In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency. A) synchronous B) statistical C) isochronous D) none of the above

In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency.
A)
synchronous
B)
statistical
C)
isochronous
D)
none of the above
by

1 Answer

Answer :

statistical
by

Related questions

In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata. A) synchronous B) statistical C) isochronous D) none of the above

Description : In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata. A) synchronous B) statistical C) isochronous D) none of the above

Last Answer : synchronous

In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above

Last Answer : none of the above

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Description : We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above

Last Answer : TDM

Which of the following statements is incorrect for Parallel Virtual Machine (PVM)? (A) The PVM Communication model provides asynchronous blocking send, asynchronous blocking receive and non-blocking receive function. (B) Message buffers are allocated dynamically. (C) The PVM communication model assumes that any task can send a message to any other PVM task and that there is no limit to the size or number of such messages. (D) In PVM Model, the message order is not preserved.

Description : Which of the following statements is incorrect for Parallel Virtual Machine (PVM)? (A) The PVM Communication model provides asynchronous blocking send, asynchronous blocking receive and non-blocking receive function. ... of such messages. (D) In PVM Model, the message order is not preserved. 

Last Answer : (D) In PVM Model, the message order is not preserved.

Ina synchronous modem, the receive equilizer is known as a. adaptive equilizer b. impariment equilizer c. statistical equilizer d. compromise equilizer

Description : Ina synchronous modem, the receive equilizer is known as a. adaptive equilizer b. impariment equilizer c. statistical equilizer d. compromise equilizer

Last Answer : adaptive equilizer

Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Description : Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing

Last Answer : C. TDM

Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for multiple access transmission media C. a form of TDMA in which circuit switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Description : Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Last Answer : d. All of the above

. In a kernel configuration feature, . if ……………...is selected, the dynamically loadable module is loaded the first time a call is made to the kernel that requires the module. A. "m" B. "Y" C. "n" D. "r"

Description : . In a kernel configuration feature, . if ……………...is selected, the dynamically loadable module is loaded the first time a call is made to the kernel that requires the module. A. "m" B. "Y" C. "n" D. "r"

Last Answer : A. "m"

Routes are built automatically by………………….., manually by the system administrator, or dynamically by routing protocols. A. route B. traceroute C. ifconfig D. netstat

Description : Routes are built automatically by………………….., manually by the system administrator, or dynamically by routing protocols. A. route B. traceroute C. ifconfig D. netstat

Last Answer : C. ifconfig

A set of information that defines the status of resources allocated to a process isa. Process controlb. ALUc. Register Unitd. Process description

Description : A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description

Last Answer : Process description

In______, each station is allocated a band to send its data. In other words, each band is reservedfor a specific station,and it belongs to the station all the time. A) FDMA B) TDMA C) CDMAD)none of the above

Description : In______, each station is allocated a band to send its data. In other words, each band is reservedfor a specific station,and it belongs to the station all the time. A) FDMA B) TDMA C) CDMA D) none of the above

Last Answer : FDMA

DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Last Answer : FDM; QAM

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSSC)FHSSD)TDM

Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : FHSS

_____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

_____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

_____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above

Description : ____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Last Answer : WDM

In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Description : In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to

Last Answer : greater than

Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Last Answer : FDM

Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Description : Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Last Answer : (a) and (c)

An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Description : An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above

Last Answer : TDM-n

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board? a. Motherboard b. Breadboard c. Daughter board d. Grandmother board

Description : In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board? a. Motherboard b. Breadboard c. Daughter board d. Grandmother board

Last Answer : Motherboard

Eight stations arecompeting for the use of a sharedchannelusing the'Adaptive tree Walk Protocol'. If the stations 7 and8 are suddenly become ready at once, how many bit slots areneeded toresolve the contention? A. 7 slots B. 5 slots C. 10 slots D. 14 slots

Description : Eight stations arecompeting for the use of a sharedchannelusing the'Adaptive tree Walk Protocol'. If the stations 7 and8 are suddenly become ready at once, how many bit slots areneeded toresolve the contention? A. 7 slots B. 5 slots C. 10 slots D. 14 slots

Last Answer : 7 slots

________ can beachievedbyusing multiplexing; ______ canbe achieved by using spreading. A) Efficiency; privacy and antijamming B) Privacyand antijamming;efficiency C) Privacyand efficiency; antijamming D) Efficiency and antijamming; privacy

Description : ________ can beachievedbyusing multiplexing; ______ canbe achieved by using spreading. A) Efficiency; privacy and antijamming B) Privacyand antijamming;efficiency C) Privacyand efficiency; antijamming D) Efficiency and antijamming; privacy

Last Answer : Efficiency; privacy and antijammin

Where was India’s first computer installed and when? a. Indian Institute of Technology, Delhi, 1977 b. Indian Institute of Science, Bangalore, 1971 c. Indian Iron & Steel Co. Ltd., 1968 d. Indian Statistical Institute, Calcutta, 1955

Description : Where was India’s first computer installed and when? a. Indian Institute of Technology, Delhi, 1977 b. Indian Institute of Science, Bangalore, 1971 c. Indian Iron & Steel Co. Ltd., 1968 d. Indian Statistical Institute, Calcutta, 1955

Last Answer : Indian Statistical Institute, Calcutta, 1955

In the illustration, the contacts between terminals 26 and 27 should be closed when _________. EL-0046 A. using one generator in isochronous mode only B. using two or more generators in parallel only C. the prime mover speed is to remain constant through varying loads in parallel or single operation D. the circuit breaker is closed for that generator

Description : In the illustration, the contacts between terminals 26 and 27 should be closed when _________. EL-0046 A. using one generator in isochronous mode only B. using two or more generators in ... through varying loads in parallel or single operation D. the circuit breaker is closed for that generator

Last Answer : Answer: C

Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications

Description : Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications

Last Answer : B. Isochronous

The Hadoop list includes the HBase database, the Apache Mahout ________ system, and matrix operations. a) Machine learning b) Pattern recognition c) Statistical classification d) Artificial intelligence

Description : The Hadoop list includes the HBase database, the Apache Mahout ________ system, and matrix operations. a) Machine learning b) Pattern recognition c) Statistical classification d) Artificial intelligence

Last Answer : Machine learning

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambleb. receiver section of a synchronous modem contains the scrambler c. transmission section of a synchronous modem contains the scrambler d. control section of a synchronous modem contains the scrambler e. none of the abover

Description : Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambler b. receiver section of a synchronous modem contains the scrambler c. transmission section of ... d. control section of a synchronous modem contains the scrambler e. none of the above

Last Answer : transmission section of a synchronous modem contains the scrambler

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)

In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Last Answer : Parallel

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above