RPF guarantees that eachnetwork receives only ____ of the multicast packet.
A)
one copy
B)
two copies
C)
a or b
D)
none of the above

1 Answer

Answer :

none of the above

Related questions

Description : RPB guarantees that eachdestinationreceives _________ of the packet. A) one copy B) no copies C) multiplecopies D) none of the above

Last Answer : one copy

Description : ______ adds pruning and grafting to_______ to create a multicast shortestpath tree that supports dynamic membershipchanges. A) RPM; RPB B) RPB; RPM C) RPF: RPM D) none of the above

Last Answer : RPM; RPB

Description : In RPF,a router forwards only the copy that has traveled the _______path from the source to the router. A) shortest B) longest C) average D) none of the above

Last Answer : shortest

Description : . If there is only one station with a packet to send, this guarantees that there will ………….. For that packet. A. never be a collision B. be a collision C. be an improvement D. direction

Last Answer : A. never be a collision

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

Description : In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : an anycast

Description : In ________, the multicastpacket must reach only those networks that haveactive members for thatparticular group. A) RPF B) RPB C) RPM D) none of the above

Last Answer : RPM

Description : Pruning and grafting are strategiesused in _______. A) RPF B) RPB C) RPM D) none of the above

Last Answer : RPM

Description : RPF eliminates the ________ in theflooding process. A) forwarding B) backwarding C) flooding D) none of the above

Last Answer : none of the above

Description : Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Last Answer : (D) Circuit Switching

Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated only for the first fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Last Answer : An ICMP error message may be generated only for the first fragmen

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

Description : The term ________ means that IP provides no error checking or tracking. IP assumes the unreliabilityof the underlying layers and does its best to get a transmission throughto its destination,but with ... ) reliable delivery B) connection-oriented delivery C) best-effort delivery D) noneof the above

Last Answer : best-effort delivery

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Description : Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Last Answer : 7C:56:21:1A:DE:F4

Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : unicast

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

Description : In IPv6,_________addressdefinesagroup of computers. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : a multicast

Description : In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : aunicast

Description : A multicast message is sent from _______ to _______. A) onesource; one destination B) onesource; multiple destinations C) multiple sources; onedestination D) noneof the above

Last Answer : onesource; multiple destinations

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

Description : IGMP helps a ________ router createand update a list of loyal members relatedto each router interface. A) broadcast B) unicast C) multicast D) noneof the above

Last Answer : multicast

Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated for each fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Last Answer : noneis true

Description : An ARP request is normally _______. A) broadcast B) multicast C) unicast D) noneof the above

Last Answer : broadcast

Description : An ARP reply isnormally_______. A) broadcast B) multicast C) unicast D) noneof the above

Last Answer : unicast

Description : PIM-DM is used in a _______ multicast environment, suchas a LAN. A) dense B) sparse C) a or b D) none of the above

Last Answer : dense

Description : A _______ message tells an upstream router to start sending multicast messages for a specific groupthrough aspecific router. A) weed B) graft C) prune D) none of the above

Last Answer : graft

Description : A _______ message tells an upstream router to stop sending multicast messages for a specific group through aspecific router. A) weed B) graft C) prune D) none of the above

Last Answer : prune

Description : _______ is an implementation of multicast distance vector routing. It is asource-based routing protocol, based on RIP. A) MOSPF B) DVMRP C) CBT D) none of the above

Last Answer : DVMRP

Description : RPB creates a shortest path _______ tree from thesourceto each destination. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

Description : Multicast link state routing uses the _______ tree approach. A) source-based B) group-shared C) a or b D) none of the above

Last Answer : source-based

Description : In multicast routing, eachinvolvedrouter needs toconstructa ________ path tree for each group. A) average B) longest C) shortest D) none of the above

Last Answer : shortest

Description : A one-to-one communication betweenone source and one destination is classified as a _______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Description : A one-to-many communication between one sourceand a specific group of hosts is classifiedas a _______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

Description : A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Description : IPv6 does not support which of the following addressing modes? a. unicast addressing b. multicast addressing c. broadcast addressing d. anycast addressing

Last Answer : c. broadcast addressing

Description : Which of the following IP address class is Multicast? a. Class A b. Class B c. Class C d. Class D

Last Answer : d. Class D

Description : Communication channel is shared by all the machines on the network in ________ a) broadcast network b) unicast network c) multicast network d) anycast network

Last Answer : a) broadcast network

Description : In ______, the router forwards thereceived packet through only one of its interfaces. A) unicasting B) multicasting C) broadcasting D) none of the above

Last Answer : unicasting

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Last Answer : b. a short VC number

Description : In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A ... lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Last Answer : B. Only those packets which are lost or corrupted

Description : In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Last Answer : B. a short VC number

Description : In datagram subnet new route is chosen ………………… (A) for every packet sent (B) for first and last packet sent (C) only for the first packet (D) for the packet which is not transmitted

Last Answer : (A) for every packet sent

Description : Transport layer receives data in the form of? A. Packets B. Byte streams C. Bits stream D. both packet and Byte stream

Last Answer : B. Byte streams