For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate.
A)
noisy
B)
noiseless
C)
bandpass
D)
low-pass
by

1 Answer

Answer :

noiseless
by

Related questions

For a ______ channel, we need to use the Shannon capacity tofind the maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Description : For a ______ channel, we need to use the Shannon capacity tofind the maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Last Answer : noisy

If the available channel is a ____channel, wecannot send a digital signaldirectly to thechannel. A) low-pass B) bandpass C) low rate D) high rate

Description : If the available channel is a ____channel, wecannot send a digital signaldirectly to thechannel. A) low-pass B) bandpass C) low rate D) high rate

Last Answer : bandpass

A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Description : A noiseless 3 KHz Channel transmits bits with binary level signals. What is the maximum data rate? A. 3 Kbps B. 6 Kbps C. 12 Kbps D. 24 Kbps

Last Answer : 6 Kbps

Baseband transmission of adigital signal is possible only if wehave a ____channel. A) low-pass B) bandpass C) low rate D) high rate

Description : Baseband transmission of adigital signal is possible only if wehave a ____channel. A) low-pass B) bandpass C) low rate D) high rate

Last Answer : ow-pass

______ sets the limit on the maximum capacity of a channel with a given noise level. A. Hartley theorem B. Shannon-hartley theorem C. Nyquist theorem D. Shannon theorem

Description : ______ sets the limit on the maximum capacity of a channel with a given noise level. A. Hartley theorem B. Shannon-hartley theorem C. Nyquist theorem D. Shannon theorem

Last Answer : B. Shannon-hartley theorem

The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Last Answer : data; signal

A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

What theorem sets a limit on the maximum capacity of a channel with a given noise level? A. Nyquist theorem B. Hartley law C. Shannon-Hartley theorem D. Shannon theorem

Description : What theorem sets a limit on the maximum capacity of a channel with a given noise level? A. Nyquist theorem B. Hartley law C. Shannon-Hartley theorem D. Shannon theorem

Last Answer : C. Shannon-Hartley theorem

________ sets a limit on the maximum capacity of a channel with a give noise level. A. Hartley theorem B. Shannon-Hartley theorem C. Nyquist theorem D. Shannon theorem

Description : ________ sets a limit on the maximum capacity of a channel with a give noise level. A. Hartley theorem B. Shannon-Hartley theorem C. Nyquist theorem D. Shannon theorem

Last Answer : B. Shannon-Hartley theorem

In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above

Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above

Last Answer : physical

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Description : The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Last Answer : twice thehighest frequencyof a signal

If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

Description : If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

Last Answer : 1200 samples/s

Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Description : Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Last Answer : b. Selective Repeat ARQ

Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Description : Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Last Answer : byte

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

In ATM,______ is for constant-bit-ratedata. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Description : In ATM,______ is for constant-bit-ratedata. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Last Answer : AAL1

What is the channel capacity of a noisy channel with conditional probability of error p = 1/2?

Description : What is the channel capacity of a noisy channel with conditional probability of error p = 1/2? A) 0 B) 1 C) Infinity D) 2  

Last Answer : What is the channel capacity of a noisy channel with conditional probability of error p = 1/2?  A) 0 B) 1 C) Infinity D) 2  

As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel

Description : As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by (symbols/notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 

Last Answer : As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by ( ... /notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 

The noise output of a resistor is amplified by a noiseless amplifier having a gain of 60 and a bandwidth of 20 kHz. A meter connected at the output of the amplifier reads 1mV RMS. If the bandwidth of the amplifier is reduced to 5kHz, its gain remaining constant, what does the meter read now? A. 0.5 mV B. 0.5 µV C. 5.0 mV D. 5.0 µV

Description : The noise output of a resistor is amplified by a noiseless amplifier having a gain of 60 and a bandwidth of 20 kHz. A meter connected at the output of the amplifier reads 1mV RMS. If the bandwidth of the amplifier is reduced to ... does the meter read now? A. 0.5 mV B. 0.5 µV C. 5.0 mV D. 5.0 µV

Last Answer : A. 0.5 mV

The type of flooring suitable for use in churches, theatres, public libraries and other places where noiseless floor covering is desired is (A) Cork flooring (B) Glass flooring (C) Wooden flooring (D) Linoleum flooring

Description : The type of flooring suitable for use in churches, theatres, public libraries and other places where noiseless floor covering is desired is (A) Cork flooring (B) Glass flooring (C) Wooden flooring (D) Linoleum flooring

Last Answer : Answer: Option A

ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Description : ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Last Answer : C. twice

Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Description : Classify data networks. Explain with the help of Nyquist theorem, the data rate limitations in PSTN’s. Give an account of modems used in data transfer. Explain their importance and list some of the V-series recommendations.

Last Answer : Classifications of Data Network:  Data Networks are classified according to their geographical coverage: Wide area networks (WANs) Metropolitan area networks(MANs) Local area ...  V.53 Limits for the maintenance of telephone type circuits used for data transmission. 

As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Description : As per Nyquist criterion the sampling rate is (A) 2fs (B) (1/2)fs (C) (1/2fs) (D) (2/fs) Where fs is the signal frequency

Last Answer : (A) 2fs

State sampling theorem. Define Nyquist rate.

Description : State sampling theorem. Define Nyquist rate.

Last Answer : SAMPLING THEOREM: Sampling theorem states that a band-limited signal of finite energy having the highest frequency component fm Hz can be represented and recovered completely from a set of samples taken ... frequency should be equal to or greater than twice the maximum signal frequency (fs≥ 2fm)

A set of information that defines the status of resources allocated to a process isa. Process controlb. ALUc. Register Unitd. Process description

Description : A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description

Last Answer : Process description

The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Description : The IEEE 802.11standardfor wireless LANs defines twoservices: ______and_______. A) BSS; ASS B) ESS; SSS C) BSS; ESS D) BSS; DCF

Last Answer : BSS; ESS

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

IEEE 802.1d specification, defines _________criteria for a transparent bridges. A) two B) three C) four D) none of the above

Description : IEEE 802.1d specification, defines _________criteria for a transparent bridges. A) two B) three C) four D) none of the above

Last Answer : three

The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude

Description : The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude

Last Answer : bandwidth-delay

SONET defines _______ layers. A) twoB)threeC)fourD)five

Description : SONET defines _______ layers. A) two B) three C) four D) five

Last Answer : four

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

In IPv6, the ________ prefix defines the purpose of the address. A) type B) purpose C) both a and b D) none of the above

Description : In IPv6, the ________ prefix defines the purpose of the address. A) type B) purpose C) both a and b D) none of the above

Last Answer : type

In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above

Description : In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : an anycast

In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above

Description : In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : aunicast

In classless addressing, the prefix length defines the_____________. A) netid B) hostid C) mask D) none of the above

Description : In classless addressing, the prefix length defines the_____________. A) netid B) hostid C) mask D) none of the above

Last Answer : mask

In IGMP, the general query message ___________________ group. A) doesnot define a particular B) explicitly defines a C) candefine more thanone D) noneof the above

Description : In IGMP, the general query message ___________________ group. A) doesnot define a particular B) explicitly defines a C) candefine more thanone D) noneof the above

Last Answer : doesnot define a particular

IEEE 802.3ab defines Gigabit Ethernet transmission over unshieldedtwisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX

Last Answer : a. 1000 BASE-T

Application layer protocol defines ____ a.types of messages exchanged b.message format, syntax and semantics c.rules for when and how processes send and respond to messages d.all of the mentioned

Description : Application layer protocol defines ____ a.types of messages exchanged b.message format, syntax and semantics c.rules for when and how processes send and respond to messages d.all of the mentioned

Last Answer : d.all of the mentioned

What is the main function of Session layer in OSI model? a. Defines how data is formatted between the devices b. Made physical connection between server and client c. Both a and b d. None of the above

Description : What is the main function of Session layer in OSI model? a. Defines how data is formatted between the devices b. Made physical connection between server and client c. Both a and b d. None of the above

Last Answer : a. Defines how data is formatted between the devices

In IPv6, _______ address defines a single computer A. a unicast B. a multicastC. an anycast D. none of the above

Description : In IPv6, _______ address defines a single computer A. a unicast B. a multicast C. an anycast D. none of the above

Last Answer : A. a unicast

In classless addressing,the netid length defines the _____________ A. prefix B. hostid C. mask D. none of the above

Description : In classless addressing,the netid length defines the _____________ A. prefix B. hostid C. mask D. none of the above

Last Answer : C. mask

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Last Answer : c. 62 subnets and 1022 hosts.

For pure ALOHA, the maximum channel utilization is a. 100% b. 50% c. 36% d. 18%

Description : For pure ALOHA, the maximum channel utilization is a. 100% b. 50% c. 36% d. 18%

Last Answer : d. 18%

The purpose of stacking elements on an antenna. A. Sharper directional pattern B. increased gain C. Improved bandpass D. All of these

Description : The purpose of stacking elements on an antenna. A. Sharper directional pattern B. increased gain C. Improved bandpass D. All of these

Last Answer : D. All of these

The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Last Answer : B. bandpass filter

Define Bandpass filter.

Description : Define Bandpass filter.

Last Answer : The bandpass filter is the combination of high and low pass filters, and this allows a specified range of frequencies to pass through.

What method provides the widest bandpass?

Description : What method provides the widest bandpass?

Last Answer : A swamping resistor in parallel with the tuned circuit.

Demodulation is the process of A. converting digital signals toanalog signals B. converting analogsignals todigital signals C. combining many low speed channels into onehigh speed channel D. dividing the high-speed signals into frequency bands E. None of the above

Description : Demodulation is the process of A. converting digital signals toanalog signals B. converting analogsignals todigital signals C. combining many low speed channels into onehigh speed channel D. dividing the high-speed signals into frequency bands E. None of the above

Last Answer : converting analogsignals todigital signals