SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000

SONET sends ________ frames per second
A)
1000
B)
2000
C)
4000
D)
8000
by

1 Answer

Answer :

2000
by

Related questions

SONET sends ________ frames per second

Description : SONET sends ________ frames per second

Last Answer : 8000

Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Description : Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Last Answer : Answer: Option A

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000

Description : Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 8000 (D) 15000

Last Answer : (C) 8000

Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000

Description : Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000

Last Answer : (B) 4000

Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait B) Simplest

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ............... (A) 64 Kbps (B) 32 Mbps (C) 32 Kbps (D) 64 Mbps

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ............... (A) 64 Kbps (B) 32 Mbps (C) 32 Kbps (D) 64 Mbps

Last Answer : (C) 32 Kbps

Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated to decrease the risk of systemic bleeding. Which of the following true statement(s) concerning the use of thrombolytic agents for arterial occlusion is/are true? a. A standard technique involves infusing high-dose urokinase, 4000 units per minute for 1–2 hours, directly into the clot by a catheter embedded in the thrombus b. If progress is made, further fibrinolytic therapy is given at 1000 to 2000 units per minute until clot lysis has occurred c. The usual infusion time by the above-stated technique is usually in excess of 24 hours d. Successful clot lysis occurs more frequently in arterial graf

Description : Thrombolytic therapy has become a useful adjunct in the management of peripheral arterial occlusion. In this setting, direct intraarterial administration rather than intravenous has been advocated ... may be indicated for situations where complete clot evacuation cannot be accomplished surgically

Last Answer : Answer: a, b, e The most popular method for intraarterial thrombolytic therapy for arterial occlusion involves passing a guidewire through the thrombus with arteriographic guidance and ... acute arterial occlusion) or when distal vasculative is occluded and precludes appropriate inflow patency

If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost of excavation by machine will be equal to the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Description : If the excavation of earth is done manually then it costs Rs. 10 per cum. A machine can excavate at a fixed cost of Rs. 4000 plus a variable cost of Rs. 2 per cum. The quantity of earth for which the cost ... the cost of manual excavation is (A) 500 cum (B) 1000 cum (C) 1500 cum (D) 2000 cum

Last Answer : (A) 500 cum

As per USP, number of theoretical plates for an analyte peak in HPLC must be? A. More than 2000 B. More than 1000 C. More than 3000 D. More than 4000

Description : As per USP, number of theoretical plates for an analyte peak in HPLC must be? A. More than 2000 B. More than 1000 C. More than 3000 D. More than 4000

Last Answer : A. More than 2000

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

The monthly incomes of two persons are in the ratio 5 : 4 and their monthly expenditures are in the ratio 9 : 7. If each person saves Rs. 500 per month, then what are their monthly incomes? a) Rs 8000 and Rs 10000 b) Rs 3750 and Rs 3000 c) Rs 5000 and Rs 4000 d) Rs 4500 and Rs 4000 e) None of the above

Description : The monthly incomes of two persons are in the ratio 5 : 4 and their monthly expenditures are in the ratio 9 : 7. If each person saves Rs. 500 per month, then what are their monthly incomes? a) Rs 8000 and Rs ... Rs 3750 and Rs 3000 c) Rs 5000 and Rs 4000 d) Rs 4500 and Rs 4000 e) None of the above

Last Answer : Let the incomes of two persons be 5x and 4x let the expenditures of them be 9y and 7y Each person saves Rs. 500 Therefore, 5x - 9y = 500 4x - 7y = 500 Solving the above equations, 20x - 36y = 2000 20x - ... = 500 + 9(500) = 5000 X = 1000 Hence, their salaries are Rs. 5000 and Rs. 4000 Answer: c)

Simple interest on a certain sum of money for 4 years at 5% per annum is half the compound interest on Rs. 8000 for 2 years at 10% per annum. The sum placed on simple interest is: a) Rs.4200 b) b)Rs.4250 c) Rs.5250 d) Rs.5200 e) Rs.4000

Description : Simple interest on a certain sum of money for 4 years at 5% per annum is half the compound interest on Rs. 8000 for 2 years at 10% per annum. The sum placed on simple interest is: a) Rs.4200 b) b)Rs.4250 c) Rs.5250 d) Rs.5200 e) Rs.4000

Last Answer : a C.I = 8000 * (1+(10/100))2 –8000  = 8000 *110/100 * 110/100 – 8000 = 9680 – 8000 = Rs.1680 Therefore, S.I = C.I / 2 = 1680 / 2=Rs. 840 840 = sum * 4 * 5 / 100 :. Sum = Rs.(840 * 100)/ (4 *5) = Rs.4200

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Last Answer : 1000

Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Last Answer : Ans: C

Elevation of temperate region from sea level ranges: a. 1000-2000 m b. 2500-3000 m c. 3500-4000 m d. b & c

Description : Elevation of temperate region from sea level ranges: a. 1000-2000 m b. 2500-3000 m c. 3500-4000 m d. b & c

Last Answer : b & c

The maximum delivery pressure of a reciprocating compressor may be about __________ kg/cm2 . (A) 1000 (B) 2000 (C) 3000 (D) 4000

Description : The maximum delivery pressure of a reciprocating compressor may be about __________ kg/cm2 . (A) 1000 (B) 2000 (C) 3000 (D) 4000

Last Answer : (D) 4000

Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Description : Heating value of coal is approximately in power plant (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg.

Last Answer : 5000-6500 kcal / kg

Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Description : Two Pelton turbines A and B have the same specific speed and are working under the same head. Turbine A produces 400 kW at 1000 rpm. If turbine B produces 100kW, then its rpm is (a) 4000 (b) 2000 (c) 1500 (d) 3000

Last Answer : (b) 2000

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

To create a neighborhood relationship,a router running BGP sends an ________ message. A) open B) update C) keepalive D) none of the above

Description : To create a neighborhood relationship,a router running BGP sends an ________ message. A) open B) update C) keepalive D) none of the above

Last Answer : open

SONET frames have considerably more ____________________ than do DS frames for information about signal routing and setup.

Description : SONET frames have considerably more ____________________ than do DS frames for information about signal routing and setup.

Last Answer : overhead

The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Last Answer : none of the above

Disolved oxygen (DO) in water should be? A. 400 to 800 ppm B. 4000 to 8000 ppm C. 0.4 to 0.5 ppm D. 4 to 5 ppm (Answer)

Description : Disolved oxygen (DO) in water should be? A. 400 to 800 ppm B. 4000 to 8000 ppm C. 0.4 to 0.5 ppm D. 4 to 5 ppm (Answer)

Last Answer : D. 4 to 5 ppm (Answer)

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Last Answer : b. 2 Mbps

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Last Answer : a. 2 Mbps

Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Description : Each ________in a SONET framecancarry a digitized voice channel. A) bit B) byte C) frame D) none of the above

Last Answer : byte

In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime

Description : In SONET, for each byte, the bitsare transmitted ____________. A) from least significant to the most significant B) from most significant tothe least significant C) two at atime D) three at atime

Last Answer : from least significant to the most significant

In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Description : In SONET, for each frame, the bytes are transmitted __________. A) from left to the right, top to bottom B) from right to theleft, bottom to top C) from left to the right, bottom to top D) from right to the left, top to bottom

Last Answer : from left to the right, bottom to top

To make SONET backward-compatible with the current hierarchy, its framedesign includes asystem of. A) OCs B) STMs C) STSs D) VTs

Description : To make SONET backward-compatible with the current hierarchy, its framedesign includes asystem of. A) OCs B) STMs C) STSs D) VTs

Last Answer : VTs

A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Last Answer : bidirectional.

A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Last Answer : point-to-point

SONET network topologies can be__________. A) linear B) ring C) mesh D) all of theabove

Description : SONET network topologies can be__________. A) linear B) ring C) mesh D) all of theabove

Last Answer : ring

In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above

Description : In SONET each frame lasts _______ microseconds. A) 20 B) 64 C) 128 D) none of the above

Last Answer : 64

A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Description : A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Last Answer : add/drop multiplexers

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

SONET defines _______ layers. A) twoB)threeC)fourD)five

Description : SONET defines _______ layers. A) two B) three C) four D) five

Last Answer : four

______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : either (a) or (b)

isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Description : If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Last Answer : 1000 bps

If the baudrate fora 64-QAM signal is 2000, what is the bit rate? A) 300 B) 400 C) 1000 D) 12000

Description : If the baudrate fora 64-QAM signal is 2000, what is the bit rate? A) 300 B) 400 C) 1000 D) 12000

Last Answer : 12000

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.

Description : A sample rate of ________is required for a good quality representation of telephone conversation. (A) 4500 times per second. (B) 700 integer sample points per minute. (C) 50 times per second per mile of distance travelled. (D) 8000 times per second.

Last Answer : (C) 50 times per second per mile of distance travelled.