-notch

Description : The most suitable flow measuring device for the fluid flow measurement in a very large diameter pipeline is a (A) Weir (B) Pitot tube (C) Kennison nozzle (D) V-notch

Last Answer : (B) Pitot tube

A differential manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Description : A differential manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Last Answer : Answer: Option D

A manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Description : A manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Last Answer : Answer: Option B

Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Description : Venturimeter is used to (A) Measure the velocity of a flowing liquid (B) Measure the pressure of a flowing liquid (C) Measure the discharge of liquid flowing in a pipe (D) Measure the pressure difference of liquid flowing between two points in a pipe line

Last Answer : Answer: Option C

Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Last Answer : Answer: Option D

Two pipe systems can be said to be equivalent, when the following quantities are same (A) Friction loss and flow (B) Length and diameter (C) Flow and length (D) Friction factor and diameter

Description : Two pipe systems can be said to be equivalent, when the following quantities are same (A) Friction loss and flow (B) Length and diameter (C) Flow and length (D) Friction factor and diameter

Last Answer : Answer: Option A

The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Description : The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Last Answer : Answer: Option C

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B) The co-efficient of contraction of a Venturimeter is always unity (C) For a fixed pressure drop, the discharge of a gas through a Venturimeter is greater, when compressibility is taken into account, than when it is neglected (D) None of these

Description : Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B ... , when compressibility is taken into account, than when it is neglected (D) None of these

Last Answer : (D) None of these

Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Description : Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Last Answer : (C) More than

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Which of the following factors does not contribute to the pressure drop in a pipeline? (A) Velocity of fluid (B) Size of pipe (C) Length of pipe and number of bends (D) None of these

Description : Which of the following factors does not contribute to the pressure drop in a pipeline? (A) Velocity of fluid (B) Size of pipe (C) Length of pipe and number of bends (D) None of these

Last Answer : (D) None of these

What is the pipe called which lifts water from a reservoir to a greater height than the initial level in the supply reservoir? (A) Penstock (B) Siphon (C) Tunnel (D) Pressure pipeline

Description : What is the pipe called which lifts water from a reservoir to a greater height than the initial level in the supply reservoir? (A) Penstock (B) Siphon (C) Tunnel (D) Pressure pipeline

Last Answer : (B) Siphon

Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Description : Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion ... due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Last Answer : (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings

In a/an __________, the flow rate of fluids is obtained by measuring the difference between the impact and the static pressure. (A) Rotameter (B) Pitot tube (C) Venturimeter (D) Flow nozzle

Description : In a/an __________, the flow rate of fluids is obtained by measuring the difference between the impact and the static pressure. (A) Rotameter (B) Pitot tube (C) Venturimeter (D) Flow nozzle

Last Answer : (B) Pitot tube

For a given fluid flow rate, which of the following incurs maximum head loss? (A) Orificemeter (B) Venturimeter (C) Flow nozzle (D) All of them incur the same head loss

Description : For a given fluid flow rate, which of the following incurs maximum head loss? (A) Orificemeter (B) Venturimeter (C) Flow nozzle (D) All of them incur the same head loss

Last Answer : (A) Orificemeter

Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

In case of Venturimeter, friction losses are about __________ percent of maximum velocity head. (A) 2 (B) 8 (C) 12 (D) 20

Description : In case of Venturimeter, friction losses are about __________ percent of maximum velocity head. (A) 2 (B) 8 (C) 12 (D) 20

Last Answer : (A) 2

Power transmitted through a pipe is maximum when the loss of head due to friction is :

Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero

Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied 

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The pressure head of a flow meter remains constant for (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Description : The pressure head of a flow meter remains constant for (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Last Answer : (C) Rotameter

For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Description : For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Last Answer : (A) Venturimeter

Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Description : Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Last Answer : (A) 1

Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Description : Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Last Answer : (B) 10

The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Description : The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Last Answer : (A) Depends only on Reynolds number

For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Description : For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Last Answer : (A) Logarithmic

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Description : Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Last Answer : A) Pipe length

In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be (A) 1/16 to 1/8 (B) 1/8 to 1/4 (C) 1/4 to 1/3 (D) 1/3 to 1/2

Description : In order to avoid tendency of separation at throat in a Venturimeter, the ratio of the diameter at throat to the diameter of pipe should be (A) 1/16 to 1/8 (B) 1/8 to 1/4 (C) 1/4 to 1/3 (D) 1/3 to 1/2

Last Answer : Answer: Option D