Stack (chimney) height in a big thermal power plant is dictated by the (A) Pollution control aspect (B) Draught to be created (C) Limitation of constructional facilities (D) None of these

Stack (chimney) height in a big thermal power plant is dictated by the
(A) Pollution control aspect
(B) Draught to be created
(C) Limitation of constructional facilities
(D) None of these
by

1 Answer

Answer :

(B) Draught to be created
by

Related questions

For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Description : For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Last Answer : (D) Equal to the height of the hot gas column producing draught

Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Description : Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Last Answer : (B) 10

Which of the following is used to produce draught in the locomotive boilers? (A) Chimney (B) Induced draught fan (C) Forced draught fan (D) Steam jet arrangement

Description : Which of the following is used to produce draught in the locomotive boilers? (A) Chimney (B) Induced draught fan (C) Forced draught fan (D) Steam jet arrangement

Last Answer : Option D

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The draught may be produced by a_________ a) Chimney b) Mechanical fan c) Steam jet d) All of the above

Description : The draught may be produced by a_________ a) Chimney b) Mechanical fan c) Steam jet d) All of the above

Last Answer : d) All of the above

The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Description : The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Last Answer : c) Steam jet

Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Description : Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Last Answer : (C) Too much air for combustion

White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Description : White flue gas (resembling steam) coming out of the chimney of a thermal power plant indicates that the fuel used in the boiler furnace is (A) Tar (B) Coke oven gas (C) Pitch (D) Pulverised coke

Last Answer : (B) Coke oven gas

A prerequisite of effective time management is: 1. Knowing the dictated project completion date 2. Having the most advanced software package for project planning, scheduling and control 3. Having a good project WBS which identifies the major project deliverables and tasks, and the person responsible for each of them 4. Having a well staffed scheduling department

Description : A prerequisite of effective time management is:  1. Knowing the dictated project completion date  2. Having the most advanced software package for project planning, scheduling and control  3. ... and the  person responsible for each of them  4. Having a well staffed scheduling department

Last Answer : 1. Knowing the dictated project completion date

The main advantage of forced draft over natural draft is that (A) Combustion of fuel is complete (B) Smaller height chimney can be used (C) Furnace control is easier (D) All (A), (B) & (C)

Description : The main advantage of forced draft over natural draft is that (A) Combustion of fuel is complete (B) Smaller height chimney can be used (C) Furnace control is easier (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which type of cooling towers operate through a chimney or stack ___ a. Cross flow b. Counter flow c. Hyperbolic d. All of above

Description : Which type of cooling towers operate through a chimney or stack ___ a. Cross flow b. Counter flow c. Hyperbolic d. All of above

Last Answer : Hyperbolic

Define draught, what is the use of draught in thermal power plants?

Description : Define draught, what is the use of draught in thermal power plants?

Last Answer : Draught is defined as a small pressure difference required between the fuel bed (furnace) and outside air to maintain constant flow of air and to discharge the gases through chimney to the atmosphere. ... combustion products through the system. · To remove burnt products from the system

Define Draught, What Is The Use Of Draught In Thermal Power Plants?

Description : Define Draught, What Is The Use Of Draught In Thermal Power Plants?

Last Answer : Draught is defined as a small pressure difference required between the fuel bed (furnace) and outside air to maintain constant flow of air and to discharge the gases through chimney to the atmosphere ... To draw the combustion products through the system. To remove burnt products from the system

Thermal efficiency of furnaces can be improved by (A) Waste heat recovery from flue gas (B) Minimising heat losses from furnace walls(C) Maintaining proper draught(D) All (A), (B) and (C

Description : Thermal efficiency of furnaces can be improved by (A) Waste heat recovery from flue gas (B) Minimising heat losses from furnace walls (C) Maintaining proper draught (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Description : The part of a nuclear power plant that prevents thermal pollution of lakes or rivers is the: w) reactor x) coolant/moderator y) cooling tower z) control rod

Last Answer : ANSWER: Y -- COOLING TOWER

Which of the following sources is responsible for maximum air pollution? (A) Industrial chimney exhaust (B) Forest fire (C) Automobiles exhaust (D) Photochemical oxidation of organic matter

Description : Which of the following sources is responsible for maximum air pollution? (A) Industrial chimney exhaust (B) Forest fire (C) Automobiles exhaust (D) Photochemical oxidation of organic matter

Last Answer : (C) Automobiles exhaust

Are pet laws in the US dictated by federal or state law?

Description : I know California and Texa are known for very lax pet regulations...are there any Federal laws that override pet laws by state?

Last Answer : There are both federal and state laws governing the treatment of animals. The U.S. Department of Agriculture has enacted a number of animals welfare laws. Organizations that work towards humane treatment of all ... pet welfare differ from state to state, it's up to the animal's human to check.

Power required in case of forced draught as compared to induced draught (for the same draught produced) is (A) Same (B) Less (C) More (D) Either more or less; depends on the flue gas density

Description : Power required in case of forced draught as compared to induced draught (for the same draught produced) is (A) Same (B) Less (C) More (D) Either more or less; depends on the flue gas density

Last Answer : (B) Less

Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of – (1) air (2) water (3) noise (4) thermal

Last Answer : (1) air Explanation: An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an ... particles from a flowing gas (such as air) using the force of an induced electrostatic charge.

Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Description : Electrostatic precipitator is used to control the pollution of (1) air (2) water (3) noise (4) thermal

Last Answer : air

Write the strength and limitation of biomass power plant.

Description : Write the strength and limitation of biomass power plant. 

Last Answer : Strength 1) Raw material used as cow dung is easily available in villages, rural area at free of cost. 2) Easy to operate and having less maintenance. 3) No additional Co2 emission to ... 2) For producing gas it takes more time. 3) Initial investment is required for construction of well.

‘Fanning’ smokestack plumes are observed when A. There is an inversion above the ground surface. B. There is unstable atmosphere. C. There is neutrally stable atmosphere. D. The stack height is below an inversion layer.

Description : ‘Fanning’ smokestack plumes are observed when A. There is an inversion above the ground surface. B. There is unstable atmosphere. C. There is neutrally stable atmosphere. D. The stack height is below an inversion layer.

Last Answer : A. There is an inversion above the ground surface

On increasing the temperature the solubility of most of the gases in water decreases. An important consequence of this effect is the thermal pollution of water, such as occurs around power plants cooled by a river or stream. How is the survival of fish affected by thermal pollution of water?

Description : On increasing the temperature the solubility of most of the gases in water decreases. An important consequence of this effect is the thermal pollution of water, such as occurs around power plants cooled by a river or stream. How is the survival of fish affected by thermal pollution of water? 

Last Answer : Ans.: When the water temperature of the river or stream is increases the solubility of oxygen in water decreases. Due to this decrease in dissolved oxygen the survival of fish becomes difficult.

Thermal pollution is more common near a) Hot water springs b) Coal based power plants c) Tropical regions d) Temperate regions.

Description : Thermal pollution is more common near a) Hot water springs b) Coal based power plants c) Tropical regions d) Temperate regions. 

Last Answer : b) Coal based power plants 

The arsenic pollution in ground water in Bangladesh and parts of India is due to (A) industrial waste (B) thermal power plants (C) natural sources (D) agricultural practices

Description : The arsenic pollution in ground water in Bangladesh and parts of India is due to (A) industrial waste (B) thermal power plants (C) natural sources (D) agricultural practices

Last Answer : (C) natural sources

Which of the following is not a source of pollution in soil? (A) Transport sector (B) Agriculture sector (C) Thermal power plants (D) Hydropower plants

Description : Which of the following is not a source of pollution in soil? (A) Transport sector (B) Agriculture sector (C) Thermal power plants (D) Hydropower plants

Last Answer : (D) Hydropower plants 

In mega cities of India, the dominant source of air pollution is (A) transport sector (B) thermal power (C) municipal waste (D) commercial sector

Description : In mega cities of India, the dominant source of air pollution is (A) transport sector (B) thermal power (C) municipal waste (D) commercial sector

Last Answer : (A) transport sector

The efficiency of the plant _____ with the mechanical draught a) Increases b) Decreases c) Remain constant d) None of the above

Description : The efficiency of the plant _____ with the mechanical draught a) Increases b) Decreases c) Remain constant d) None of the above

Last Answer : a) Increases

Communication management: 1. Is important only in projects involving telephone, television, radio, or newspaper production facilities and operations 2. Is not a big problem for people with normal speech, sight and hearing 3. Involves the originator, the message, the medium and the receiver 4. Preparing an agenda

Description : Communication management: 1. Is important only in projects involving telephone, television, radio, or newspaper production  facilities and operations  2. Is not a big problem for people with normal ... . Involves the originator, the message, the medium and the receiver  4. Preparing an agenda

Last Answer : 3. Involves the originator, the message, the medium and the receiver

Which of the following statements is an not an example of an inherent limitation of internal control? a. The effectiveness of control procedures depends on segregation of duties. b. Errors may arise from mistakes in judgments. c. Most internal controls tend to be directed at routine transactions rather than nonroutine transactions. d. The cost-benefit relationship is a primary criterion in designing internal contro

Description : Which of the following statements is an not an example of an inherent limitation of internal control? a. The effectiveness of control procedures depends on segregation of duties. b. ... nonroutine transactions. d. The cost-benefit relationship is a primary criterion in designing internal contro

Last Answer : The effectiveness of control procedures depends on segregation of duties

Inherent limitations in an audit stem from the following factors except a. Use of testing. b. Incompetence of the auditor. c. Internal control limitation. d. Most audit evidence is persuasive rather than conclusive

Description : Inherent limitations in an audit stem from the following factors except a. Use of testing. b. Incompetence of the auditor. c. Internal control limitation. d. Most audit evidence is persuasive rather than conclusive

Last Answer : Incompetence of the auditor

Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Description : Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Last Answer : Because power requirement is high for forced draught

Thermal pollution due to excessive heat & temperature in the working place causes (A) Reduction in working efficiency of manpower (B) Fatigue (C) High breathing rate (D) All (A), (B) & (C)

Description : Thermal pollution due to excessive heat & temperature in the working place causes (A) Reduction in working efficiency of manpower (B) Fatigue (C) High breathing rate (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Description : Thermal pollution of water increases its toxicity and oxidation of oxygen demanding waste besides favouring bacterial growth. A rise in water temperature by 10°C, doubles the toxic effects of __________ present in it. (A) Coal ash (B) Potassium cyanide (C) Ortho-xylene (D) None of these

Last Answer : (B) Potassium cyanide

Which of the following is not a weightless pollutant? (A) SPM (B) Thermal pollution (C) Radioactive rays(D) Noise pollution

Description : Which of the following is not a weightless pollutant? (A) SPM (B) Thermal pollution (D) Noise pollution (C) Radioactive rays

Last Answer : (A) SPM

Ingress of cold air in the furnaces through cracks, charging doors, openings etc(A) Reduces the flue gas temperature and makes the furnace atmosphereoxidising(B) Increases the load on the induced draft fan(C) Reduces the furnace draught(D) All (A), (B) and (C)

Description : Ingress of cold air in the furnaces through cracks, charging doors, openings etc (A) Reduces the flue gas temperature and makes the furnace atmosphere oxidising (B) Increases the load on the induced draft fan (C) Reduces the furnace draught (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Description : Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Last Answer : (A) Blast furnace stove

Artificial draught produced by a fan in the furnace can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of fan blades (D) All (A), (B) and (C)

Description : Artificial draught produced by a fan in the furnace can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of fan blades (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Description : In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Last Answer : (C) Positive pressure exists in the furnace

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Artificial draught produced by a fan can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of the fan blades (D) All (A), (B) and (C

Description : Artificial draught produced by a fan can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of the fan blades (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Boiler draught of 10 mm water column is equivalent to (A) 1 kgf/m2 (B) 10 kgf/m2 (C) 10 kgf/mm2 (D) 1 kgf/mm2

Description : Boiler draught of 10 mm water column is equivalent to (A) 1 kgf/m2 (B) 10 kgf/m2 (C) 10 kgf/mm2 (D) 1 kgf/mm2

Last Answer : (B) 10 kgf/m2

Describe constructional details of single cradle frame with neat sketch.

Description : Describe constructional details of single cradle frame with neat sketch.

Last Answer : Single cradle frame :  The single cradle is the simplest type of motorcycle frame, and looks similar to the first ever motorcycle frames. It is made from steel tubes that surround the engine with a main ... found in off-road motorcycles.  Figure: Typical motor cycle frame of cradle type

Explain the constructional features of Gas filled shock Absorber with sketch.

Description : Explain the constructional features of Gas filled shock Absorber with sketch.

Last Answer : Features: 1. Control tire motion better than non gas shock absorber 2. Vibration is reduced 3. Reduced aeration. 4. Improved handling.

Draw the constructional arrangement of ‘Leaf Spring’ showing all the Parts.

Description : Draw the constructional arrangement of ‘Leaf Spring’ showing all the Parts.

Last Answer : Figure: Constructional Arrangement of Leaf Spring  

Explain with sketch the constructional features of “Anti Lock Braking” System.

Description : Explain with sketch the constructional features of “Anti Lock Braking” System.

Last Answer : Anti lock brake system: Figure shows block diagram of the ABS system. Typically ABS includes a central electronic control unit (ECU), four wheel speed sensors, and at least two hydraulic ... at the affected wheel, thus reducing the braking force on that wheel; the wheel then turns faster.

Draw the constructional diagram of iron core inductor and write the working of it.

Description : Draw the constructional diagram of iron core inductor and write the working of it.

Last Answer : Iron core inductors allow high inductance value but are limited in high frequency capacity due to hysteresis and eddy current losses. Iron core increases the magnetic induction of a ... certain point this result in a useful increase in inductance. Beyond that point, inductance decreases.

With help of constructional diagram, explain working of air-gang capacitor.

Description : With help of constructional diagram, explain working of air-gang capacitor.

Last Answer : Construction of air-gang capacitor : Air gang capacitors are capacitors which use air as their dielectric. The simplest air capacitors are made of two conductive plates separated by an air gap.   ... capacitor. The rotor plates are attached to the shaft that is used to adjust the capacitance. 

With help of constructional diagram, explain working of LDR.

Description : With help of constructional diagram, explain working of LDR.

Last Answer : Working of LDR: Due to the radiant energy supplied to the semiconductor, the covalent bonds are broken and the electron hole pairs are generated resulting into flow of current. These increased ... resistance of the LDR will decrease with increase in the intensity of incident light.