The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate.
A)
synchronous
B)
asynchronous
C)
isochronous
D)
none of the above
by

1 Answer

Answer :

isochronous
by

Related questions

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency. A) synchronous B) statistical C) isochronous D) none of the above

Description : In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency. A) synchronous B) statistical C) isochronous D) none of the above

Last Answer : statistical

In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata. A) synchronous B) statistical C) isochronous D) none of the above

Description : In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata. A) synchronous B) statistical C) isochronous D) none of the above

Last Answer : synchronous

In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Last Answer : Parallel

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

The term ________ means that IP provides no error checking or tracking. IP assumes the unreliabilityof the underlying layers and does its best to get a transmission throughto its destination,but with no guarantees. A) reliable delivery B) connection-oriented delivery C) best-effort delivery D) noneof the above

Description : The term ________ means that IP provides no error checking or tracking. IP assumes the unreliabilityof the underlying layers and does its best to get a transmission throughto its destination,but with ... ) reliable delivery B) connection-oriented delivery C) best-effort delivery D) noneof the above

Last Answer : best-effort delivery

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

The ________ between two words is the number ofdifferences between corresponding bits. A) Hamming code B) Hamming distance C) Hamming rule D) none of the above

Description : The ________ between two words is the number ofdifferences between corresponding bits. A) Hamming code B) Hamming distance C) Hamming rule D) none of the above

Last Answer : Hamming distance

The ________ between two words is the number of differences between corresponding bits A. Hamming code B. Hamming distance C. Hamming rule D. none of the above

Description : The ________ between two words is the number of differences between corresponding bits A. Hamming code B. Hamming distance C. Hamming rule D. none of the above

Last Answer : B. Hamming distance

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

Known as the data transfer scheme that used handmaking principle. A. Synchronous data transfer scheme B. DMA data transfer scheme C. Asynchronous data transfer scheme D. Uninterrupted data transfer scheme

Description : Known as the data transfer scheme that used handmaking principle. A. Synchronous data transfer scheme B. DMA data transfer scheme C. Asynchronous data transfer scheme D. Uninterrupted data transfer scheme

Last Answer : A. Synchronous data transfer scheme

Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband

Description : Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband

Last Answer : C. Baseband

Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Last Answer : B. Data communication equipment

What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Description : What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Last Answer : C. The clocking is derived from the data in synchronous

ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in synchronous transmission C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Description : ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in ... C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Last Answer : B. the clocking is derived from the data in synchronous transmission

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Communiction circuits that transmit data in both directions but not at the same time are operating in a. a simplex mode b. a half duplex mode c. a full duplex mode d. an asynchronous mode

Description : Communiction circuits that transmit data in both directions but not at the same time are operating in a. a simplex mode b. a half duplex mode c. a full duplex mode d. an asynchronous mode

Last Answer : a half duplex mode

State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been the mainstay for data communications. 3). Point-to-Point Protocol (PPP) is a network-specific standard protocol with STD number 51. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Description : A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Last Answer : 6 Kbps

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

. ________ is the process in which the receiver tries to guess the message by using redundant bits A. Connection-Oriented Service B. Forward error correctionC. both a and b D. Confirm

Description : . ________ is the process in which the receiver tries to guess the message by using redundant bits A. Connection-Oriented Service B. Forward error correction C. both a and b D. Confirm

Last Answer : B. Forward error correction

RPB guarantees that eachdestinationreceives _________ of the packet. A) one copy B) no copies C) multiplecopies D) none of the above

Description : RPB guarantees that eachdestinationreceives _________ of the packet. A) one copy B) no copies C) multiplecopies D) none of the above

Last Answer : one copy

RPF guarantees that eachnetwork receives only ____ of the multicast packet. A) one copy B) two copies C) a or b D) none of the above

Description : RPF guarantees that eachnetwork receives only ____ of the multicast packet. A) one copy B) two copies C) a or b D) none of the above

Last Answer : none of the above

. If there is only one station with a packet to send, this guarantees that there will ………….. For that packet. A. never be a collision B. be a collision C. be an improvement D. direction

Description : . If there is only one station with a packet to send, this guarantees that there will ………….. For that packet. A. never be a collision B. be a collision C. be an improvement D. direction

Last Answer : A. never be a collision

In ________ routing, we assume that there is one node (or more) ineach autonomous system that acts on behalf of the entire autonomous system. A) distant vector B) path vector C) link state D) none of the above

Description : In ________ routing, we assume that there is one node (or more) ineach autonomous system that acts on behalf of the entire autonomous system. A) distant vector B) path vector C) link state D) none of the above

Last Answer : path vector

What is the difference between synchronous generator & asynchronous generator?

Description : What is the difference between synchronous generator & asynchronous generator?

Last Answer : In simple, synchronous generator supply’s both active and reactive power but asynchronous generator (induction generator) supply’s only active power and observes reactive power for magnetizing. This type of generators is used in windmills.

What Is The Difference Between Synchronous Generator & Asynchronous Generator?

Description : What Is The Difference Between Synchronous Generator & Asynchronous Generator?

Last Answer : In simple, synchronous generator supply’s both active and reactive power but asynchronous generator(induction generator) supply’s only active power and observe reactive power for magnetizing. This type of generators are used in windmills.

Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Description : Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Last Answer : B. Asynchronous

Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Description : Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Last Answer : D. They have clock recovery circuits

In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Last Answer : B. synchronous

Are events synchronous of asynchronous?

Description : Are events synchronous of asynchronous? 

Last Answer : Asynchronous

Batch is synchronous or Asynchronous operations?

Description : Batch is synchronous or Asynchronous operations?

Last Answer : Ans: Asynchronous operations. 

What is the difference between synchronous generator and asynchronous generator?

Description : What is the difference between synchronous generator and asynchronous generator?

Last Answer :  In simple, synchronous generator supplies’ both active and reactive power but asynchronous generator (induction generator) supply’s only active power and observe reactive power for magnetizing. This type of generators is used in windmills.

The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Description : The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Last Answer : (C) synchronous

77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Description : 77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Last Answer : Asynchronous generator