Known as the data transfer scheme that used handmaking principle. A. Synchronous data transfer scheme B. DMA data transfer scheme C. Asynchronous data transfer scheme D. Uninterrupted data transfer scheme

Known as the data transfer scheme that used handmaking principle.
A. Synchronous data transfer scheme
B. DMA data transfer scheme
C. Asynchronous data transfer scheme
D. Uninterrupted data transfer scheme
by

1 Answer

Answer :

A. Synchronous data transfer scheme
by

Related questions

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband

Description : Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband

Last Answer : C. Baseband

Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Last Answer : B. Data communication equipment

What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Description : What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Last Answer : C. The clocking is derived from the data in synchronous

ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in synchronous transmission C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Description : ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in ... C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Last Answer : B. the clocking is derived from the data in synchronous transmission

Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Description : Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Last Answer : B. Asynchronous

Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Description : Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Last Answer : D. They have clock recovery circuits

In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Last Answer : B. synchronous

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem D. C modem

Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem D. C modem

Last Answer : B. X modem

What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem

Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem

Last Answer : B. X modem

ECE Board Exam March 1996 What is the IBM’s asynchronous data link protocol designation? A. 83 B B. 8A1 / 8B1 C. 93 B D. 9A1/ 9B1

Description : ECE Board Exam March 1996 What is the IBM’s asynchronous data link protocol designation? A. 83 B B. 8A1 / 8B1 C. 93 B D. 9A1/ 9B1

Last Answer : A. 83 B

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

An interface that provides I/O transfer of data directly to and form the memory unit and peripheral is termed as________ A. DDA B. Serial interface C. Direct Memory Access (DMA) D. None of the Above

Description : An interface that provides I/O transfer of data directly to and form the memory unit and peripheral is termed as________ A. DDA B. Serial interface C. Direct Memory Access (DMA) D. None of the Above

Last Answer : C. Direct Memory Access (DMA)

Which is an important data transfer technique . a. CPU b. DMA Cc. CAD d. None of these

Description : Which is an important data transfer technique . a. CPU b. DMA Cc. CAD d. None of these

Last Answer : b. DMA

The DMA controllers are special hardware embedded into the chip in modern integrate processor that ____and_____ to the system; a. Data transfer b. arbitrate access c. Both A and B d. None of these

Description : The DMA controllers are special hardware embedded into the chip in modern integrate processor that ____and_____ to the system; a. Data transfer b. arbitrate access c. Both A and B d. None of these

Last Answer : c. Both A and B

Asynchronous protocol is A. message oriented B. clock oriented C. bit oriented D. character oriented

Description : Asynchronous protocol is A. message oriented B. clock oriented C. bit oriented D. character oriented

Last Answer : D. character oriented

What is the difference between synchronous generator & asynchronous generator?

Description : What is the difference between synchronous generator & asynchronous generator?

Last Answer : In simple, synchronous generator supply’s both active and reactive power but asynchronous generator (induction generator) supply’s only active power and observes reactive power for magnetizing. This type of generators is used in windmills.

What Is The Difference Between Synchronous Generator & Asynchronous Generator?

Description : What Is The Difference Between Synchronous Generator & Asynchronous Generator?

Last Answer : In simple, synchronous generator supply’s both active and reactive power but asynchronous generator(induction generator) supply’s only active power and observe reactive power for magnetizing. This type of generators are used in windmills.

Are events synchronous of asynchronous?

Description : Are events synchronous of asynchronous? 

Last Answer : Asynchronous

Batch is synchronous or Asynchronous operations?

Description : Batch is synchronous or Asynchronous operations?

Last Answer : Ans: Asynchronous operations. 

What is the difference between synchronous generator and asynchronous generator?

Description : What is the difference between synchronous generator and asynchronous generator?

Last Answer :  In simple, synchronous generator supplies’ both active and reactive power but asynchronous generator (induction generator) supply’s only active power and observe reactive power for magnetizing. This type of generators is used in windmills.

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)

In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Last Answer : Parallel

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Description : The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Last Answer : (C) synchronous

77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Description : 77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Last Answer : Asynchronous generator

A developer wants to process all transactions in the sequence specified by the application. Which type of Remote Function Call (RFC) implementation do you recommend? A. Background RFC (bgRFC) B. Asynchronous RFC (aRFC) C. Synchronous RFC (sRFC) D. Transactional RFC (tRFC)

Description : A developer wants to process all transactions in the sequence specified by the application. Which type of Remote Function Call (RFC) implementation do you recommend? A. Background RFC (bgRFC) B. Asynchronous RFC (aRFC) C. Synchronous RFC (sRFC) D. Transactional RFC (tRFC)

Last Answer : D. Transactional RFC (tRFC)

How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro controllers a) 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Description : How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro ... 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Last Answer : c) 1, 3 respectively

Batch is synchronous or Asynchronous operations?

Description : Batch is synchronous or Asynchronous operations?

Last Answer : Asynchronous operations.

The output of a JK flipflop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’ with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) By applying J = 1, K = 0 and using the clock. (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Description : The output of a JK flipflop with asynchronous preset and clear inputs is 1'. The output can be changed to 0' with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) ... (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Last Answer : Ans: C Preset state of JK Flip-Flop =1 With J=1 K=1 and the clock next state will be complement of the present state.

The essential difference between traps and interrupts is (A) traps are asynchronous and interrupts are synchronous with the program (B) traps are synchronous and interrupts are asynchronous with the program (C) traps are synchronous and interrupts are asynchronous with the I/O devices. (D) None of these.

Description : The essential difference between traps and interrupts is (A) traps are asynchronous and interrupts are synchronous with the program (B) traps are synchronous and interrupts are asynchronous with the program ( ... synchronous and interrupts are asynchronous with the I/O devices. (D) None of these.

Last Answer : (B) traps are synchronous and interrupts are asynchronous with the program

Compare synchronous and asynchronous communication.

Description : Compare synchronous and asynchronous communication.

Last Answer : Synchronous communication Asynchronous communication Single clock is used for both transmitter and receiver Two different clocks are used for both transmitter and receiver Data bits are transmitted ... Character is received at a any rate Less reliable More reliable

Compare characteristics of asynchronous and synchronous transmission mode.

Description : Compare characteristics of asynchronous and synchronous transmission mode (four points). 

Last Answer : Synchronous transmission Asynchronous transmission 1. Synchronous transmission are synchronized by an external clock. 1. Asynchronous transmission are synchronized by special signals along the transmission ... for transferring a small amount of data as it is simple and economical.

Compare synchronous and asynchronous counter.

Description : Compare synchronous and asynchronous counter.

Last Answer : Asynchronous Counter Synchronous Counter In an Asynchronous Counter the output of one Flip Flop acts as the clock Input of the next Flip Flop. In a Synchronous Counter all the Flip Flop's are ... Also called as serial counter Also called as Parallel Counter

Compare Asynchronous sequential and synchronous sequential circuits.

Description : Compare Asynchronous sequential and synchronous sequential circuits.

Last Answer : SR. NO. ASYNCHRONOUS SEQUENTIAL CIRCUIT SYNCHRONOUS SEQUENTIAL CIRCUITS. 1 Output can be changed at any instant of time by changing the input Output changes at discrete ... the counter change state simultaneously. This is because all the flip-flops are clocked simultaneously.

Synchronous vs asynchronous logic

Description : Synchronous vs asynchronous logic

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Asynchronous circuits are usually faster than synchronous circuits because

Description : Asynchronous circuits are usually faster than synchronous circuits because

Last Answer : Asynchronous circuits are usually faster than synchronous circuits because they are free running and do not depend on the frequency of the clock

What is the difference between synchronous and asynchronous motors?

Description : What is the difference between synchronous and asynchronous motors?

Last Answer : The motor which rotates at constant speed is called synchronous motor. And that constant speed is called as synchronous speed.  And the motor which does not rotates at constant speed are called asynchronous motor. Asynchronous motor is also called as Induction motor.

what is the difference between synchronous and asynchronous motor?

Description : what is the difference between synchronous and asynchronous motor?

Last Answer : Asynchronous motors and syncrouns motor are called as dc machines.  and also syncrouns motor called as induction motor. Asynonymous motor as are rotates with constant speed we not able to operate . ... It is able to operate. These are a small difference between syncrouns and asynchronous motors. 

The mode of DMA are: a. Single transfer b. Block transfer c. Burst –block transfer d. Repeated single transfer e. Repeated–block transfer f. Repeated Burst –block transfer g. All of these

Description : The mode of DMA are: a. Single transfer b. Block transfer c. Burst –block transfer d. Repeated single transfer e. Repeated–block transfer f. Repeated Burst –block transfer g. All of these

Last Answer : g. All of these

A DMA controller transfers 32-bit words to memory using cycle Stealing. The words are assembled from a device that transmits characters at a rate of 4800 characters per second. The CPU is fetching and executing instructions at an average rate of one million instructions per second. By how much will the CPU be slowed down because of the DMA transfer? (A) 0.06% (B) 0.12% (C) 1.2% (D) 2.5%

Description : A DMA controller transfers 32-bit words to memory using cycle Stealing. The words are assembled from a device that transmits characters at a rate of 4800 characters per second. The CPU is fetching and executing instructions at an average ... of the DMA transfer? (A) 0.06% (B) 0.12% (C) 1.2% (D) 2.5%

Last Answer : Answer: B