Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80
Last Answer : (D) 80
Description : Percentage of carbon monoxide in blast furnace gas may be around (A) 8 (B) 14 (C) 22 (D) 52
Last Answer : (C) 22
Description : The approximate height of a blast furnace having a useful volume of 2000 m3is about __________ metres (A) 25 (B) 35 (C) 55 (D) 75
Last Answer : (C) 55
Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100
Last Answer : (A) 25-80
Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80
Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen
Last Answer : (C) Blast furnace gas with air
Description : Calorific value of blast furnace gas is around __________ KCal/Nm3 . (A) 850 (B) 1800 (C) 4200 (D) 6500
Last Answer : (A) 850
Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator
Last Answer : (C) Electro-static precipitator
Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Blast furnace stoves are meant for heating (A) Air (B) Blast furnace gas (C) Steam (D) None of these
Last Answer : (A) Air
Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas
Last Answer : (C) Blast furnace gas/mixed gas
Description : Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas
Last Answer : (A) Producer gas
Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas
Last Answer : (A) Blast furnace gas
Description : Which of the following gaseous fuels has the lowest calorific value? (A) Gobar gas (B) Refinery gas (C) Converter gas (D) Blast furnace gas
Last Answer : (D) Blast furnace gas
Description : Explosion limit of blast furnace gas is 37 to 71% gas in gas-air mixture. It means that the blast furnace gas will explode when burnt in a confined space, if its concentration in the gas-air mixture is __________ percent. (A) < 37% (B) > 71% (C) In between 37 & 71% (D) None of these
Last Answer : (C) In between 37 & 71%
Description : Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S
Last Answer : (A) CO
Description : Gross & net calorific value is the same for (A) Blast furnace gas (B) Coke oven gas (C) L.D. converter gas (D) None of these
Last Answer : (C) L.D. converter gas
Description : Mixed gas' used in steel plants is a mixture of (A) B.F. gas and coke oven gas (B) Coke oven gas and converter gas (C) Coke oven gas and L.P.G (D) Blast furnace gas and naphtha vapor
Last Answer : (A) B.F. gas and coke oven gas
Description : Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200
Last Answer : (A) 15-30
Description : Which of the following is the most poisonous gas? (A) Coke oven gas (B) Producer gas (C) Blast furnace gas (D) L.D. converter gas
Last Answer : (D) L.D. converter gas
Description : Coke oven gas compared to blast furnace gas is (A) More explosive and inflammable (B) Less poisonous (C) Lighter (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas
Description : Which of the following is not a by-product fuel? (A) Pitch (B) Blast furnace gas (C) Petrol (D) Refinery gas
Last Answer : (C) Petrol
Description : Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas
Last Answer : (C) Acetylene
Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)
Description : Which of the following will generate maximum volume of product of complete combustion (Nm3 /Nm3 of fuel)? (A) Carburetted water gas (B) Blast furnace gas (C) Natural gas (D) Producers' gas
Last Answer : (C) Natural gas
Description : Out of the following fuels, the difference between gross and net calorific value will be minimum in case of (A) Coke oven gas (B) Water gas (C) Natural gas (D) Blast furnace gas
Description : Which of the following has the highest gross calorific value? (A) Blast furnace gas (B) Coke oven gas (C) Carburetted water gas (D) Oil refinery gas
Last Answer : (D) Oil refinery gas
Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000
Last Answer : (B) 2000
Description : Which is the heaviest fuel gas out of the following? (A) Blast furnace gas (B) Coke oven gas (C) Water gas (D) Carburetted water gas
Description : Which of the following combustibles is absent in blast furnace gas? (A) H2 (B) CH4 (C) CO (D) None of these
Last Answer : (B) CH4
Description : Which of the following fuel gases will require maximum amount of air for combustion of 1 Nm3 gas? (A) Blast furnace gas (B) Natural gas (C) Producer gas (D) Water gas
Last Answer : (B) Natural gas
Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these
Last Answer : (A) Produces more slag when used in the blast furnace
Description : The calorific value is the highest out of the following for (A) Producer gas (B) Water gas (C) Coke oven gas (D) Blast furnace gas
Last Answer : (C) Coke oven gas
Description : Which of the following is a poisonous fuel gas? (A) Coke oven gas (B) Blast furnace gas (C) Natural gas (D) None of these
Last Answer : (B) Blast furnace gas
Description : Blast furnace gas compared to coke oven gas has (A) Lower ignition temperature (B) Narrower limit of inflammability (C) Higher calorific value (D) Lower theoretical flame temperature
Last Answer : (D) Lower theoretical flame temperature
Description : Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal
Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying
Last Answer : (C) Coke oven battery heating
Description : Largest constituent of blast furnace gas is (A) N2 (B) CO (C) CO2 (D) H2
Last Answer : (A) N2
Description : Blast furnace gas is a very poisonous gas because of its predominantly high __________ content. (A) H2O (B) CO2 (C) CO (D) CH4
Last Answer : (C) CO
Description : Out of the following fuels, the difference between the net and gross calorific value is maximum in case of (A) Pitch (B) Fuel oil (C) Blast furnace gas (D) Bituminous coal
Last Answer : (B) Fuel oil
Description : Blast furnace gas constitutes mainly of (A) N2 & CH4 (B) N2 & H2 (C) N2 & CO (D) CH4 & CO2
Last Answer : (C) N2 & CO
Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration
Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)
Description : Which is the most efficient dust removal equipment for removal of submicronic dust particles from blast furnace gas? (A) Packed scrubber (B) Gravity settling chamber (C) Electrostatic precipitator (D) Hydrocyclone
Last Answer : (C) Electrostatic precipitator
Description : Which of the following contains least amount of N2? (A) Coke oven gas (B) Blast furnace gas (C) Producer gas (D) Water gas (blue gas)
Last Answer : (A) Coke oven gas
Description : . Which of the following fuel gases contains maximum amount of carbon monoxide? (A) Coke oven gas (B) Water gas (C) Blast furnace gas (D) L.D. converter gas
Description : In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal
Last Answer : (A) Increases the reducing potential of the gas
Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material
Last Answer : Option C
Description : Percentage of methane in coke oven gas may be around (A) 5 (B) 15 (C) 25 (D) 50
Last Answer : (C) 25
Description : Percentage of hydrogen in coke oven gas may be around (A) 10 (B) 25 (C) 45 (D) 60
Last Answer : (D) 60