Description : We discussed ______ popular controlled-access methods. A) two B) three C) four D) none of the above
Last Answer : three
Description : Packet-switched networks can alsobe divided into ______subcategories: virtual-circuit networks and datagram networks A) four B) three C) two D) five
Last Answer : two
Description : In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above
Last Answer : 64
Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above
Last Answer : none of the above
Description : In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above
Last Answer : aunicast
Description : In IPv6, _______ address defines a single computer A. a unicast B. a multicast C. an anycast D. none of the above
Last Answer : A. a unicast
Description : Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above
Last Answer : byte
Description : In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime
Last Answer : from least significant to the most significant
Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom
Last Answer : from left to the right, bottom to top
Description : To make SONET backward-compatible with the current hierarchy, its framedesign includes asystem of. A) OCs B) STMs C) STSs D) VTs
Last Answer : VTs
Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)
Last Answer : bidirectional.
Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)
Last Answer : point-to-point
Description : SONET network topologies can be__________. A) linear B) ring C) mesh D) all of theabove
Last Answer : ring
Description : SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000
Last Answer : 2000
Description : A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove
Last Answer : add/drop multiplexers
Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)
Last Answer : either (a) or (b)
Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)
Last Answer : SDH
Description : IEEE hasdefined the specifications fora wireless LAN, called _______, whichcovers the physical and data link layers. A) IEEE 802.3 B) IEEE 802.5 C) IEEE 802.11 D) IEEE 802.2
Last Answer : IEEE 802.11
Description : A _______ is a connecting devicethat operates in the physical and data link layers of theInternet model. A) repeater B) bridge C) router D) none of the above
Last Answer : bridge
Description : The TCP/IP _______ layer is equivalent to the combined session, presentation, and application layers of the OSI model. a.data link b.network c.physical d.application
Last Answer : d.application
Description : .In the OSI model, as a data packet moves from the lower to the upper layers, headers are _______ a. Added b. Removed c. Rearranged d. Randomized
Last Answer : b. Removed
Description : In the OSI model, as a data packet moves from the lower to the upper layers, headers are _______ a) Added b) Removed c) Rearranged d) Randomized
Last Answer : b) Removed
Description : The ATM standard defines______ layers. A) two B) three C) four D) five
Description : In respect of OSI model, LANs implement a. lower two layers b. all seven layers c. upper five layers d. None of the above
Last Answer : b. all seven layers
Description : We have categorizedaccess methods into _______ groups. A) two B) three C) four D) five
Description : A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description
Last Answer : Process description
Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF
Last Answer : BSS; ESS
Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above
Last Answer : 1-persistent
Description : IEEE 802.1d specification, defines _________criteria for a transparent bridges. A) two B) three C) four D) none of the above
Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above
Last Answer : data; signal
Description : The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude
Last Answer : bandwidth-delay
Description : For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass
Last Answer : noiseless
Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above
Last Answer : physical
Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3
Last Answer : 1
Description : In IPv6, the ________ prefix defines the purpose of the address. A) type B) purpose C) both a and b D) none of the above
Last Answer : type
Description : In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above
Last Answer : an anycast
Description : In classless addressing, the prefix length defines the_____________. A) netid B) hostid C) mask D) none of the above
Last Answer : mask
Description : In IGMP, the general query message ___________________ group. A) doesnot define a particular B) explicitly defines a C) candefine more thanone D) noneof the above
Last Answer : doesnot define a particular
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX
Last Answer : a. 1000 BASE-T
Description : Application layer protocol defines ____ a.types of messages exchanged b.message format, syntax and semantics c.rules for when and how processes send and respond to messages d.all of the mentioned
Last Answer : d.all of the mentioned
Description : What is the main function of Session layer in OSI model? a. Defines how data is formatted between the devices b. Made physical connection between server and client c. Both a and b d. None of the above
Last Answer : a. Defines how data is formatted between the devices
Description : In classless addressing,the netid length defines the _____________ A. prefix B. hostid C. mask D. none of the above
Last Answer : C. mask
Description : What is the number of separate protocol layers at the serial interface gateway specified by the X.25 standard? a. 4 b. 2 c. 6 d. 3 3. none of the above
Last Answer : 3
Description : How many OSI layers are covered in the X.25 standard? a. Two b. Three c. Seven d. Six e. None of above
Last Answer : . Three
Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers
Last Answer : the physical and data link layers
Description : The term ________ means that IP provides no error checking or tracking. IP assumes the unreliabilityof the underlying layers and does its best to get a transmission throughto its destination,but with ... ) reliable delivery B) connection-oriented delivery C) best-effort delivery D) noneof the above
Last Answer : best-effort delivery
Description : In which OSI layers does the FDDI protocol operate? A) Physical B) Data link C) Network D) A and B
Last Answer : D) A and B
Description : Which layers of the OSI determines the interface often system with the user? A) Network B) Application C) Data link D) Session
Last Answer : B) Application
Description : Which of the following OSI layers correspond to TCP/IP's application layer? A) Application B) IP Address C) Session D) All of the above
Last Answer : D) All of the above
Description : TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport
Last Answer : A) Application