In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata. A) synchronous B) statistical C) isochronous D) none of the above

In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata.
A)
synchronous
B)
statistical
C)
isochronous
D)
none of the above
by

1 Answer

Answer :

synchronous
by

Related questions

In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency. A) synchronous B) statistical C) isochronous D) none of the above

Description : In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency. A) synchronous B) statistical C) isochronous D) none of the above

Last Answer : statistical

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Description : We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Last Answer : TDM

In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

Ina synchronous modem, the receive equilizer is known as a. adaptive equilizer b. impariment equilizer c. statistical equilizer d. compromise equilizer

Description : Ina synchronous modem, the receive equilizer is known as a. adaptive equilizer b. impariment equilizer c. statistical equilizer d. compromise equilizer

Last Answer : adaptive equilizer

Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Description : Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Last Answer : C. TDM

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Last Answer : FDM

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Last Answer : FDM; QAM

The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSSC)FHSSD)TDM

Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : FHSS

_____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

_____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

_____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above

Description : ____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Last Answer : WDM

In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Description : In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Last Answer : greater than

Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Description : Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Last Answer : (a) and (c)

An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Description : An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Last Answer : TDM-n

Each connection link in ANN is associated with ________ which has information about the input signal. A. neurons B. weights C. bias D. activation function

Description : Each connection link in ANN is associated with ________ which has information about the input signal. A. neurons B. weights C. bias D. activation function

Last Answer : B. weights

The term ________ means that IP provides no error checking or tracking. IP assumes the unreliabilityof the underlying layers and does its best to get a transmission throughto its destination,but with no guarantees. A) reliable delivery B) connection-oriented delivery C) best-effort delivery D) noneof the above

Description : The term ________ means that IP provides no error checking or tracking. IP assumes the unreliabilityof the underlying layers and does its best to get a transmission throughto its destination,but with ... ) reliable delivery B) connection-oriented delivery C) best-effort delivery D) noneof the above

Last Answer : best-effort delivery

In a ________ connection, three or more devices share a link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Description : In a ________ connection, three or more devices share a link. A) multipoint B) point-to-point C) (a) and(b) D) none of the above

Last Answer : multipoint

A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Description : A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Last Answer : C. port

. ________ is the process in which the receiver tries to guess the message by using redundant bits A. Connection-Oriented Service B. Forward error correctionC. both a and b D. Confirm

Description : . ________ is the process in which the receiver tries to guess the message by using redundant bits A. Connection-Oriented Service B. Forward error correction C. both a and b D. Confirm

Last Answer : B. Forward error correction

In FTP, the well-known port ____ is used for the control connection and the well-known port ________ for the data connection A. 21; 22 B. 21; 20 C. 20; 21 D. none of the above

Description : In FTP, the well-known port ____ is used for the control connection and the well-known port ________ for the data connection A. 21; 22 B. 21; 20 C. 20; 21 D. none of the above

Last Answer : B. 21; 20

Three or more devices share a link in ________ connection. a) Unipoint b) Multipoint c) Point to point d) Simplex

Description : Three or more devices share a link in ________ connection. a) Unipoint b) Multipoint c) Point to point d) Simplex

Last Answer : b) Multipoint

Where was India’s first computer installed and when? a. Indian Institute of Technology, Delhi, 1977 b. Indian Institute of Science, Bangalore, 1971 c. Indian Iron & Steel Co. Ltd., 1968 d. Indian Statistical Institute, Calcutta, 1955

Description : Where was India’s first computer installed and when? a. Indian Institute of Technology, Delhi, 1977 b. Indian Institute of Science, Bangalore, 1971 c. Indian Iron & Steel Co. Ltd., 1968 d. Indian Statistical Institute, Calcutta, 1955

Last Answer : Indian Statistical Institute, Calcutta, 1955

In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Last Answer : Parallel

In the illustration, the contacts between terminals 26 and 27 should be closed when _________. EL-0046 A. using one generator in isochronous mode only B. using two or more generators in parallel only C. the prime mover speed is to remain constant through varying loads in parallel or single operation D. the circuit breaker is closed for that generator

Description : In the illustration, the contacts between terminals 26 and 27 should be closed when _________. EL-0046 A. using one generator in isochronous mode only B. using two or more generators in ... through varying loads in parallel or single operation D. the circuit breaker is closed for that generator

Last Answer : Answer: C

Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications

Description : Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications

Last Answer : B. Isochronous

In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Accountants performing important parts of the work failed to discover a close relationship between the treasurer and the cashier. b. The auditor planned the work in a hasty and inefficient manner. c. Statistical sampling techniques were not used on the audit engagement. d. The fraud was perpetrated by one client employee, who circumvented the existing internal control

Description : In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Accountants performing important parts of the ... . The fraud was perpetrated by one client employee, who circumvented the existing internal control

Last Answer : The auditor planned the work in a hasty and inefficient manner.

In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Statistical sampling techniques were not used on the audit engagement. b. The fraud was perpetrated by one client employee, who circumvented the existing internal control. c. The auditor planned the work in a hasty and inefficient manner. d. Accountants performing important partsof the work failed to discover a closerelationship between the treasurer andthe cashie

Description : In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Statistical sampling techniques were not used on ... partsof the work failed to discover a close relationship between the treasurer and the cashie

Last Answer : The auditor planned the work in a hasty and inefficient manner.

Research ethics has a direct connection more often with which stages of research ? (A) Defining and delimiting the scope of research. (B) Problem formulation and reporting of research findings. (C) Defining the population and deciding the sampling technique for research. (D) Deciding about statistical techniques and data analysis.

Description : Research ethics has a direct connection more often with which stages of research ? (A) Defining and delimiting the scope of research. (B) Problem formulation and reporting of research ... deciding the sampling technique for research. (D) Deciding about statistical techniques and data analysis.

Last Answer : (B) Problem formulation and reporting of research findings. 

A company forfeited 30 equity shares of Rs. 10 each fully called-up, for non-payment of allotment money of Rs. 3 and call-money of Rs. 4 per share. If these shares are reissued at Rs. 8 per share fully paid, the amount transferable to capital reserve will be– (A) Rs. 300 (B) Rs. 60 (C) Rs. 90 (D) Rs. 30

Description : A company forfeited 30 equity shares of Rs. 10 each fully called-up, for non-payment of allotment money of Rs. 3 and call-money of Rs. 4 per share. If these shares are reissued at Rs. 8 per share fully paid, the amount ... to capital reserve will be- (A) Rs. 300 (B) Rs. 60 (C) Rs. 90 (D) Rs. 30

Last Answer : Answer: Rs. 30

X Limited forfeited Ram’s 20 shares of Rs. 10 each on which Rs. 7 is called up. Ram had paid application and allotment money of Rs. 5 per share. Of these forfeited shares 15 shares were reissued to Hari as fully paid up for Rs. 6 per share. What amount should be transferred to Capital Reserve account ? (A) Rs. 15 (B) Rs. 20 (C) Rs. 75 (D) Rs. 100

Description : X Limited forfeited Ram's 20 shares of Rs. 10 each on which Rs. 7 is called up. Ram had paid application and allotment money of Rs. 5 per share. Of these forfeited shares 15 shares were reissued to Hari as fully paid up ... to Capital Reserve account ? (A) Rs. 15 (B) Rs. 20 (C) Rs. 75 (D) Rs. 100

Last Answer : Answer: Rs. 15

XYZ Ltd. issued 10,000 shares of Rs. 100 each at Rs. 120 per share with Rs. 25 on application, Rs. 45 on allotment including premium, Rs. 20 on first call and Rs. 30 on final call. Govind who held 200 shares did not pay any call money and his shares were forfeited. What is the amount to be credited to Share Forfeiture Account on forfeiture ? (A) Rs. 14,000 (B) Rs. 10,000 (C) Rs. 9,000 (D) Rs. 4,000

Description : XYZ Ltd. issued 10,000 shares of Rs. 100 each at Rs. 120 per share with Rs. 25 on application, Rs. 45 on allotment including premium, Rs. 20 on first call and Rs. 30 on final call. Govind who held 200 shares did not pay ... forfeiture ? (A) Rs. 14,000 (B) Rs. 10,000 (C) Rs. 9,000 (D) Rs. 4,000

Last Answer : Answer: Rs. 10,000

The Hadoop list includes the HBase database, the Apache Mahout ________ system, and matrix operations. a) Machine learning b) Pattern recognition c) Statistical classification d) Artificial intelligence

Description : The Hadoop list includes the HBase database, the Apache Mahout ________ system, and matrix operations. a) Machine learning b) Pattern recognition c) Statistical classification d) Artificial intelligence

Last Answer : Machine learning

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambleb. receiver section of a synchronous modem contains the scrambler c. transmission section of a synchronous modem contains the scrambler d. control section of a synchronous modem contains the scrambler e. none of the abover

Description : Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambler b. receiver section of a synchronous modem contains the scrambler c. transmission section of ... d. control section of a synchronous modem contains the scrambler e. none of the above

Last Answer : transmission section of a synchronous modem contains the scrambler

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)